FreeBSD manual
download PDF document: bmtoa.1.pdf
BITMAP(1) FreeBSD General Commands Manual BITMAP(1)
NAME
bitmap, bmtoa, atobm - bitmap editor and converter utilities for the X
Window System
SYNOPSIS
bitmap [ -options ... ] [ filename ] [ basename ]
bmtoa [ -chars ... ] [ filename ]
atobm [ -chars cc ] [ -name variable ] [ -xhot number ] [ -yhot number
] [ filename ]
DESCRIPTION
The bitmap program is a rudimentary tool for creating or editing
rectangular images made up of 1's and 0's. Bitmaps are used in X for
defining clipping regions, cursor shapes, icon shapes, and tile and
stipple patterns.
The bmtoa and atobm filters convert bitmap files (FILE FORMAT) to and
from ASCII strings. They are most commonly used to quickly print out
bitmaps and to generate versions for including in text.
COMMAND LINE OPTIONS
Bitmap supports the standard X Toolkit command line arguments (see
X(7)). The following additional arguments are supported as well.
-size WIDTHxHEIGHT
Specifies size of the grid in squares.
-sw dimension
Specifies the width of squares in pixels.
-sh dimension
Specifies the height of squares in pixels.
-gt dimension
Grid tolerance. If the square dimensions fall below the specified
value, grid will be automatically turned off.
-grid, +grid
Turns on or off the grid lines.
-axes, +axes
Turns on or off the major axes.
-dashed, +dashed
Turns on or off dashing for the frame and grid lines.
-stippled, +stippled
Turns on or off stippling of highlighted squares.
-proportional, +proportional
Turns proportional mode on or off. If proportional mode is on,
square width is equal to square height. If proportional mode is
off, bitmap will use the smaller square dimension, if they were
initially different.
Specifies the color used for highlighting.
-fr color
Specifies the color used for the frame and grid lines.
filename
Specifies the bitmap to be initially loaded into the program. If
the file does not exist, bitmap will assume it is a new file.
basename
Specifies the basename to be used in the C code output file. If it
is different than the basename in the working file, bitmap will
change it when saving the file.
Bmtoa accepts the following option:
-chars cc
This option specifies the pair of characters to use in the string
version of the bitmap. The first character is used for 0 bits and
the second character is used for 1 bits. The default is to use
dashes (-) for 0's and sharp signs (#) for 1's.
Atobm accepts the following options:
-chars cc
This option specifies the pair of characters to use when converting
string bitmaps into arrays of numbers. The first character
represents a 0 bit and the second character represents a 1 bit.
The default is to use dashes (-) for 0's and sharp signs (#) for
1's.
-name variable
This option specifies the variable name to be used when writing out
the bitmap file. The default is to use the basename of the
filename command line argument or leave it blank if the standard
input is read.
-xhot number
This option specifies the X coordinate of the hotspot. Only
positive values are allowed. By default, no hotspot information is
included.
-yhot number
This option specifies the Y coordinate of the hotspot. Only
positive values are allowed. By default, no hotspot information is
included.
USAGE
Bitmap displays grid in which each square represents a single bit in
the picture being edited. Actual size of the bitmap image, as it would
appear normally and inverted, can be obtained by pressing Meta-I key.
You are free to move the image popup out of the way to continue
editing. Pressing the left mouse button in the popup window or Meta-I
again will remove the real size bitmap image.
If the bitmap is to be used for defining a cursor, one of the squares
in the images may be designated as the hot spot. This determines where
the cursor is actually pointing. For cursors with sharp tips (such as
arrows or fingers), this is usually at the end of the tip; for
EDITING
To edit a bitmap image simply click on one of the buttons with drawing
commands (Point, Curve, Line, Rectangle, etc.) and move the pointer
into the bitmap grid window. Press one of the buttons on your mouse
and the appropriate action will take place. You can either set, clear
or invert the gird squares. Setting a grid square corresponds to
setting a bit in the bitmap image to 1. Clearing a grid square
corresponds to setting a bit in the bitmap image to 0. Inverting a
grid square corresponds to changing a bit in the bitmap image from 0 to
1 or 1 to 0, depending what its previous state was. The default
behavior of mouse buttons is as specified below.
MouseButton1 Set
MouseButton2 Invert
MouseButton3 Clear
MouseButton4 Clear
MouseButton5 Clear
This default behavior can be changed by setting the button function
resources. An example is provided below.
bitmap*button1Function: Set
bitmap*button2Function: Clear
bitmap*button3Function: Invert
etc.
The button function applies to all drawing commands, including copying,
moving and pasting, flood filling and setting the hot spot.
DRAWING COMMANDS
Here is the list of drawing commands accessible through the buttons at
the left side of the application's window. Some commands can be
aborted by pressing A inside the bitmap window, allowing the user to
select different guiding points where applicable.
Clear
This command clears all bits in the bitmap image. The grid squares
will be set to the background color. Pressing C inside the bitmap
window has the same effect.
Set This command sets all bits in the bitmap image. The grid squares
will be set to the foreground color. Pressing S inside the bitmap
window has the same effect.
Invert
This command inverts all bits in the bitmap image. The grid
squares will be inverted appropriately. Pressing I inside the
bitmap window has the same effect.
Mark
This command is used to mark an area of the grid by dragging out a
rectangular shape in the highlighting color. Once the area is
marked, it can be operated on by a number of commands (see Up,
Down, Left, Right, Rotate, Flip, Cut, etc.) Only one marked area
can be present at any time. If you attempt to mark another area,
the old mark will vanish. The same effect can be achieved by
pressing Shift-MouseButton1 and dragging out a rectangle in the
grid window. Pressing Shift-MouseButton2 will mark the entire grid
This command is used to copy an area of the grid from one location
to another. If there is no marked grid area displayed, Copy
behaves just like Mark described above. Once there is a marked
grid area displayed in the highlighting color, this command has two
alternative behaviors. If you click a mouse button inside the
marked area, you will be able to drag the rectangle that represents
the marked area to the desired location. After you release the
mouse button, the area will be copied. If you click outside the
marked area, Copy will assume that you wish to mark a different
region of the bitmap image, thus it will behave like Mark again.
Move
This command is used to move an area of the grid from one location
to another. Its behavior resembles the behavior of Copy command,
except that the marked area will be moved instead of copied.
Flip Horizontally
This command will flip the bitmap image with respect to the
horizontal axes. If a marked area of the grid is highlighted, it
will operate only inside the marked area. Pressing H inside the
bitmap window has the same effect.
Up This command moves the bitmap image one pixel up. If a marked area
of the grid is highlighted, it will operate only inside the marked
area. Pressing UpArrow inside the bitmap window has the same
effect.
Flip Vertically
This command will flip the bitmap image with respect to the
vertical axes. If a marked area of the grid is highlighted, it
will operate only inside the marked area. Pressing V inside the
bitmap window has the same effect.
Left
This command moves the bitmap image one pixel to the left. If a
marked area of the grid is highlighted, it will operate only inside
the marked area. Pressing LeftArrow inside the bitmap window has
the same effect.
Fold
This command will fold the bitmap image so that the opposite
corners become adjacent. This is useful when creating bitmap
images for tiling. Pressing F inside the bitmap window has the
same effect.
Right
This command moves the bitmap image one pixel to the right. If a
marked area of the grid is highlighted, it will operate only inside
the marked area. Pressing RightArrow inside the bitmap window has
the same effect.
Rotate Left
This command rotates the bitmap image 90 degrees to the left
(counter clockwise.) If a marked area of the grid is highlighted,
it will operate only inside the marked area. Pressing L inside the
bitmap window has the same effect.
Down
This command moves the bitmap image one pixel down. If a marked
operate only inside the marked area. Pressing R inside the bitmap
window has the same effect.
Point
This command will change the grid squares underneath the mouse
pointer if a mouse button is being pressed down. If you drag the
mouse button continuously, the line may not be continuous,
depending on the speed of your system and frequency of mouse motion
events.
Curve
This command will change the grid squares underneath the mouse
pointer if a mouse button is being pressed down. If you drag the
mouse button continuously, it will make sure that the line is
continuous. If your system is slow or bitmap receives very few
mouse motion events, it might behave quite strangely.
Line
This command will change the gird squares in a line between two
squares. Once you press a mouse button in the grid window, bitmap
will highlight the line from the square where the mouse button was
initially pressed to the square where the mouse pointer is located.
By releasing the mouse button you will cause the change to take
effect, and the highlighted line will disappear.
Rectangle
This command will change the gird squares in a rectangle between
two squares. Once you press a mouse button in the grid window,
bitmap will highlight the rectangle from the square where the mouse
button was initially pressed to the square where the mouse pointer
is located. By releasing the mouse button you will cause the
change to take effect, and the highlighted rectangle will
disappear.
Filled Rectangle
This command is identical to Rectangle, except at the end the
rectangle will be filled rather than outlined.
Circle
This command will change the gird squares in a circle between two
squares. Once you press a mouse button in the grid window, bitmap
will highlight the circle from the square where the mouse button
was initially pressed to the square where the mouse pointer is
located. By releasing the mouse button you will cause the change
to take effect, and the highlighted circle will disappear.
Filled Circle
This command is identical to Circle, except at the end the circle
will be filled rather than outlined.
Flood Fill
This command will flood fill the connected area underneath the
mouse pointer when you click on the desired square. Diagonally
adjacent squares are not considered to be connected.
Set Hot Spot
This command designates one square in the grid as the hot spot if
this bitmap image is to be used for defining a cursor. Pressing a
mouse button in the desired square will cause a diamond shape to be
one, that is, pressing Undo after Undo will undo itself.
FILE MENU
The File menu commands can be accessed by pressing the File button and
selecting the appropriate menu entry, or by pressing Ctrl key with
another key. These commands deal with files and global bitmap
parameters, such as size, basename, filename etc.
New This command will clear the editing area and prompt for the name of
the new file to be edited. It will not load in the new file.
Load
This command is used to load a new bitmap file into the bitmap
editor. If the current image has not been saved, user will be
asked whether to save or ignore the changes. The editor can edit
only one file at a time. If you need interactive editing, run a
number of editors and use cut and paste mechanism as described
below.
Insert
This command is used to insert a bitmap file into the image being
currently edited. After being prompted for the filename, click
inside the grid window and drag the outlined rectangle to the
location where you want to insert the new file.
Save
This command will save the bitmap image. It will not prompt for
the filename unless it is said to be <none>. If you leave the
filename undesignated or -, the output will be piped to stdout.
Save As
This command will save the bitmap image after prompting for a new
filename. It should be used if you want to change the filename.
Resize
This command is used to resize the editing area to the new number
of pixels. The size should be entered in the WIDTHxHEIGHT format.
The information in the image being edited will not be lost unless
the new size is smaller that the current image size. The editor
was not designed to edit huge files.
Rescale
This command is used to rescale the editing area to the new width
and height. The size should be entered in the WIDTHxHEIGHT format.
It will not do antialiasing and information will be lost if you
rescale to the smaller sizes. Feel free to add you own algorithms
for better rescaling.
Filename
This command is used to change the filename without changing the
basename nor saving the file. If you specify - for a filename, the
output will be piped to stdout.
Basename
This command is used to change the basename, if a different one
from the specified filename is desired.
Quit
This command will terminate the bitmap application. If the file
axes, zooming, cut and paste, etc.
Image
This command will display the image being edited and its inverse in
its actual size in a separate window. The window can be moved away
to continue with editing. Pressing the left mouse button in the
image window will cause it to disappear from the screen.
Grid
This command controls the grid in the editing area. If the grid
spacing is below the value specified by gridTolerance resource (8
by default), the grid will be automatically turned off. It can be
enforced by explicitly activating this command.
Dashed
This command controls the stipple for drawing the grid lines. The
stipple specified by dashes resource can be turned on or off by
activating this command.
Axes
This command controls the highlighting of the main axes of the
image being edited. The actual lines are not part of the image.
They are provided to aid user when constructing symmetrical images,
or whenever having the main axes highlighted helps your editing.
Stippled
This command controls the stippling of the highlighted areas of the
bitmap image. The stipple specified by stipple resource can be
turned on or off by activating this command.
Proportional
This command controls the proportional mode. If the proportional
mode is on, width and height of all image squares are forced to be
equal, regardless of the proportions of the bitmap window.
Zoom
This command controls the zoom mode. If there is a marked area of
the image already displayed, bitmap will automatically zoom into
it. Otherwise, user will have to highlight an area to be edited in
the zoom mode and bitmap will automatically switch into it. One
can use all the editing commands and other utilities in the zoom
mode. When you zoom out, undo command will undo the whole zoom
session.
Cut This commands cuts the contents of the highlighted image area into
the internal cut and paste buffer.
Copy
This command copies the contents of the highlighted image area into
the internal cut and paste buffer.
Paste
This command will check if there are any other bitmap applications
with a highlighted image area, or if there is something in the
internal cut and paste buffer and copy it to the image. To place
the copied image, click in the editing window and drag the outlined
image to the position where you want to place i, and then release
the button.
another bitmap editor simply highlight the desired area by using the
Mark command or pressing the shift key and dragging the area with the
left mouse button. When the selected area becomes highlighted, any
other applications (such as xterm, etc.) that use primary selection
will discard their selection values and unhighlight the appropriate
information. Now, use the Paste command for the Edit menu or control
mouse button to copy the selected part of image into another (or the
same) bitmap application. If you attempt to do this without a visible
highlighted image area, the bitmap will fall back to the internal cut
and paste buffer and paste whatever was there stored at the moment.
WIDGETS
Below is the widget structure of the bitmap application. Indentation
indicates hierarchical structure. The widget class name is given
first, followed by the widget instance name. All widgets except the
bitmap widget are from the standard Athena widget set.
Bitmap bitmap
TransientShell image
Box box
Label normalImage
Label invertedImage
TransientShell input
Dialog dialog
Command okay
Command cancel
TransientShell error
Dialog dialog
Command abort
Command retry
TransientShell qsave
Dialog dialog
Command yes
Command no
Command cancel
Paned parent
Form formy
MenuButton fileButton
SimpleMenu fileMenu
SmeBSB new
SmeBSB load
SmeBSB insert
SmeBSB save
SmeBSB saveAs
SmeBSB resize
SmeBSB rescale
SmeBSB filename
SmeBSB basename
SmeLine line
SmeBSB quit
MenuButton editButton
SimpleMenu editMenu
SmeBSB image
SmeBSB grid
SmeBSB dashed
SmeBSB axes
SmeBSB stippled
SmeBSB proportional
SmeBSB zoom
Form form
Command clear
Command set
Command invert
Toggle mark
Command unmark
Toggle copy
Toggle move
Command flipHoriz
Command up
Command flipVert
Command left
Command fold
Command right
Command rotateLeft
Command down
Command rotateRight
Toggle point
Toggle curve
Toggle line
Toggle rectangle
Toggle filledRectangle
Toggle circle
Toggle filledCircle
Toggle floodFill
Toggle setHotSpot
Command clearHotSpot
Command undo
COLORS
If you would like bitmap to be viewable in color, include the following
in the #ifdef COLOR section of the file you read with xrdb:
*customization: -color
This will cause bitmap to pick up the colors in the app-defaults color
customization file:
/usr/local/share/X11/app-defaults/Bitmap-color
BITMAP WIDGET
Bitmap widget is a stand-alone widget for editing raster images. It is
not designed to edit large images, although it may be used in that
purpose as well. It can be freely incorporated with other applications
and used as a standard editing tool. The following are the resources
provided by the bitmap widget.
Bitmap Widget
Header file Bitmap.h
Class bitmapWidgetClass
Class Name Bitmap
Superclass Bitmap
All the Simple Widget resources plus ...
grid Grid Boolean True
stippled Stippled Boolean True
proportional Proportional Boolean True
axes Axes Boolean False
squareWidth SquareWidth Dimension 16
squareHeight SquareHeight Dimension 16
margin Margin Dimension 16
xHot XHot Position NotSet (-1)
yHot YHot Position NotSet (-1)
button1Function Button1Function DrawingFunction Set
button2Function Button2Function DrawingFunction Invert
button3Function Button3Function DrawingFunction Clear
button4Function Button4Function DrawingFunction Invert
button5Function Button5Function DrawingFunction Invert
filename Filename String None ("")
basename Basename String None ("")
AUTHOR
Davor Matic, MIT X Consortium
X Version 11 bitmap 1.0.9 BITMAP(1)