• Start
• Documentation
  • PostgreSQL
  • mnoGoSearch
  • Apache 2.4
  • FreeBSD handbook
  • FreeBSD Manual
  • FreeBSD Source
• Tools
• Search
• Protected Area

plain

FreeBSD manual

keyword 1 2 3 4 5 6 7 8 9 n l

download PDF document: ffmpeg-formats.1.pdf

FFMPEG-FORMATS(1) FFMPEG-FORMATS(1)

NAME ffmpeg-formats - FFmpeg formats
DESCRIPTION This document describes the supported formats (muxers and demuxers) provided by the libavformat library.
FORMAT OPTIONS The libavformat library provides some generic global options, which can be set on all the muxers and demuxers. In addition each muxer or demuxer may support so-called private options, which are specific for that component.
Options may be set by specifying -option value in the FFmpeg tools, or by setting the value explicitly in the "AVFormatContext" options or using the libavutil/opt.h API for programmatic use.
The list of supported options follows:
avioflags flags (input/output) Possible values:
direct Reduce buffering.
probesize integer (input) Set probing size in bytes, i.e. the size of the data to analyze to get stream information. A higher value will enable detecting more information in case it is dispersed into the stream, but will increase latency. Must be an integer not lesser than 32. It is 5000000 by default.
max_probe_packets integer (input) Set the maximum number of buffered packets when probing a codec. Default is 2500 packets.
packetsize integer (output) Set packet size.
fflags flags Set format flags. Some are implemented for a limited number of formats.
Possible values for input files:
discardcorrupt Discard corrupted packets.
fastseek Enable fast, but inaccurate seeks for some formats.
genpts Generate missing PTS if DTS is present.
igndts Ignore DTS if PTS is set. Inert when nofillin is set.
nofillin Do not fill in missing values in packet fields that can be exactly calculated.
noparse Disable AVParsers, this needs "+nofillin" too.
sortdts Try to interleave output packets by DTS. At present, available only for AVIs with an index.
Possible values for output files:
autobsf Automatically apply bitstream filters as required by the output format. Enabled by default.
bitexact Only write platform-, build- and time-independent data. This ensures that file and data checksums are reproducible and match between platforms. Its primary use is for regression testing.
flush_packets Write out packets immediately.
shortest Stop muxing at the end of the shortest stream. It may be needed to increase max_interleave_delta to avoid flushing the longer streams before EOF.
seek2any integer (input) Allow seeking to non-keyframes on demuxer level when supported if set to 1. Default is 0.
analyzeduration integer (input) Specify how many microseconds are analyzed to probe the input. A higher value will enable detecting more accurate information, but will increase latency. It defaults to 5,000,000 microseconds = 5 seconds.
cryptokey hexadecimal string (input) Set decryption key.
indexmem integer (input) Set max memory used for timestamp index (per stream).
rtbufsize integer (input) Set max memory used for buffering real-time frames.
fdebug flags (input/output) Print specific debug info.
Possible values:
ts max_delay integer (input/output) Set maximum muxing or demuxing delay in microseconds.
chunk_duration integer (output) Set microseconds for each chunk.
chunk_size integer (output) Set size in bytes for each chunk.
err_detect, f_err_detect flags (input) Set error detection flags. "f_err_detect" is deprecated and should be used only via the ffmpeg tool.
Possible values:
crccheck Verify embedded CRCs.
bitstream Detect bitstream specification deviations.
buffer Detect improper bitstream length.
explode Abort decoding on minor error detection.
careful Consider things that violate the spec and have not been seen in the wild as errors.
compliant Consider all spec non compliancies as errors.
aggressive Consider things that a sane encoder should not do as an error.
max_interleave_delta integer (output) Set maximum buffering duration for interleaving. The duration is expressed in microseconds, and defaults to 10000000 (10 seconds).
To ensure all the streams are interleaved correctly, libavformat will wait until it has at least one packet for each stream before actually writing any packets to the output file. When some streams are "sparse" (i.e. there are large gaps between successive packets), this can result in excessive buffering.
This field specifies the maximum difference between the timestamps of the first and the last packet in the muxing queue, above which libavformat will output a packet regardless of whether it has queued a packet for all the streams.
If set to 0, libavformat will continue buffering packets until it has a packet for each stream, regardless of the maximum timestamp difference between the buffered packets.
use_wallclock_as_timestamps integer (input) Use wallclock as timestamps if set to 1. Default is 0.
avoid_negative_ts integer (output) Possible values:

auto (default) Enables shifting when required by the target format.
disabled Disables shifting of timestamp.
When shifting is enabled, all output timestamps are shifted by the same amount. Audio, video, and subtitles desynching and relative timestamp differences are preserved compared to how they would have been without shifting.
skip_initial_bytes integer (input) Set number of bytes to skip before reading header and frames if set to 1. Default is 0.
correct_ts_overflow integer (input) Correct single timestamp overflows if set to 1. Default is 1.
flush_packets integer (output) Flush the underlying I/O stream after each packet. Default is -1 (auto), which means that the underlying protocol will decide, 1 enables it, and has the effect of reducing the latency, 0 disables it and may increase IO throughput in some cases.
output_ts_offset offset (output) Set the output time offset.
offset must be a time duration specification, see the Time duration section in the ffmpeg-utils(1) manual.
The offset is added by the muxer to the output timestamps.
Specifying a positive offset means that the corresponding streams are delayed bt the time duration specified in offset. Default value is 0 (meaning that no offset is applied).
format_whitelist list (input) "," separated list of allowed demuxers. By default all are allowed.
dump_separator string (input) Separator used to separate the fields printed on the command line about the Stream parameters. For example, to separate the fields with newlines and indentation:
ffprobe -dump_separator " " -i ~/videos/matrixbench_mpeg2.mpg
max_streams integer (input) Specifies the maximum number of streams. This can be used to reject files that would require too many resources due to a large number of streams.
skip_estimate_duration_from_pts bool (input) Skip estimation of input duration when calculated using PTS. At present, applicable for MPEG-PS and MPEG-TS.
strict, f_strict integer (input/output) Specify how strictly to follow the standards. "f_strict" is
strict strictly conform to all the things in the spec no matter what consequences
normal unofficial allow unofficial extensions
experimental allow non standardized experimental things, experimental (unfinished/work in progress/not well tested) decoders and encoders. Note: experimental decoders can pose a security risk, do not use this for decoding untrusted input.
Format stream specifiers Format stream specifiers allow selection of one or more streams that match specific properties.
The exact semantics of stream specifiers is defined by the "avformat_match_stream_specifier()" function declared in the libavformat/avformat.h header and documented in the Stream specifiers section in the ffmpeg(1) manual.
DEMUXERS Demuxers are configured elements in FFmpeg that can read the multimedia streams from a particular type of file.
When you configure your FFmpeg build, all the supported demuxers are enabled by default. You can list all available ones using the configure option "--list-demuxers".
You can disable all the demuxers using the configure option "--disable-demuxers", and selectively enable a single demuxer with the option "--enable-demuxer=DEMUXER", or disable it with the option "--disable-demuxer=DEMUXER".
The option "-demuxers" of the ff* tools will display the list of enabled demuxers. Use "-formats" to view a combined list of enabled demuxers and muxers.
The description of some of the currently available demuxers follows.
aa Audible Format 2, 3, and 4 demuxer.
This demuxer is used to demux Audible Format 2, 3, and 4 (.aa) files.
aac Raw Audio Data Transport Stream AAC demuxer.
This demuxer is used to demux an ADTS input containing a single AAC stream alongwith any ID3v1/2 or APE tags in it.
apng Animated Portable Network Graphics demuxer.
This demuxer is used to demux APNG files. All headers, but the PNG signature, up to (but not including) the first fcTL chunk are Maximum framerate in frames per second. Default of 0 imposes no limit.
-default_fps int Default framerate in frames per second when none is specified in the file (0 meaning as fast as possible). Default is 15.
asf Advanced Systems Format demuxer.
This demuxer is used to demux ASF files and MMS network streams.
-no_resync_search bool Do not try to resynchronize by looking for a certain optional start code.
concat Virtual concatenation script demuxer.
This demuxer reads a list of files and other directives from a text file and demuxes them one after the other, as if all their packets had been muxed together.
The timestamps in the files are adjusted so that the first file starts at 0 and each next file starts where the previous one finishes. Note that it is done globally and may cause gaps if all streams do not have exactly the same length.
All files must have the same streams (same codecs, same time base, etc.).
The duration of each file is used to adjust the timestamps of the next file: if the duration is incorrect (because it was computed using the bit-rate or because the file is truncated, for example), it can cause artifacts. The "duration" directive can be used to override the duration stored in each file.
Syntax
The script is a text file in extended-ASCII, with one directive per line. Empty lines, leading spaces and lines starting with '#' are ignored. The following directive is recognized:
"file path" Path to a file to read; special characters and spaces must be escaped with backslash or single quotes.
All subsequent file-related directives apply to that file.
"ffconcat version 1.0" Identify the script type and version.
To make FFmpeg recognize the format automatically, this directive must appear exactly as is (no extra space or byte-order-mark) on the very first line of the script.
"duration dur" Duration of the file. This information can be specified from the file; specifying it here may be more efficient or help if the seeks to the specified timestamp. Seeking is done so that all streams can be presented successfully at In point.
This directive works best with intra frame codecs, because for non- intra frame ones you will usually get extra packets before the actual In point and the decoded content will most likely contain frames before In point too.
For each file, packets before the file In point will have timestamps less than the calculated start timestamp of the file (negative in case of the first file), and the duration of the files (if not specified by the "duration" directive) will be reduced based on their specified In point.
Because of potential packets before the specified In point, packet timestamps may overlap between two concatenated files.
"outpoint timestamp" Out point of the file. When the demuxer reaches the specified decoding timestamp in any of the streams, it handles it as an end of file condition and skips the current and all the remaining packets from all streams.
Out point is exclusive, which means that the demuxer will not output packets with a decoding timestamp greater or equal to Out point.
This directive works best with intra frame codecs and formats where all streams are tightly interleaved. For non-intra frame codecs you will usually get additional packets with presentation timestamp after Out point therefore the decoded content will most likely contain frames after Out point too. If your streams are not tightly interleaved you may not get all the packets from all streams before Out point and you may only will be able to decode the earliest stream until Out point.
The duration of the files (if not specified by the "duration" directive) will be reduced based on their specified Out point.
"file_packet_metadata key=value" Metadata of the packets of the file. The specified metadata will be set for each file packet. You can specify this directive multiple times to add multiple metadata entries. This directive is deprecated, use "file_packet_meta" instead.
"file_packet_meta key value" Metadata of the packets of the file. The specified metadata will be set for each file packet. You can specify this directive multiple times to add multiple metadata entries.
"option key value" Option to access, open and probe the file. Can be present multiple times.
"stream" Introduce a stream in the virtual file. All subsequent stream- related directives apply to the last introduced stream. Some streams properties must be set in order to allow identifying the matching streams in the subfiles. If no streams are defined in the
"stream_meta key value" Metadata for the stream. Can be present multiple times.
"stream_codec value" Codec for the stream.
"stream_extradata hex_string" Extradata for the string, encoded in hexadecimal.
"chapter id start end" Add a chapter. id is an unique identifier, possibly small and consecutive.
Options
This demuxer accepts the following option:
safe If set to 1, reject unsafe file paths and directives. A file path is considered safe if it does not contain a protocol specification and is relative and all components only contain characters from the portable character set (letters, digits, period, underscore and hyphen) and have no period at the beginning of a component.
If set to 0, any file name is accepted.
The default is 1.
auto_convert If set to 1, try to perform automatic conversions on packet data to make the streams concatenable. The default is 1.
Currently, the only conversion is adding the h264_mp4toannexb bitstream filter to H.264 streams in MP4 format. This is necessary in particular if there are resolution changes.
segment_time_metadata If set to 1, every packet will contain the lavf.concat.start_time and the lavf.concat.duration packet metadata values which are the start_time and the duration of the respective file segments in the concatenated output expressed in microseconds. The duration metadata is only set if it is known based on the concat file. The default is 0.
Examples
o Use absolute filenames and include some comments:
# my first filename file /mnt/share/file-1.wav # my second filename including whitespace file '/mnt/share/file 2.wav' # my third filename including whitespace plus single quote file '/mnt/share/file 3'\''.wav'
o Allow for input format auto-probing, use safe filenames and set the duration of the first file:
dash Dynamic Adaptive Streaming over HTTP demuxer.
This demuxer presents all AVStreams found in the manifest. By setting the discard flags on AVStreams the caller can decide which streams to actually receive. Each stream mirrors the "id" and "bandwidth" properties from the "<Representation>" as metadata keys named "id" and "variant_bitrate" respectively.
Options
This demuxer accepts the following option:
cenc_decryption_key 16-byte key, in hex, to decrypt files encrypted using ISO Common Encryption (CENC/AES-128 CTR; ISO/IEC 23001-7).
ea Electronic Arts Multimedia format demuxer.
This format is used by various Electronic Arts games.
Options
merge_alpha bool Normally the VP6 alpha channel (if exists) is returned as a secondary video stream, by setting this option you can make the demuxer return a single video stream which contains the alpha channel in addition to the ordinary video.
imf Interoperable Master Format demuxer.
This demuxer presents audio and video streams found in an IMF Composition.
flv, live_flv, kux Adobe Flash Video Format demuxer.
This demuxer is used to demux FLV files and RTMP network streams. In case of live network streams, if you force format, you may use live_flv option instead of flv to survive timestamp discontinuities. KUX is a flv variant used on the Youku platform.
ffmpeg -f flv -i myfile.flv ... ffmpeg -f live_flv -i rtmp://<any.server>/anything/key ....
-flv_metadata bool Allocate the streams according to the onMetaData array content.
-flv_ignore_prevtag bool Ignore the size of previous tag value.
-flv_full_metadata bool Output all context of the onMetadata.
gif Animated GIF demuxer.
Set the maximum valid delay between frames in hundredth of seconds. Range is 0 to 65535. Default value is 65535 (nearly eleven minutes), the maximum value allowed by the specification.
default_delay Set the default delay between frames in hundredths of seconds. Range is 0 to 6000. Default value is 10.
ignore_loop GIF files can contain information to loop a certain number of times (or infinitely). If ignore_loop is set to 1, then the loop setting from the input will be ignored and looping will not occur. If set to 0, then looping will occur and will cycle the number of times according to the GIF. Default value is 1.
For example, with the overlay filter, place an infinitely looping GIF over another video:
ffmpeg -i input.mp4 -ignore_loop 0 -i input.gif -filter_complex overlay=shortest=1 out.mkv
Note that in the above example the shortest option for overlay filter is used to end the output video at the length of the shortest input file, which in this case is input.mp4 as the GIF in this example loops infinitely.
hls HLS demuxer
Apple HTTP Live Streaming demuxer.
This demuxer presents all AVStreams from all variant streams. The id field is set to the bitrate variant index number. By setting the discard flags on AVStreams (by pressing 'a' or 'v' in ffplay), the caller can decide which variant streams to actually receive. The total bitrate of the variant that the stream belongs to is available in a metadata key named "variant_bitrate".
It accepts the following options:
live_start_index segment index to start live streams at (negative values are from the end).
prefer_x_start prefer to use #EXT-X-START if it's in playlist instead of live_start_index.
allowed_extensions ',' separated list of file extensions that hls is allowed to access.
max_reload Maximum number of times a insufficient list is attempted to be reloaded. Default value is 1000.
m3u8_hold_counters The maximum number of times to load m3u8 when it refreshes without new segments. Default value is 1000.

http_seekable Use HTTP partial requests for downloading HTTP segments. 0 = disable, 1 = enable, -1 = auto, Default is auto.
seg_format_options Set options for the demuxer of media segments using a list of key=value pairs separated by ":".
seg_max_retry Maximum number of times to reload a segment on error, useful when segment skip on network error is not desired. Default value is 0.
image2 Image file demuxer.
This demuxer reads from a list of image files specified by a pattern. The syntax and meaning of the pattern is specified by the option pattern_type.
The pattern may contain a suffix which is used to automatically determine the format of the images contained in the files.
The size, the pixel format, and the format of each image must be the same for all the files in the sequence.
This demuxer accepts the following options:
framerate Set the frame rate for the video stream. It defaults to 25.
loop If set to 1, loop over the input. Default value is 0.
pattern_type Select the pattern type used to interpret the provided filename.
pattern_type accepts one of the following values.
none Disable pattern matching, therefore the video will only contain the specified image. You should use this option if you do not want to create sequences from multiple images and your filenames may contain special pattern characters.
sequence Select a sequence pattern type, used to specify a sequence of files indexed by sequential numbers.
A sequence pattern may contain the string "%d" or "%0Nd", which specifies the position of the characters representing a sequential number in each filename matched by the pattern. If the form "%d0Nd" is used, the string representing the number in each filename is 0-padded and N is the total number of 0-padded digits representing the number. The literal character '%' can be specified in the pattern with the string "%%".
If the sequence pattern contains "%d" or "%0Nd", the first filename of the file list specified by the pattern must contain sequence of filenames of the form i%m%g-1.jpg, i%m%g-2.jpg, ..., i%m%g-10.jpg, etc.
Note that the pattern must not necessarily contain "%d" or "%0Nd", for example to convert a single image file img.jpeg you can employ the command:
ffmpeg -i img.jpeg img.png
glob Select a glob wildcard pattern type.
The pattern is interpreted like a "glob()" pattern. This is only selectable if libavformat was compiled with globbing support.
glob_sequence (deprecated, will be removed) Select a mixed glob wildcard/sequence pattern.
If your version of libavformat was compiled with globbing support, and the provided pattern contains at least one glob meta character among "%*?[]{}" that is preceded by an unescaped "%", the pattern is interpreted like a "glob()" pattern, otherwise it is interpreted like a sequence pattern.
All glob special characters "%*?[]{}" must be prefixed with "%". To escape a literal "%" you shall use "%%".
For example the pattern "foo-%*.jpeg" will match all the filenames prefixed by "foo-" and terminating with ".jpeg", and "foo-%?%?%?.jpeg" will match all the filenames prefixed with "foo-", followed by a sequence of three characters, and terminating with ".jpeg".
This pattern type is deprecated in favor of glob and sequence.
Default value is glob_sequence.
pixel_format Set the pixel format of the images to read. If not specified the pixel format is guessed from the first image file in the sequence.
start_number Set the index of the file matched by the image file pattern to start to read from. Default value is 0.
start_number_range Set the index interval range to check when looking for the first image file in the sequence, starting from start_number. Default value is 5.
ts_from_file If set to 1, will set frame timestamp to modification time of image file. Note that monotonity of timestamps is not provided: images go in the same order as without this option. Default value is 0. If set to 2, will set frame timestamp to the modification time of the image file in nanosecond precision.
video_size described below:
lavf.image2dec.source_path Corresponds to the full path to the input file being read.
lavf.image2dec.source_basename Corresponds to the name of the file being read.
Examples
o Use ffmpeg for creating a video from the images in the file sequence img-001.jpeg, img-002.jpeg, ..., assuming an input frame rate of 10 frames per second:
ffmpeg -framerate 10 -i 'img-%03d.jpeg' out.mkv
o As above, but start by reading from a file with index 100 in the sequence:
ffmpeg -framerate 10 -start_number 100 -i 'img-%03d.jpeg' out.mkv
o Read images matching the "*.png" glob pattern , that is all the files terminating with the ".png" suffix:
ffmpeg -framerate 10 -pattern_type glob -i "*.png" out.mkv
libgme The Game Music Emu library is a collection of video game music file emulators.
See <https://bitbucket.org/mpyne/game-music-emu/overview> for more information.
It accepts the following options:
track_index Set the index of which track to demux. The demuxer can only export one track. Track indexes start at 0. Default is to pick the first track. Number of tracks is exported as tracks metadata entry.
sample_rate Set the sampling rate of the exported track. Range is 1000 to 999999. Default is 44100.
max_size (bytes) The demuxer buffers the entire file into memory. Adjust this value to set the maximum buffer size, which in turn, acts as a ceiling for the size of files that can be read. Default is 50 MiB.
libmodplug ModPlug based module demuxer
See <https://github.com/Konstanty/libmodplug>
It will export one 2-channel 16-bit 44.1 kHz audio stream. Optionally, a "pal8" 16-color video stream can be exported with or without printed metadata.
It accepts the following options:
reverb_delay Set delay in ms, clamped to 40-250 ms. Default is 0.
bass_amount Apply bass expansion a.k.a. XBass or megabass. Range is 0 (quiet) to 100 (loud). Default is 0.
bass_range Set cutoff i.e. upper-bound for bass frequencies. Range is 10-100 Hz. Default is 0.
surround_depth Apply a Dolby Pro-Logic surround effect. Range is 0 (quiet) to 100 (heavy). Default is 0.
surround_delay Set surround delay in ms, clamped to 5-40 ms. Default is 0.
max_size The demuxer buffers the entire file into memory. Adjust this value to set the maximum buffer size, which in turn, acts as a ceiling for the size of files that can be read. Range is 0 to 100 MiB. 0 removes buffer size limit (not recommended). Default is 5 MiB.
video_stream_expr String which is evaluated using the eval API to assign colors to the generated video stream. Variables which can be used are "x", "y", "w", "h", "t", "speed", "tempo", "order", "pattern" and "row".
video_stream Generate video stream. Can be 1 (on) or 0 (off). Default is 0.
video_stream_w Set video frame width in 'chars' where one char indicates 8 pixels. Range is 20-512. Default is 30.
video_stream_h Set video frame height in 'chars' where one char indicates 8 pixels. Range is 20-512. Default is 30.
video_stream_ptxt Print metadata on video stream. Includes "speed", "tempo", "order", "pattern", "row" and "ts" (time in ms). Can be 1 (on) or 0 (off). Default is 1.
libopenmpt libopenmpt based module demuxer
See <https://lib.openmpt.org/libopenmpt/> for more information.
Some files have multiple subsongs (tracks) this can be set with the subsong option.
It accepts the following options:
subsong Set the subsong index. This can be either 'all', 'auto', or the index of the subsong. Subsong indexes start at 0. The default is
sample_rate Set the sample rate for libopenmpt to output. Range is from 1000 to INT_MAX. The value default is 48000.
mov/mp4/3gp Demuxer for Quicktime File Format & ISO/IEC Base Media File Format (ISO/IEC 14496-12 or MPEG-4 Part 12, ISO/IEC 15444-12 or JPEG 2000 Part 12).
Registered extensions: mov, mp4, m4a, 3gp, 3g2, mj2, psp, m4b, ism, ismv, isma, f4v
Options
This demuxer accepts the following options:
enable_drefs Enable loading of external tracks, disabled by default. Enabling this can theoretically leak information in some use cases.
use_absolute_path Allows loading of external tracks via absolute paths, disabled by default. Enabling this poses a security risk. It should only be enabled if the source is known to be non-malicious.
seek_streams_individually When seeking, identify the closest point in each stream individually and demux packets in that stream from identified point. This can lead to a different sequence of packets compared to demuxing linearly from the beginning. Default is true.
ignore_editlist Ignore any edit list atoms. The demuxer, by default, modifies the stream index to reflect the timeline described by the edit list. Default is false.
advanced_editlist Modify the stream index to reflect the timeline described by the edit list. "ignore_editlist" must be set to false for this option to be effective. If both "ignore_editlist" and this option are set to false, then only the start of the stream index is modified to reflect initial dwell time or starting timestamp described by the edit list. Default is true.
ignore_chapters Don't parse chapters. This includes GoPro 'HiLight' tags/moments. Note that chapters are only parsed when input is seekable. Default is false.
use_mfra_for For seekable fragmented input, set fragment's starting timestamp from media fragment random access box, if present.
Following options are available:
auto Auto-detect whether to set mfra timestamps as PTS or DTS (default)
use_tfdt For fragmented input, set fragment's starting timestamp to "baseMediaDecodeTime" from the "tfdt" box. Default is enabled, which will prefer to use the "tfdt" box to set DTS. Disable to use the "earliest_presentation_time" from the "sidx" box. In either case, the timestamp from the "mfra" box will be used if it's available and "use_mfra_for" is set to pts or dts.
export_all Export unrecognized boxes within the udta box as metadata entries. The first four characters of the box type are set as the key. Default is false.
export_xmp Export entire contents of XMP_ box and uuid box as a string with key "xmp". Note that if "export_all" is set and this option isn't, the contents of XMP_ box are still exported but with key "XMP_". Default is false.
activation_bytes 4-byte key required to decrypt Audible AAX and AAX+ files. See Audible AAX subsection below.
audible_fixed_key Fixed key used for handling Audible AAX/AAX+ files. It has been pre-set so should not be necessary to specify.
decryption_key 16-byte key, in hex, to decrypt files encrypted using ISO Common Encryption (CENC/AES-128 CTR; ISO/IEC 23001-7).
max_stts_delta Very high sample deltas written in a trak's stts box may occasionally be intended but usually they are written in error or used to store a negative value for dts correction when treated as signed 32-bit integers. This option lets the user set an upper limit, beyond which the delta is clamped to 1. Values greater than the limit if negative when cast to int32 are used to adjust onward dts.
Unit is the track time scale. Range is 0 to UINT_MAX. Default is "UINT_MAX - 48000*10" which allows upto a 10 second dts correction for 48 kHz audio streams while accommodating 99.9% of "uint32" range.
Audible AAX
Audible AAX files are encrypted M4B files, and they can be decrypted by specifying a 4 byte activation secret.
ffmpeg -activation_bytes 1CEB00DA -i test.aax -vn -c:a copy output.mp4
mpegts MPEG-2 transport stream demuxer.
This demuxer accepts the following options:
resync_size Set size limit for looking up a new synchronization. Default value calculated from the PCR of the first program which the teletext stream is part of and is not discarded. Default value is 1, set this option to 0 if you want your teletext packet PTS and DTS values untouched.
ts_packetsize Output option carrying the raw packet size in bytes. Show the detected raw packet size, cannot be set by the user.
scan_all_pmts Scan and combine all PMTs. The value is an integer with value from -1 to 1 (-1 means automatic setting, 1 means enabled, 0 means disabled). Default value is -1.
merge_pmt_versions Re-use existing streams when a PMT's version is updated and elementary streams move to different PIDs. Default value is 0.
max_packet_size Set maximum size, in bytes, of packet emitted by the demuxer. Payloads above this size are split across multiple packets. Range is 1 to INT_MAX/2. Default is 204800 bytes.
mpjpeg MJPEG encapsulated in multi-part MIME demuxer.
This demuxer allows reading of MJPEG, where each frame is represented as a part of multipart/x-mixed-replace stream.
strict_mime_boundary Default implementation applies a relaxed standard to multi-part MIME boundary detection, to prevent regression with numerous existing endpoints not generating a proper MIME MJPEG stream. Turning this option on by setting it to 1 will result in a stricter check of the boundary value.
rawvideo Raw video demuxer.
This demuxer allows one to read raw video data. Since there is no header specifying the assumed video parameters, the user must specify them in order to be able to decode the data correctly.
This demuxer accepts the following options:
framerate Set input video frame rate. Default value is 25.
pixel_format Set the input video pixel format. Default value is "yuv420p".
video_size Set the input video size. This value must be specified explicitly.
For example to read a rawvideo file input.raw with ffplay, assuming a pixel format of "rgb24", a video size of "320x240", and a frame rate of 10 images per second, use the command:
ffplay -f rawvideo -pixel_format rgb24 -video_size 320x240 -framerate 10 input.raw
-SE a: 300-2.5/3 440+4.5/0 b: 300-2.5/0 440+4.5/3 off: - NOW == a +0:07:00 == b +0:14:00 == a +0:21:00 == b +0:30:00 off
A SBG script can mix absolute and relative timestamps. If the script uses either only absolute timestamps (including the script start time) or only relative ones, then its layout is fixed, and the conversion is straightforward. On the other hand, if the script mixes both kind of timestamps, then the NOW reference for relative timestamps will be taken from the current time of day at the time the script is read, and the script layout will be frozen according to that reference. That means that if the script is directly played, the actual times will match the absolute timestamps up to the sound controller's clock accuracy, but if the user somehow pauses the playback or seeks, all times will be shifted accordingly.
tedcaptions JSON captions used for <http://www.ted.com/>.
TED does not provide links to the captions, but they can be guessed from the page. The file tools/bookmarklets.html from the FFmpeg source tree contains a bookmarklet to expose them.
This demuxer accepts the following option:
start_time Set the start time of the TED talk, in milliseconds. The default is 15000 (15s). It is used to sync the captions with the downloadable videos, because they include a 15s intro.
Example: convert the captions to a format most players understand:
ffmpeg -i http://www.ted.com/talks/subtitles/id/1/lang/en talk1-en.srt
vapoursynth Vapoursynth wrapper.
Due to security concerns, Vapoursynth scripts will not be autodetected so the input format has to be forced. For ff* CLI tools, add "-f vapoursynth" before the input "-i yourscript.vpy".
This demuxer accepts the following option:
max_script_size The demuxer buffers the entire script into memory. Adjust this value to set the maximum buffer size, which in turn, acts as a ceiling for the size of scripts that can be read. Default is 1 MiB.
MUXERS Muxers are configured elements in FFmpeg which allow writing multimedia streams to a particular type of file. the options "--enable-muxer=MUXER" / "--disable-muxer=MUXER".
The option "-muxers" of the ff* tools will display the list of enabled muxers. Use "-formats" to view a combined list of enabled demuxers and muxers.
A description of some of the currently available muxers follows.
a64 A64 muxer for Commodore 64 video. Accepts a single "a64_multi" or "a64_multi5" codec video stream.
adts Audio Data Transport Stream muxer. It accepts a single AAC stream.
Options
It accepts the following options:
write_id3v2 bool Enable to write ID3v2.4 tags at the start of the stream. Default is disabled.
write_apetag bool Enable to write APE tags at the end of the stream. Default is disabled.
write_mpeg2 bool Enable to set MPEG version bit in the ADTS frame header to 1 which indicates MPEG-2. Default is 0, which indicates MPEG-4.
aiff Audio Interchange File Format muxer.
Options
It accepts the following options:
write_id3v2 Enable ID3v2 tags writing when set to 1. Default is 0 (disabled).
id3v2_version Select ID3v2 version to write. Currently only version 3 and 4 (aka. ID3v2.3 and ID3v2.4) are supported. The default is version 4.
alp Muxer for audio of High Voltage Software's Lego Racers game. It accepts a single ADPCM_IMA_ALP stream with no more than 2 channels nor a sample rate greater than 44100 Hz.
Extensions: tun, pcm
Options
It accepts the following options:
type type Set file type.

asf Advanced Systems Format muxer.
Note that Windows Media Audio (wma) and Windows Media Video (wmv) use this muxer too.
Options
It accepts the following options:
packet_size Set the muxer packet size. By tuning this setting you may reduce data fragmentation or muxer overhead depending on your source. Default value is 3200, minimum is 100, maximum is 64k.
avi Audio Video Interleaved muxer.
Options
It accepts the following options:
reserve_index_space Reserve the specified amount of bytes for the OpenDML master index of each stream within the file header. By default additional master indexes are embedded within the data packets if there is no space left in the first master index and are linked together as a chain of indexes. This index structure can cause problems for some use cases, e.g. third-party software strictly relying on the OpenDML index specification or when file seeking is slow. Reserving enough index space in the file header avoids these problems.
The required index space depends on the output file size and should be about 16 bytes per gigabyte. When this option is omitted or set to zero the necessary index space is guessed.
write_channel_mask Write the channel layout mask into the audio stream header.
This option is enabled by default. Disabling the channel mask can be useful in specific scenarios, e.g. when merging multiple audio streams into one for compatibility with software that only supports a single audio stream in AVI (see the "amerge" section in the ffmpeg-filters manual).
flipped_raw_rgb If set to true, store positive height for raw RGB bitmaps, which indicates bitmap is stored bottom-up. Note that this option does not flip the bitmap which has to be done manually beforehand, e.g. by using the vflip filter. Default is false and indicates bitmap is stored top down.
chromaprint Chromaprint fingerprinter.
This muxer feeds audio data to the Chromaprint library, which generates a fingerprint for the provided audio data. See <https://acoustid.org/chromaprint> Threshold for detecting silence. Range is from -1 to 32767, where -1 disables silence detection. Silence detection can only be used with version 3 of the algorithm. Silence detection must be disabled for use with the AcoustID service. Default is -1.
algorithm Version of algorithm to fingerprint with. Range is 0 to 4. Version 3 enables silence detection. Default is 1.
fp_format Format to output the fingerprint as. Accepts the following options:
raw Binary raw fingerprint
compressed Binary compressed fingerprint
base64 Base64 compressed fingerprint (default)
crc CRC (Cyclic Redundancy Check) testing format.
This muxer computes and prints the Adler-32 CRC of all the input audio and video frames. By default audio frames are converted to signed 16-bit raw audio and video frames to raw video before computing the CRC.
The output of the muxer consists of a single line of the form: CRC=0xCRC, where CRC is a hexadecimal number 0-padded to 8 digits containing the CRC for all the decoded input frames.
See also the framecrc muxer.
Examples
For example to compute the CRC of the input, and store it in the file out.crc:
ffmpeg -i INPUT -f crc out.crc
You can print the CRC to stdout with the command:
ffmpeg -i INPUT -f crc -
You can select the output format of each frame with ffmpeg by specifying the audio and video codec and format. For example to compute the CRC of the input audio converted to PCM unsigned 8-bit and the input video converted to MPEG-2 video, use the command:
ffmpeg -i INPUT -c:a pcm_u8 -c:v mpeg2video -f crc -
dash Dynamic Adaptive Streaming over HTTP (DASH) muxer that creates segments and manifest files according to the MPEG-DASH standard ISO/IEC 23009-1:2014.
For more information see:

The segment filename might contain pre-defined identifiers used with SegmentTemplate as defined in section 5.3.9.4.4 of the standard. Available identifiers are "$RepresentationID$", "$Number$", "$Bandwidth$" and "$Time$". In addition to the standard identifiers, an ffmpeg-specific "$ext$" identifier is also supported. When specified ffmpeg will replace $ext$ in the file name with muxing format's extensions such as mp4, webm etc.,
ffmpeg -re -i <input> -map 0 -map 0 -c:a libfdk_aac -c:v libx264 \ -b:v:0 800k -b:v:1 300k -s:v:1 320x170 -profile:v:1 baseline \ -profile:v:0 main -bf 1 -keyint_min 120 -g 120 -sc_threshold 0 \ -b_strategy 0 -ar:a:1 22050 -use_timeline 1 -use_template 1 \ -window_size 5 -adaptation_sets "id=0,streams=v id=1,streams=a" \ -f dash /path/to/out.mpd
seg_duration duration Set the segment length in seconds (fractional value can be set). The value is treated as average segment duration when use_template is enabled and use_timeline is disabled and as minimum segment duration for all the other use cases.
frag_duration duration Set the length in seconds of fragments within segments (fractional value can be set).
frag_type type Set the type of interval for fragmentation.
window_size size Set the maximum number of segments kept in the manifest.
extra_window_size size Set the maximum number of segments kept outside of the manifest before removing from disk.
remove_at_exit remove Enable (1) or disable (0) removal of all segments when finished.
use_template template Enable (1) or disable (0) use of SegmentTemplate instead of SegmentList.
use_timeline timeline Enable (1) or disable (0) use of SegmentTimeline in SegmentTemplate.
single_file single_file Enable (1) or disable (0) storing all segments in one file, accessed using byte ranges.
single_file_name file_name DASH-templated name to be used for baseURL. Implies single_file set to "1". In the template, "$ext$" is replaced with the file name extension specific for the segment format.
init_seg_name init_name DASH-templated name to used for the initialization segment. Default is "init-stream$RepresentationID$.$ext$". "$ext$" is replaced with
utc_timing_url utc_url URL of the page that will return the UTC timestamp in ISO format. Example: "https://time.akamai.com/?iso"
method method Use the given HTTP method to create output files. Generally set to PUT or POST.
http_user_agent user_agent Override User-Agent field in HTTP header. Applicable only for HTTP output.
http_persistent http_persistent Use persistent HTTP connections. Applicable only for HTTP output.
hls_playlist hls_playlist Generate HLS playlist files as well. The master playlist is generated with the filename hls_master_name. One media playlist file is generated for each stream with filenames media_0.m3u8, media_1.m3u8, etc.
hls_master_name file_name HLS master playlist name. Default is "master.m3u8".
streaming streaming Enable (1) or disable (0) chunk streaming mode of output. In chunk streaming mode, each frame will be a moof fragment which forms a chunk.
adaptation_sets adaptation_sets Assign streams to AdaptationSets. Syntax is "id=x,streams=a,b,c id=y,streams=d,e" with x and y being the IDs of the adaptation sets and a,b,c,d and e are the indices of the mapped streams.
To map all video (or audio) streams to an AdaptationSet, "v" (or "a") can be used as stream identifier instead of IDs.
When no assignment is defined, this defaults to an AdaptationSet for each stream.
Optional syntax is "id=x,seg_duration=x,frag_duration=x,frag_type=type,descriptor=descriptor_string,streams=a,b,c id=y,seg_duration=y,frag_type=type,streams=d,e" and so on, descriptor is useful to the scheme defined by ISO/IEC 23009-1:2014/Amd.2:2015. For example, -adaptation_sets "id=0,descriptor=<SupplementalProperty schemeIdUri=\"urn:mpeg:dash:srd:2014\" value=\"0,0,0,1,1,2,2\"/>,streams=v". Please note that descriptor string should be a self-closing xml tag. seg_duration, frag_duration and frag_type override the global option values for each adaptation set. For example, -adaptation_sets "id=0,seg_duration=2,frag_duration=1,frag_type=duration,streams=v id=1,seg_duration=2,frag_type=none,streams=a" type_id marks an adaptation set as containing streams meant to be used for Trick Mode for the referenced adaptation set. For example, -adaptation_sets "id=0,seg_duration=2,frag_type=none,streams=0 id=1,seg_duration=10,frag_type=none,trick_id=0,streams=1"
disabled.
When enabled, the logic monitors the flow of segment indexes. If a streams's segment index value is not at the expected real time position, then the logic corrects that index value.
Typically this logic is needed in live streaming use cases. The network bandwidth fluctuations are common during long run streaming. Each fluctuation can cause the segment indexes fall behind the expected real time position.
format_options options_list Set container format (mp4/webm) options using a ":" separated list of key=value parameters. Values containing ":" special characters must be escaped.
global_sidx global_sidx Write global SIDX atom. Applicable only for single file, mp4 output, non-streaming mode.
dash_segment_type dash_segment_type Possible values:
auto If this flag is set, the dash segment files format will be selected based on the stream codec. This is the default mode.
mp4 If this flag is set, the dash segment files will be in in ISOBMFF format.
webm If this flag is set, the dash segment files will be in in WebM format.
ignore_io_errors ignore_io_errors Ignore IO errors during open and write. Useful for long-duration runs with network output.
lhls lhls Enable Low-latency HLS(LHLS). Adds #EXT-X-PREFETCH tag with current segment's URI. hls.js player folks are trying to standardize an open LHLS spec. The draft spec is available in https://github.com/video-dev/hlsjs-rfcs/blob/lhls-spec/proposals/0001-lhls.md This option tries to comply with the above open spec. It enables streaming and hls_playlist options automatically. This is an experimental feature.
Note: This is not Apple's version LHLS. See <https://datatracker.ietf.org/doc/html/draft-pantos-hls-rfc8216bis>
ldash ldash Enable Low-latency Dash by constraining the presence and values of some elements.
master_m3u8_publish_rate master_m3u8_publish_rate Publish master playlist repeatedly every after specified number of segment intervals.
write_prft write_prft Set one or more manifest profiles.
http_opts http_opts A :-separated list of key=value options to pass to the underlying HTTP protocol. Applicable only for HTTP output.
target_latency target_latency Set an intended target latency in seconds (fractional value can be set) for serving. Applicable only when streaming and write_prft options are enabled. This is an informative fields clients can use to measure the latency of the service.
min_playback_rate min_playback_rate Set the minimum playback rate indicated as appropriate for the purposes of automatically adjusting playback latency and buffer occupancy during normal playback by clients.
max_playback_rate max_playback_rate Set the maximum playback rate indicated as appropriate for the purposes of automatically adjusting playback latency and buffer occupancy during normal playback by clients.
update_period update_period Set the mpd update period ,for dynamic content. The unit is second.
fifo The fifo pseudo-muxer allows the separation of encoding and muxing by using first-in-first-out queue and running the actual muxer in a separate thread. This is especially useful in combination with the tee muxer and can be used to send data to several destinations with different reliability/writing speed/latency.
API users should be aware that callback functions (interrupt_callback, io_open and io_close) used within its AVFormatContext must be thread- safe.
The behavior of the fifo muxer if the queue fills up or if the output fails is selectable,
o output can be transparently restarted with configurable delay between retries based on real time or time of the processed stream.
o encoding can be blocked during temporary failure, or continue transparently dropping packets in case fifo queue fills up.
fifo_format Specify the format name. Useful if it cannot be guessed from the output name suffix.
queue_size Specify size of the queue (number of packets). Default value is 60.
format_opts Specify format options for the underlying muxer. Muxer options can be specified as a list of key=value pairs separated by ':'.
drop_pkts_on_overflow bool If set to 1 (true), in case the fifo queue fills up, packets will If failure occurs, attempt to recover the output. This is especially useful when used with network output, since it makes it possible to restart streaming transparently. By default this option is set to 0 (false).
max_recovery_attempts Sets maximum number of successive unsuccessful recovery attempts after which the output fails permanently. By default this option is set to 0 (unlimited).
recovery_wait_time duration Waiting time before the next recovery attempt after previous unsuccessful recovery attempt. Default value is 5 seconds.
recovery_wait_streamtime bool If set to 0 (false), the real time is used when waiting for the recovery attempt (i.e. the recovery will be attempted after at least recovery_wait_time seconds). If set to 1 (true), the time of the processed stream is taken into account instead (i.e. the recovery will be attempted after at least recovery_wait_time seconds of the stream is omitted). By default, this option is set to 0 (false).
recover_any_error bool If set to 1 (true), recovery will be attempted regardless of type of the error causing the failure. By default this option is set to 0 (false) and in case of certain (usually permanent) errors the recovery is not attempted even when attempt_recovery is set to 1.
restart_with_keyframe bool Specify whether to wait for the keyframe after recovering from queue overflow or failure. This option is set to 0 (false) by default.
timeshift duration Buffer the specified amount of packets and delay writing the output. Note that queue_size must be big enough to store the packets for timeshift. At the end of the input the fifo buffer is flushed at realtime speed.
Examples
o Stream something to rtmp server, continue processing the stream at real-time rate even in case of temporary failure (network outage) and attempt to recover streaming every second indefinitely.
ffmpeg -re -i ... -c:v libx264 -c:a aac -f fifo -fifo_format flv -map 0:v -map 0:a -drop_pkts_on_overflow 1 -attempt_recovery 1 -recovery_wait_time 1 rtmp://example.com/live/stream_name
flv Adobe Flash Video Format muxer.
This muxer accepts the following options:
flvflags flags Possible values:
aac_seq_header_detect Place AAC sequence header based on audio stream data.
no_duration_filesize Disable duration and filesize in metadata when they are equal to zero at the end of stream. (Be used to non-seekable living stream).
add_keyframe_index Used to facilitate seeking; particularly for HTTP pseudo streaming.
framecrc Per-packet CRC (Cyclic Redundancy Check) testing format.
This muxer computes and prints the Adler-32 CRC for each audio and video packet. By default audio frames are converted to signed 16-bit raw audio and video frames to raw video before computing the CRC.
The output of the muxer consists of a line for each audio and video packet of the form:
<stream_index>, <packet_dts>, <packet_pts>, <packet_duration>, <packet_size>, 0x<CRC>
CRC is a hexadecimal number 0-padded to 8 digits containing the CRC of the packet.
Examples
For example to compute the CRC of the audio and video frames in INPUT, converted to raw audio and video packets, and store it in the file out.crc:
ffmpeg -i INPUT -f framecrc out.crc
To print the information to stdout, use the command:
ffmpeg -i INPUT -f framecrc -
With ffmpeg, you can select the output format to which the audio and video frames are encoded before computing the CRC for each packet by specifying the audio and video codec. For example, to compute the CRC of each decoded input audio frame converted to PCM unsigned 8-bit and of each decoded input video frame converted to MPEG-2 video, use the command:
ffmpeg -i INPUT -c:a pcm_u8 -c:v mpeg2video -f framecrc -
See also the crc muxer.
framehash Per-packet hash testing format.
This muxer computes and prints a cryptographic hash for each audio and video packet. This can be used for packet-by-packet equality checks without having to individually do a binary comparison on each.
By default audio frames are converted to signed 16-bit raw audio and video frames to raw video before computing the hash, but the output of explicit conversions to other codecs can also be used. It uses the SHA-256 cryptographic hash function by default, but supports several other algorithms. packet.
hash algorithm Use the cryptographic hash function specified by the string algorithm. Supported values include "MD5", "murmur3", "RIPEMD128", "RIPEMD160", "RIPEMD256", "RIPEMD320", "SHA160", "SHA224", "SHA256" (default), "SHA512/224", "SHA512/256", "SHA384", "SHA512", "CRC32" and "adler32".
Examples
To compute the SHA-256 hash of the audio and video frames in INPUT, converted to raw audio and video packets, and store it in the file out.sha256:
ffmpeg -i INPUT -f framehash out.sha256
To print the information to stdout, using the MD5 hash function, use the command:
ffmpeg -i INPUT -f framehash -hash md5 -
See also the hash muxer.
framemd5 Per-packet MD5 testing format.
This is a variant of the framehash muxer. Unlike that muxer, it defaults to using the MD5 hash function.
Examples
To compute the MD5 hash of the audio and video frames in INPUT, converted to raw audio and video packets, and store it in the file out.md5:
ffmpeg -i INPUT -f framemd5 out.md5
To print the information to stdout, use the command:
ffmpeg -i INPUT -f framemd5 -
See also the framehash and md5 muxers.
gif Animated GIF muxer.
It accepts the following options:
loop Set the number of times to loop the output. Use "-1" for no loop, 0 for looping indefinitely (default).
final_delay Force the delay (expressed in centiseconds) after the last frame. Each frame ends with a delay until the next frame. The default is "-1", which is a special value to tell the muxer to re-use the previous delay. In case of a loop, you might want to customize this value to mark a pause for instance.
need to force the image2 muxer:
ffmpeg -i INPUT -c:v gif -f image2 "out%d.gif"
Note 2: the GIF format has a very large time base: the delay between two frames can therefore not be smaller than one centi second.
hash Hash testing format.
This muxer computes and prints a cryptographic hash of all the input audio and video frames. This can be used for equality checks without having to do a complete binary comparison.
By default audio frames are converted to signed 16-bit raw audio and video frames to raw video before computing the hash, but the output of explicit conversions to other codecs can also be used. Timestamps are ignored. It uses the SHA-256 cryptographic hash function by default, but supports several other algorithms.
The output of the muxer consists of a single line of the form: algo=hash, where algo is a short string representing the hash function used, and hash is a hexadecimal number representing the computed hash.
hash algorithm Use the cryptographic hash function specified by the string algorithm. Supported values include "MD5", "murmur3", "RIPEMD128", "RIPEMD160", "RIPEMD256", "RIPEMD320", "SHA160", "SHA224", "SHA256" (default), "SHA512/224", "SHA512/256", "SHA384", "SHA512", "CRC32" and "adler32".
Examples
To compute the SHA-256 hash of the input converted to raw audio and video, and store it in the file out.sha256:
ffmpeg -i INPUT -f hash out.sha256
To print an MD5 hash to stdout use the command:
ffmpeg -i INPUT -f hash -hash md5 -
See also the framehash muxer.
hls Apple HTTP Live Streaming muxer that segments MPEG-TS according to the HTTP Live Streaming (HLS) specification.
It creates a playlist file, and one or more segment files. The output filename specifies the playlist filename.
By default, the muxer creates a file for each segment produced. These files have the same name as the playlist, followed by a sequential number and a .ts extension.
Make sure to require a closed GOP when encoding and to set the GOP size to fit your segment time constraint.
For example, to convert an input file with ffmpeg: implementation of a segmenter, and can be used to perform HLS segmentation.
Options
This muxer supports the following options:
hls_init_time duration Set the initial target segment length. Default value is 0.
duration must be a time duration specification, see the Time duration section in the ffmpeg-utils(1) manual.
Segment will be cut on the next key frame after this time has passed on the first m3u8 list. After the initial playlist is filled ffmpeg will cut segments at duration equal to "hls_time"
hls_time duration Set the target segment length. Default value is 2.
duration must be a time duration specification, see the Time duration section in the ffmpeg-utils(1) manual. Segment will be cut on the next key frame after this time has passed.
hls_list_size size Set the maximum number of playlist entries. If set to 0 the list file will contain all the segments. Default value is 5.
hls_delete_threshold size Set the number of unreferenced segments to keep on disk before "hls_flags delete_segments" deletes them. Increase this to allow continue clients to download segments which were recently referenced in the playlist. Default value is 1, meaning segments older than "hls_list_size+1" will be deleted.
hls_start_number_source Start the playlist sequence number ("#EXT-X-MEDIA-SEQUENCE") according to the specified source. Unless "hls_flags single_file" is set, it also specifies source of starting sequence numbers of segment and subtitle filenames. In any case, if "hls_flags append_list" is set and read playlist sequence number is greater than the specified start sequence number, then that value will be used as start value.
It accepts the following values:
generic (default) Set the starting sequence numbers according to start_number option value.
epoch The start number will be the seconds since epoch (1970-01-01 00:00:00)
epoch_us The start number will be the microseconds since epoch (1970-01-01 00:00:00)
datetime it also specifies starting sequence numbers of segment and subtitle filenames. Default value is 0.
hls_allow_cache allowcache Explicitly set whether the client MAY (1) or MUST NOT (0) cache media segments.
hls_base_url baseurl Append baseurl to every entry in the playlist. Useful to generate playlists with absolute paths.
Note that the playlist sequence number must be unique for each segment and it is not to be confused with the segment filename sequence number which can be cyclic, for example if the wrap option is specified.
hls_segment_filename filename Set the segment filename. Unless "hls_flags single_file" is set, filename is used as a string format with the segment number:
ffmpeg -i in.nut -hls_segment_filename 'file%03d.ts' out.m3u8
This example will produce the playlist, out.m3u8, and segment files: file000.ts, file001.ts, file002.ts, etc.
filename may contain full path or relative path specification, but only the file name part without any path info will be contained in the m3u8 segment list. Should a relative path be specified, the path of the created segment files will be relative to the current working directory. When strftime_mkdir is set, the whole expanded value of filename will be written into the m3u8 segment list.
When "var_stream_map" is set with two or more variant streams, the filename pattern must contain the string "%v", this string specifies the position of variant stream index in the generated segment file names.
ffmpeg -i in.ts -b:v:0 1000k -b:v:1 256k -b:a:0 64k -b:a:1 32k \ -map 0:v -map 0:a -map 0:v -map 0:a -f hls -var_stream_map "v:0,a:0 v:1,a:1" \ -hls_segment_filename 'file_%v_%03d.ts' out_%v.m3u8
This example will produce the playlists segment file sets: file_0_000.ts, file_0_001.ts, file_0_002.ts, etc. and file_1_000.ts, file_1_001.ts, file_1_002.ts, etc.
The string "%v" may be present in the filename or in the last directory name containing the file, but only in one of them. (Additionally, %v may appear multiple times in the last sub- directory or filename.) If the string %v is present in the directory name, then sub-directories are created after expanding the directory name pattern. This enables creation of segments corresponding to different variant streams in subdirectories.
ffmpeg -i in.ts -b:v:0 1000k -b:v:1 256k -b:a:0 64k -b:a:1 32k \ -map 0:v -map 0:a -map 0:v -map 0:a -f hls -var_stream_map "v:0,a:0 v:1,a:1" \ -hls_segment_filename 'vs%v/file_%03d.ts' vs%v/out.m3u8
This example will produce the playlists segment file sets: vs0/file_000.ts, vs0/file_001.ts, vs0/file_002.ts, etc. and
ffmpeg -i in.nut -strftime 1 -hls_segment_filename 'file-%Y%m%d-%s.ts' out.m3u8
This example will produce the playlist, out.m3u8, and segment files: file-20160215-1455569023.ts, file-20160215-1455569024.ts, etc. Note: On some systems/environments, the %s specifier is not available. See "strftime()" documentation.
ffmpeg -i in.nut -strftime 1 -hls_flags second_level_segment_index -hls_segment_filename 'file-%Y%m%d-%%04d.ts' out.m3u8
This example will produce the playlist, out.m3u8, and segment files: file-20160215-0001.ts, file-20160215-0002.ts, etc.
strftime_mkdir Used together with -strftime_mkdir, it will create all subdirectories which is expanded in filename.
ffmpeg -i in.nut -strftime 1 -strftime_mkdir 1 -hls_segment_filename '%Y%m%d/file-%Y%m%d-%s.ts' out.m3u8
This example will create a directory 201560215 (if it does not exist), and then produce the playlist, out.m3u8, and segment files: 20160215/file-20160215-1455569023.ts, 20160215/file-20160215-1455569024.ts, etc.
ffmpeg -i in.nut -strftime 1 -strftime_mkdir 1 -hls_segment_filename '%Y/%m/%d/file-%Y%m%d-%s.ts' out.m3u8
This example will create a directory hierarchy 2016/02/15 (if any of them do not exist), and then produce the playlist, out.m3u8, and segment files: 2016/02/15/file-20160215-1455569023.ts, 2016/02/15/file-20160215-1455569024.ts, etc.
hls_segment_options options_list Set output format options using a :-separated list of key=value parameters. Values containing ":" special characters must be escaped.
hls_key_info_file key_info_file Use the information in key_info_file for segment encryption. The first line of key_info_file specifies the key URI written to the playlist. The key URL is used to access the encryption key during playback. The second line specifies the path to the key file used to obtain the key during the encryption process. The key file is read as a single packed array of 16 octets in binary format. The optional third line specifies the initialization vector (IV) as a hexadecimal string to be used instead of the segment sequence number (default) for encryption. Changes to key_info_file will result in segment encryption with the new key/IV and an entry in the playlist for the new key URI/IV if "hls_flags periodic_rekey" is enabled.
Key info file format:
<key URI> <key file path> <IV> (optional)
Example key URIs:
/path/to/file.key
Example IV:
0123456789ABCDEF0123456789ABCDEF
Key info file example:
http://server/file.key /path/to/file.key 0123456789ABCDEF0123456789ABCDEF
Example shell script:
#!/bin/sh BASE_URL=${1:-'.'} openssl rand 16 > file.key echo $BASE_URL/file.key > file.keyinfo echo file.key >> file.keyinfo echo $(openssl rand -hex 16) >> file.keyinfo ffmpeg -f lavfi -re -i testsrc -c:v h264 -hls_flags delete_segments \ -hls_key_info_file file.keyinfo out.m3u8
-hls_enc enc Enable (1) or disable (0) the AES128 encryption. When enabled every segment generated is encrypted and the encryption key is saved as playlist name.key.
-hls_enc_key key 16-octet key to encrypt the segments, by default it is randomly generated.
-hls_enc_key_url keyurl If set, keyurl is prepended instead of baseurl to the key filename in the playlist.
-hls_enc_iv iv 16-octet initialization vector for every segment instead of the autogenerated ones.
hls_segment_type flags Possible values:
mpegts Output segment files in MPEG-2 Transport Stream format. This is compatible with all HLS versions.
fmp4 Output segment files in fragmented MP4 format, similar to MPEG- DASH. fmp4 files may be used in HLS version 7 and above.
hls_fmp4_init_filename filename Set filename to the fragment files header file, default filename is init.mp4.
Use "-strftime 1" on filename to expand the segment filename with localtime.
ffmpeg -i in.nut -hls_segment_type fmp4 -strftime 1 -hls_fmp4_init_filename "%s_init.mp4" out.m3u8
filename pattern must contain the string "%v", this string specifies the position of variant stream index in the generated init file names. The string "%v" may be present in the filename or in the last directory name containing the file. If the string is present in the directory name, then sub-directories are created after expanding the directory name pattern. This enables creation of init files corresponding to different variant streams in subdirectories.
hls_flags flags Possible values:
single_file If this flag is set, the muxer will store all segments in a single MPEG-TS file, and will use byte ranges in the playlist. HLS playlists generated with this way will have the version number 4. For example:
ffmpeg -i in.nut -hls_flags single_file out.m3u8
Will produce the playlist, out.m3u8, and a single segment file, out.ts.
delete_segments Segment files removed from the playlist are deleted after a period of time equal to the duration of the segment plus the duration of the playlist.
append_list Append new segments into the end of old segment list, and remove the "#EXT-X-ENDLIST" from the old segment list.
round_durations Round the duration info in the playlist file segment info to integer values, instead of using floating point. If there are no other features requiring higher HLS versions be used, then this will allow ffmpeg to output a HLS version 2 m3u8.
discont_start Add the "#EXT-X-DISCONTINUITY" tag to the playlist, before the first segment's information.
omit_endlist Do not append the "EXT-X-ENDLIST" tag at the end of the playlist.
periodic_rekey The file specified by "hls_key_info_file" will be checked periodically and detect updates to the encryption info. Be sure to replace this file atomically, including the file containing the AES encryption key.
independent_segments Add the "#EXT-X-INDEPENDENT-SEGMENTS" to playlists that has video segments and when all the segments of that playlist are guaranteed to start with a Key frame.
iframes_only Add the "#EXT-X-I-FRAMES-ONLY" to playlists that has video and can cause some oddities during seeking. This flag should be used with the "hls_time" option.
program_date_time Generate "EXT-X-PROGRAM-DATE-TIME" tags.
second_level_segment_index Makes it possible to use segment indexes as %%d in hls_segment_filename expression besides date/time values when strftime is on. To get fixed width numbers with trailing zeroes, %%0xd format is available where x is the required width.
second_level_segment_size Makes it possible to use segment sizes (counted in bytes) as %%s in hls_segment_filename expression besides date/time values when strftime is on. To get fixed width numbers with trailing zeroes, %%0xs format is available where x is the required width.
second_level_segment_duration Makes it possible to use segment duration (calculated in microseconds) as %%t in hls_segment_filename expression besides date/time values when strftime is on. To get fixed width numbers with trailing zeroes, %%0xt format is available where x is the required width.
ffmpeg -i sample.mpeg \ -f hls -hls_time 3 -hls_list_size 5 \ -hls_flags second_level_segment_index+second_level_segment_size+second_level_segment_duration \ -strftime 1 -strftime_mkdir 1 -hls_segment_filename "segment_%Y%m%d%H%M%S_%%04d_%%08s_%%013t.ts" stream.m3u8
This will produce segments like this: segment_20170102194334_0003_00122200_0000003000000.ts, segment_20170102194334_0004_00120072_0000003000000.ts etc.
temp_file Write segment data to filename.tmp and rename to filename only once the segment is complete. A webserver serving up segments can be configured to reject requests to *.tmp to prevent access to in-progress segments before they have been added to the m3u8 playlist. This flag also affects how m3u8 playlist files are created. If this flag is set, all playlist files will written into temporary file and renamed after they are complete, similarly as segments are handled. But playlists with "file" protocol and with type ("hls_playlist_type") other than "vod" are always written into temporary file regardless of this flag. Master playlist files ("master_pl_name"), if any, with "file" protocol, are always written into temporary file regardless of this flag if "master_pl_publish_rate" value is other than zero.
hls_playlist_type event Emit "#EXT-X-PLAYLIST-TYPE:EVENT" in the m3u8 header. Forces hls_list_size to 0; the playlist can only be appended to.
hls_playlist_type vod Emit "#EXT-X-PLAYLIST-TYPE:VOD" in the m3u8 header. Forces hls_list_size to 0; the playlist must not change.
"refresh" times using the same method. Note that the HTTP server must support the given method for uploading files.
http_user_agent Override User-Agent field in HTTP header. Applicable only for HTTP output.
var_stream_map Map string which specifies how to group the audio, video and subtitle streams into different variant streams. The variant stream groups are separated by space. Expected string format is like this "a:0,v:0 a:1,v:1 ....". Here a:, v:, s: are the keys to specify audio, video and subtitle streams respectively. Allowed values are 0 to 9 (limited just based on practical usage).
When there are two or more variant streams, the output filename pattern must contain the string "%v", this string specifies the position of variant stream index in the output media playlist filenames. The string "%v" may be present in the filename or in the last directory name containing the file. If the string is present in the directory name, then sub-directories are created after expanding the directory name pattern. This enables creation of variant streams in subdirectories.
ffmpeg -re -i in.ts -b:v:0 1000k -b:v:1 256k -b:a:0 64k -b:a:1 32k \ -map 0:v -map 0:a -map 0:v -map 0:a -f hls -var_stream_map "v:0,a:0 v:1,a:1" \ http://example.com/live/out_%v.m3u8
This example creates two hls variant streams. The first variant stream will contain video stream of bitrate 1000k and audio stream of bitrate 64k and the second variant stream will contain video stream of bitrate 256k and audio stream of bitrate 32k. Here, two media playlist with file names out_0.m3u8 and out_1.m3u8 will be created. If you want something meaningful text instead of indexes in result names, you may specify names for each or some of the variants as in the following example.
ffmpeg -re -i in.ts -b:v:0 1000k -b:v:1 256k -b:a:0 64k -b:a:1 32k \ -map 0:v -map 0:a -map 0:v -map 0:a -f hls -var_stream_map "v:0,a:0,name:my_hd v:1,a:1,name:my_sd" \ http://example.com/live/out_%v.m3u8
This example creates two hls variant streams as in the previous one. But here, the two media playlist with file names out_my_hd.m3u8 and out_my_sd.m3u8 will be created.
ffmpeg -re -i in.ts -b:v:0 1000k -b:v:1 256k -b:a:0 64k \ -map 0:v -map 0:a -map 0:v -f hls -var_stream_map "v:0 a:0 v:1" \ http://example.com/live/out_%v.m3u8
This example creates three hls variant streams. The first variant stream will be a video only stream with video bitrate 1000k, the second variant stream will be an audio only stream with bitrate 64k and the third variant stream will be a video only stream with bitrate 256k. Here, three media playlist with file names out_0.m3u8, out_1.m3u8 and out_2.m3u8 will be created.
ffmpeg -re -i in.ts -b:v:0 1000k -b:v:1 256k -b:a:0 64k -b:a:1 32k \ -map 0:v -map 0:a -map 0:v -map 0:a -f hls -var_stream_map "v:0,a:0 v:1,a:1" \ http://example.com/live/vs_%v/out.m3u8 -map 0:a -map 0:a -map 0:v -map 0:v -f hls \ -var_stream_map "a:0,agroup:aud_low a:1,agroup:aud_high v:0,agroup:aud_low v:1,agroup:aud_high" \ -master_pl_name master.m3u8 \ http://example.com/live/out_%v.m3u8
This example creates two audio only and two video only variant streams. In addition to the #EXT-X-STREAM-INF tag for each variant stream in the master playlist, #EXT-X-MEDIA tag is also added for the two audio only variant streams and they are mapped to the two video only variant streams with audio group names 'aud_low' and 'aud_high'.
By default, a single hls variant containing all the encoded streams is created.
ffmpeg -re -i in.ts -b:a:0 32k -b:a:1 64k -b:v:0 1000k \ -map 0:a -map 0:a -map 0:v -f hls \ -var_stream_map "a:0,agroup:aud_low,default:yes a:1,agroup:aud_low v:0,agroup:aud_low" \ -master_pl_name master.m3u8 \ http://example.com/live/out_%v.m3u8
This example creates two audio only and one video only variant streams. In addition to the #EXT-X-STREAM-INF tag for each variant stream in the master playlist, #EXT-X-MEDIA tag is also added for the two audio only variant streams and they are mapped to the one video only variant streams with audio group name 'aud_low', and the audio group have default stat is NO or YES.
By default, a single hls variant containing all the encoded streams is created.
ffmpeg -re -i in.ts -b:a:0 32k -b:a:1 64k -b:v:0 1000k \ -map 0:a -map 0:a -map 0:v -f hls \ -var_stream_map "a:0,agroup:aud_low,default:yes,language:ENG a:1,agroup:aud_low,language:CHN v:0,agroup:aud_low" \ -master_pl_name master.m3u8 \ http://example.com/live/out_%v.m3u8
This example creates two audio only and one video only variant streams. In addition to the #EXT-X-STREAM-INF tag for each variant stream in the master playlist, #EXT-X-MEDIA tag is also added for the two audio only variant streams and they are mapped to the one video only variant streams with audio group name 'aud_low', and the audio group have default stat is NO or YES, and one audio have and language is named ENG, the other audio language is named CHN.
By default, a single hls variant containing all the encoded streams is created.
ffmpeg -y -i input_with_subtitle.mkv \ -b:v:0 5250k -c:v h264 -pix_fmt yuv420p -profile:v main -level 4.1 \ -b:a:0 256k \ -c:s webvtt -c:a mp2 -ar 48000 -ac 2 -map 0:v -map 0:a:0 -map 0:s:0 \ -f hls -var_stream_map "v:0,a:0,s:0,sgroup:subtitle" \ -master_pl_name master.m3u8 -t 300 -hls_time 10 -hls_init_time 4 -hls_list_size \ 10 -master_pl_publish_rate 10 -hls_flags \ delete_segments+discont_start+split_by_time ./tmp/video.m3u8
This example adds "#EXT-X-MEDIA" tag with "TYPE=SUBTITLES" in the master playlist with webvtt subtitle group name 'subtitle'. Please 'ccgroup' and 'instreamid' are mandatory attributes. 'language' is an optional attribute. The closed captions groups configured using this option are mapped to different variant streams by providing the same 'ccgroup' name in the "var_stream_map" string. If "var_stream_map" is not set, then the first available ccgroup in "cc_stream_map" is mapped to the output variant stream. The examples for these two use cases are given below.
ffmpeg -re -i in.ts -b:v 1000k -b:a 64k -a53cc 1 -f hls \ -cc_stream_map "ccgroup:cc,instreamid:CC1,language:en" \ -master_pl_name master.m3u8 \ http://example.com/live/out.m3u8
This example adds "#EXT-X-MEDIA" tag with "TYPE=CLOSED-CAPTIONS" in the master playlist with group name 'cc', language 'en' (english) and INSTREAM-ID 'CC1'. Also, it adds "CLOSED-CAPTIONS" attribute with group name 'cc' for the output variant stream.
ffmpeg -re -i in.ts -b:v:0 1000k -b:v:1 256k -b:a:0 64k -b:a:1 32k \ -a53cc:0 1 -a53cc:1 1\ -map 0:v -map 0:a -map 0:v -map 0:a -f hls \ -cc_stream_map "ccgroup:cc,instreamid:CC1,language:en ccgroup:cc,instreamid:CC2,language:sp" \ -var_stream_map "v:0,a:0,ccgroup:cc v:1,a:1,ccgroup:cc" \ -master_pl_name master.m3u8 \ http://example.com/live/out_%v.m3u8
This example adds two "#EXT-X-MEDIA" tags with "TYPE=CLOSED-CAPTIONS" in the master playlist for the INSTREAM-IDs 'CC1' and 'CC2'. Also, it adds "CLOSED-CAPTIONS" attribute with group name 'cc' for the two output variant streams.
master_pl_name Create HLS master playlist with the given name.
ffmpeg -re -i in.ts -f hls -master_pl_name master.m3u8 http://example.com/live/out.m3u8
This example creates HLS master playlist with name master.m3u8 and it is published at http://example.com/live/
master_pl_publish_rate Publish master play list repeatedly every after specified number of segment intervals.
ffmpeg -re -i in.ts -f hls -master_pl_name master.m3u8 \ -hls_time 2 -master_pl_publish_rate 30 http://example.com/live/out.m3u8
This example creates HLS master playlist with name master.m3u8 and keep publishing it repeatedly every after 30 segments i.e. every after 60s.
http_persistent Use persistent HTTP connections. Applicable only for HTTP output.
timeout Set timeout for socket I/O operations. Applicable only for HTTP output.
-ignore_io_errors Ignore IO errors during open, write and delete. Useful for long-
ICO file muxer.
Microsoft's icon file format (ICO) has some strict limitations that should be noted:
o Size cannot exceed 256 pixels in any dimension
o Only BMP and PNG images can be stored
o If a BMP image is used, it must be one of the following pixel formats:
BMP Bit Depth FFmpeg Pixel Format 1bit pal8 4bit pal8 8bit pal8 16bit rgb555le 24bit bgr24 32bit bgra
o If a BMP image is used, it must use the BITMAPINFOHEADER DIB header
o If a PNG image is used, it must use the rgba pixel format
image2 Image file muxer.
The image file muxer writes video frames to image files.
The output filenames are specified by a pattern, which can be used to produce sequentially numbered series of files. The pattern may contain the string "%d" or "%0Nd", this string specifies the position of the characters representing a numbering in the filenames. If the form "%0Nd" is used, the string representing the number in each filename is 0-padded to N digits. The literal character '%' can be specified in the pattern with the string "%%".
If the pattern contains "%d" or "%0Nd", the first filename of the file list specified will contain the number 1, all the following numbers will be sequential.
The pattern may contain a suffix which is used to automatically determine the format of the image files to write.
For example the pattern "img-%03d.bmp" will specify a sequence of filenames of the form img-001.bmp, img-002.bmp, ..., img-010.bmp, etc. The pattern "img%%-%d.jpg" will specify a sequence of filenames of the form img%-1.jpg, img%-2.jpg, ..., img%-10.jpg, etc.
The image muxer supports the .Y.U.V image file format. This format is special in that that each image frame consists of three files, for each of the YUV420P components. To read or write this image file format, specify the name of the '.Y' file. The muxer will automatically open the '.U' and '.V' files as required.
Options
frame_pts If set to 1, expand the filename with pts from pkt->pts. Default filename, not a pattern, and the corresponding file will be continuously overwritten with new images. Default value is 0.
strftime If set to 1, expand the filename with date and time information from "strftime()". Default value is 0.
atomic_writing Write output to a temporary file, which is renamed to target filename once writing is completed. Default is disabled.
protocol_opts options_list Set protocol options as a :-separated list of key=value parameters. Values containing the ":" special character must be escaped.
Examples
The following example shows how to use ffmpeg for creating a sequence of files img-001.jpeg, img-002.jpeg, ..., taking one image every second from the input video:
ffmpeg -i in.avi -vsync cfr -r 1 -f image2 'img-%03d.jpeg'
Note that with ffmpeg, if the format is not specified with the "-f" option and the output filename specifies an image file format, the image2 muxer is automatically selected, so the previous command can be written as:
ffmpeg -i in.avi -vsync cfr -r 1 'img-%03d.jpeg'
Note also that the pattern must not necessarily contain "%d" or "%0Nd", for example to create a single image file img.jpeg from the start of the input video you can employ the command:
ffmpeg -i in.avi -f image2 -frames:v 1 img.jpeg
The strftime option allows you to expand the filename with date and time information. Check the documentation of the "strftime()" function for the syntax.
For example to generate image files from the "strftime()" "%Y-%m-%d_%H-%M-%S" pattern, the following ffmpeg command can be used:
ffmpeg -f v4l2 -r 1 -i /dev/video0 -f image2 -strftime 1 "%Y-%m-%d_%H-%M-%S.jpg"
You can set the file name with current frame's PTS:
ffmpeg -f v4l2 -r 1 -i /dev/video0 -copyts -f image2 -frame_pts true %d.jpg"
A more complex example is to publish contents of your desktop directly to a WebDAV server every second:
ffmpeg -f x11grab -framerate 1 -i :0.0 -q:v 6 -update 1 -protocol_opts method=PUT http://example.com/desktop.jpg
matroska Matroska container muxer.
This muxer implements the matroska and webm container specs.

language Specify the language of the track in the Matroska languages form.
The language can be either the 3 letters bibliographic ISO-639-2 (ISO 639-2/B) form (like "fre" for French), or a language code mixed with a country code for specialities in languages (like "fre- ca" for Canadian French).
stereo_mode Set stereo 3D video layout of two views in a single video track.
The following values are recognized:
mono video is not stereo
left_right Both views are arranged side by side, Left-eye view is on the left
bottom_top Both views are arranged in top-bottom orientation, Left-eye view is at bottom
top_bottom Both views are arranged in top-bottom orientation, Left-eye view is on top
checkerboard_rl Each view is arranged in a checkerboard interleaved pattern, Left-eye view being first
checkerboard_lr Each view is arranged in a checkerboard interleaved pattern, Right-eye view being first
row_interleaved_rl Each view is constituted by a row based interleaving, Right-eye view is first row
row_interleaved_lr Each view is constituted by a row based interleaving, Left-eye view is first row
col_interleaved_rl Both views are arranged in a column based interleaving manner, Right-eye view is first column
col_interleaved_lr Both views are arranged in a column based interleaving manner, Left-eye view is first column
anaglyph_cyan_red All frames are in anaglyph format viewable through red-cyan filters
right_left Both views are arranged side by side, Right-eye view is on the Both eyes laced in one Block, Left-eye view is first
block_rl Both eyes laced in one Block, Right-eye view is first
For example a 3D WebM clip can be created using the following command line:
ffmpeg -i sample_left_right_clip.mpg -an -c:v libvpx -metadata stereo_mode=left_right -y stereo_clip.webm
Options
This muxer supports the following options:
reserve_index_space By default, this muxer writes the index for seeking (called cues in Matroska terms) at the end of the file, because it cannot know in advance how much space to leave for the index at the beginning of the file. However for some use cases -- e.g. streaming where seeking is possible but slow -- it is useful to put the index at the beginning of the file.
If this option is set to a non-zero value, the muxer will reserve a given amount of space in the file header and then try to write the cues there when the muxing finishes. If the reserved space does not suffice, no Cues will be written, the file will be finalized and writing the trailer will return an error. A safe size for most use cases should be about 50kB per hour of video.
Note that cues are only written if the output is seekable and this option will have no effect if it is not.
cues_to_front If set, the muxer will write the index at the beginning of the file by shifting the main data if necessary. This can be combined with reserve_index_space in which case the data is only shifted if the initially reserved space turns out to be insufficient.
This option is ignored if the output is unseekable.
default_mode This option controls how the FlagDefault of the output tracks will be set. It influences which tracks players should play by default. The default mode is passthrough.
infer Every track with disposition default will have the FlagDefault set. Additionally, for each type of track (audio, video or subtitle), if no track with disposition default of this type exists, then the first track of this type will be marked as default (if existing). This ensures that the default flag is set in a sensible way even if the input originated from containers that lack the concept of default tracks.
infer_no_subs This mode is the same as infer except that if no subtitle track with disposition default exists, no subtitle track will be marked as default.
indicates bitmap is stored bottom-up. Note that this option does not flip the bitmap which has to be done manually beforehand, e.g. by using the vflip filter. Default is false and indicates bitmap is stored top down.
md5 MD5 testing format.
This is a variant of the hash muxer. Unlike that muxer, it defaults to using the MD5 hash function.
Examples
To compute the MD5 hash of the input converted to raw audio and video, and store it in the file out.md5:
ffmpeg -i INPUT -f md5 out.md5
You can print the MD5 to stdout with the command:
ffmpeg -i INPUT -f md5 -
See also the hash and framemd5 muxers.
mov, mp4, ismv MOV/MP4/ISMV (Smooth Streaming) muxer.
The mov/mp4/ismv muxer supports fragmentation. Normally, a MOV/MP4 file has all the metadata about all packets stored in one location (written at the end of the file, it can be moved to the start for better playback by adding faststart to the movflags, or using the qt-faststart tool). A fragmented file consists of a number of fragments, where packets and metadata about these packets are stored together. Writing a fragmented file has the advantage that the file is decodable even if the writing is interrupted (while a normal MOV/MP4 is undecodable if it is not properly finished), and it requires less memory when writing very long files (since writing normal MOV/MP4 files stores info about every single packet in memory until the file is closed). The downside is that it is less compatible with other applications.
Options
Fragmentation is enabled by setting one of the AVOptions that define how to cut the file into fragments:
-moov_size bytes Reserves space for the moov atom at the beginning of the file instead of placing the moov atom at the end. If the space reserved is insufficient, muxing will fail.
-movflags frag_keyframe Start a new fragment at each video keyframe.
-frag_duration duration Create fragments that are duration microseconds long.
-frag_size size Create fragments that contain up to size bytes of payload data.
Don't create fragments that are shorter than duration microseconds long.
If more than one condition is specified, fragments are cut when one of the specified conditions is fulfilled. The exception to this is "-min_frag_duration", which has to be fulfilled for any of the other conditions to apply.
Additionally, the way the output file is written can be adjusted through a few other options:
-movflags empty_moov Write an initial moov atom directly at the start of the file, without describing any samples in it. Generally, an mdat/moov pair is written at the start of the file, as a normal MOV/MP4 file, containing only a short portion of the file. With this option set, there is no initial mdat atom, and the moov atom only describes the tracks but has a zero duration.
This option is implicitly set when writing ismv (Smooth Streaming) files.
-movflags separate_moof Write a separate moof (movie fragment) atom for each track. Normally, packets for all tracks are written in a moof atom (which is slightly more efficient), but with this option set, the muxer writes one moof/mdat pair for each track, making it easier to separate tracks.
This option is implicitly set when writing ismv (Smooth Streaming) files.
-movflags skip_sidx Skip writing of sidx atom. When bitrate overhead due to sidx atom is high, this option could be used for cases where sidx atom is not mandatory. When global_sidx flag is enabled, this option will be ignored.
-movflags faststart Run a second pass moving the index (moov atom) to the beginning of the file. This operation can take a while, and will not work in various situations such as fragmented output, thus it is not enabled by default.
-movflags rtphint Add RTP hinting tracks to the output file.
-movflags disable_chpl Disable Nero chapter markers (chpl atom). Normally, both Nero chapters and a QuickTime chapter track are written to the file. With this option set, only the QuickTime chapter track will be written. Nero chapters can cause failures when the file is reprocessed with certain tagging programs, like mp3Tag 2.61a and iTunes 11.3, most likely other versions are affected as well.
-movflags omit_tfhd_offset Do not write any absolute base_data_offset in tfhd atoms. This avoids tying fragments to absolute byte positions in the file/streams. calculations on the implicit end of the previous track fragment).
-write_tmcd Specify "on" to force writing a timecode track, "off" to disable it and "auto" to write a timecode track only for mov and mp4 output (default).
-movflags negative_cts_offsets Enables utilization of version 1 of the CTTS box, in which the CTS offsets can be negative. This enables the initial sample to have DTS/CTS of zero, and reduces the need for edit lists for some cases such as video tracks with B-frames. Additionally, eases conformance with the DASH-IF interoperability guidelines.
This option is implicitly set when writing ismv (Smooth Streaming) files.
-write_btrt bool Force or disable writing bitrate box inside stsd box of a track. The box contains decoding buffer size (in bytes), maximum bitrate and average bitrate for the track. The box will be skipped if none of these values can be computed. Default is "-1" or "auto", which will write the box only in MP4 mode.
-write_prft Write producer time reference box (PRFT) with a specified time source for the NTP field in the PRFT box. Set value as wallclock to specify timesource as wallclock time and pts to specify timesource as input packets' PTS values.
Setting value to pts is applicable only for a live encoding use case, where PTS values are set as as wallclock time at the source. For example, an encoding use case with decklink capture source where video_pts and audio_pts are set to abs_wallclock.
-empty_hdlr_name bool Enable to skip writing the name inside a "hdlr" box. Default is "false".
-movie_timescale scale Set the timescale written in the movie header box ("mvhd"). Range is 1 to INT_MAX. Default is 1000.
-video_track_timescale scale Set the timescale used for video tracks. Range is 0 to INT_MAX. If set to 0, the timescale is automatically set based on the native stream time base. Default is 0.
Example
Smooth Streaming content can be pushed in real time to a publishing point on IIS with this muxer. Example:
ffmpeg -re <<normal input/transcoding options>> -movflags isml+frag_keyframe -f ismv http://server/publishingpoint.isml/Streams(Encoder1)
mp3 The MP3 muxer writes a raw MP3 stream with the following optional features:
video stream with a single packet. There can be any number of those streams, each will correspond to a single APIC frame. The stream metadata tags title and comment map to APIC description and picture type respectively. See <http://id3.org/id3v2.4.0-frames> for allowed picture types.
Note that the APIC frames must be written at the beginning, so the muxer will buffer the audio frames until it gets all the pictures. It is therefore advised to provide the pictures as soon as possible to avoid excessive buffering.
o A Xing/LAME frame right after the ID3v2 header (if present). It is enabled by default, but will be written only if the output is seekable. The "write_xing" private option can be used to disable it. The frame contains various information that may be useful to the decoder, like the audio duration or encoder delay.
o A legacy ID3v1 tag at the end of the file (disabled by default). It may be enabled with the "write_id3v1" private option, but as its capabilities are very limited, its usage is not recommended.
Examples:
Write an mp3 with an ID3v2.3 header and an ID3v1 footer:
ffmpeg -i INPUT -id3v2_version 3 -write_id3v1 1 out.mp3
To attach a picture to an mp3 file select both the audio and the picture stream with "map":
ffmpeg -i input.mp3 -i cover.png -c copy -map 0 -map 1 -metadata:s:v title="Album cover" -metadata:s:v comment="Cover (Front)" out.mp3
Write a "clean" MP3 without any extra features:
ffmpeg -i input.wav -write_xing 0 -id3v2_version 0 out.mp3
mpegts MPEG transport stream muxer.
This muxer implements ISO 13818-1 and part of ETSI EN 300 468.
The recognized metadata settings in mpegts muxer are "service_provider" and "service_name". If they are not set the default for "service_provider" is FFmpeg and the default for "service_name" is Service01.
Options
The muxer options are:
mpegts_transport_stream_id integer Set the transport_stream_id. This identifies a transponder in DVB. Default is 0x0001.
mpegts_original_network_id integer Set the original_network_id. This is unique identifier of a network in DVB. Its main use is in the unique identification of a service through the path Original_Network_ID, Transport_Stream_ID. Default Set the program service_type. Default is "digital_tv". Accepts the following options:
hex_value Any hexadecimal value between 0x01 and 0xff as defined in ETSI 300 468.
digital_tv Digital TV service.
digital_radio Digital Radio service.
teletext Teletext service.
advanced_codec_digital_radio Advanced Codec Digital Radio service.
mpeg2_digital_hdtv MPEG2 Digital HDTV service.
advanced_codec_digital_sdtv Advanced Codec Digital SDTV service.
advanced_codec_digital_hdtv Advanced Codec Digital HDTV service.
mpegts_pmt_start_pid integer Set the first PID for PMTs. Default is 0x1000, minimum is 0x0020, maximum is 0x1ffa. This option has no effect in m2ts mode where the PMT PID is fixed 0x0100.
mpegts_start_pid integer Set the first PID for elementary streams. Default is 0x0100, minimum is 0x0020, maximum is 0x1ffa. This option has no effect in m2ts mode where the elementary stream PIDs are fixed.
mpegts_m2ts_mode boolean Enable m2ts mode if set to 1. Default value is "-1" which disables m2ts mode.
muxrate integer Set a constant muxrate. Default is VBR.
pes_payload_size integer Set minimum PES packet payload in bytes. Default is 2930.
mpegts_flags flags Set mpegts flags. Accepts the following options:
resend_headers Reemit PAT/PMT before writing the next packet.
latm Use LATM packetization for AAC.
pat_pmt_at_frames Reemit PAT and PMT at each video frame.
nit Emit NIT table.
omit_rai Disable writing of random access indicator.
mpegts_copyts boolean Preserve original timestamps, if value is set to 1. Default value is "-1", which results in shifting timestamps so that they start from 0.
omit_video_pes_length boolean Omit the PES packet length for video packets. Default is 1 (true).
pcr_period integer Override the default PCR retransmission time in milliseconds. Default is "-1" which means that the PCR interval will be determined automatically: 20 ms is used for CBR streams, the highest multiple of the frame duration which is less than 100 ms is used for VBR streams.
pat_period duration Maximum time in seconds between PAT/PMT tables. Default is 0.1.
sdt_period duration Maximum time in seconds between SDT tables. Default is 0.5.
nit_period duration Maximum time in seconds between NIT tables. Default is 0.5.
tables_version integer Set PAT, PMT, SDT and NIT version (default 0, valid values are from 0 to 31, inclusively). This option allows updating stream structure so that standard consumer may detect the change. To do so, reopen output "AVFormatContext" (in case of API usage) or restart ffmpeg instance, cyclically changing tables_version value:
ffmpeg -i source1.ts -codec copy -f mpegts -tables_version 0 udp://1.1.1.1:1111 ffmpeg -i source2.ts -codec copy -f mpegts -tables_version 1 udp://1.1.1.1:1111 ... ffmpeg -i source3.ts -codec copy -f mpegts -tables_version 31 udp://1.1.1.1:1111 ffmpeg -i source1.ts -codec copy -f mpegts -tables_version 0 udp://1.1.1.1:1111 ffmpeg -i source2.ts -codec copy -f mpegts -tables_version 1 udp://1.1.1.1:1111 ...
Example
ffmpeg -i file.mpg -c copy \ -mpegts_original_network_id 0x1122 \ -mpegts_transport_stream_id 0x3344 \ -mpegts_service_id 0x5566 \ -mpegts_pmt_start_pid 0x1500 \ -mpegts_start_pid 0x150 \ -metadata service_provider="Some provider" \ -metadata service_name="Some Channel" \ out.ts
mxf, mxf_d10, mxf_opatom MXF muxer.
them for mxf and mxf_opatom but not for mxf_d10
null Null muxer.
This muxer does not generate any output file, it is mainly useful for testing or benchmarking purposes.
For example to benchmark decoding with ffmpeg you can use the command:
ffmpeg -benchmark -i INPUT -f null out.null
Note that the above command does not read or write the out.null file, but specifying the output file is required by the ffmpeg syntax.
Alternatively you can write the command as:
ffmpeg -benchmark -i INPUT -f null -
nut -syncpoints flags Change the syncpoint usage in nut:
default use the normal low-overhead seeking aids. none do not use the syncpoints at all, reducing the overhead but making the stream non-seekable; Use of this option is not recommended, as the resulting files are very damage sensitive and seeking is not possible. Also in general the overhead from syncpoints is negligible. Note, -C<write_index> 0 can be used to disable all growing data tables, allowing to mux endless streams with limited memory and without these disadvantages.
timestamped extend the syncpoint with a wallclock field.
The none and timestamped flags are experimental.
-write_index bool Write index at the end, the default is to write an index.
ffmpeg -i INPUT -f_strict experimental -syncpoints none - | processor
ogg Ogg container muxer.
-page_duration duration Preferred page duration, in microseconds. The muxer will attempt to create pages that are approximately duration microseconds long. This allows the user to compromise between seek granularity and container overhead. The default is 1 second. A value of 0 will fill all segments, making pages as large as possible. A value of 1 will effectively use 1 packet-per-page in most situations, giving a small seek granularity at the cost of additional container overhead.
-serial_offset value Serial value from which to set the streams serial number. Setting it to different and sufficiently large values ensures that the produced ogg files can be safely chained.
Dolby Digital, also known as AC-3, audio.
adx
CRI Middleware ADX audio.
This muxer will write out the total sample count near the start of the first packet when the output is seekable and the count can be stored in 32 bits.
aptx
aptX (Audio Processing Technology for Bluetooth) audio.
aptx_hd
aptX HD (Audio Processing Technology for Bluetooth) audio.
Extensions: aptxhd
avs2
AVS2-P2/IEEE1857.4 video.
Extensions: avs, avs2
cavsvideo
Chinese AVS (Audio Video Standard) video.
Extensions: cavs
codec2raw
Codec 2 audio.
No extension is registered so format name has to be supplied e.g. with the ffmpeg CLI tool "-f codec2raw".
data
Data muxer accepts a single stream with any codec of any type. The input stream has to be selected using the "-map" option with the ffmpeg CLI tool.
No extension is registered so format name has to be supplied e.g. with the ffmpeg CLI tool "-f data".
dirac
BBC Dirac video. The Dirac Pro codec is a subset and is standardized as SMPTE VC-2.
Extensions: drc, vc2
dnxhd
Avid DNxHD video. It is standardized as SMPTE VC-3. Accepts DNxHR streams. eac3
Dolby Digital Plus, also known as Enhanced AC-3, audio.
g722
ITU-T G.722 audio.
g723_1
ITU-T G.723.1 audio.
Extensions: tco, rco
g726
ITU-T G.726 big-endian ("left-justified") audio.
No extension is registered so format name has to be supplied e.g. with the ffmpeg CLI tool "-f g726".
g726le
ITU-T G.726 little-endian ("right-justified") audio.
No extension is registered so format name has to be supplied e.g. with the ffmpeg CLI tool "-f g726le".
gsm
Global System for Mobile Communications audio.
h261
ITU-T H.261 video.
h263
ITU-T H.263 / H.263-1996, H.263+ / H.263-1998 / H.263 version 2 video.
h264
ITU-T H.264 / MPEG-4 Part 10 AVC video. Bitstream shall be converted to Annex B syntax if it's in length-prefixed mode.
Extensions: h264, 264
hevc
ITU-T H.265 / MPEG-H Part 2 HEVC video. Bitstream shall be converted to Annex B syntax if it's in length-prefixed mode.
Extensions: hevc, h265, 265
m4v
MPEG-4 Part 2 video.
mjpeg Meridian Lossless Packing, also known as Packed PCM, audio.
mp2
MPEG-1 Audio Layer II audio.
Extensions: mp2, m2a, mpa
mpeg1video
MPEG-1 Part 2 video.
Extensions: mpg, mpeg, m1v
mpeg2video
ITU-T H.262 / MPEG-2 Part 2 video.
Extensions: m2v
obu
AV1 low overhead Open Bitstream Units muxer. Temporal delimiter OBUs will be inserted in all temporal units of the stream.
rawvideo
Raw uncompressed video.
Extensions: yuv, rgb
sbc
Bluetooth SIG low-complexity subband codec audio.
Extensions: sbc, msbc
truehd
Dolby TrueHD audio.
Extensions: thd
vc1
SMPTE 421M / VC-1 video.
segment, stream_segment, ssegment Basic stream segmenter.
This muxer outputs streams to a number of separate files of nearly fixed duration. Output filename pattern can be set in a fashion similar to image2, or by using a "strftime" template if the strftime option is enabled.
"stream_segment" is a variant of the muxer used to write to streaming output formats, i.e. which do not require global headers, and is recommended for outputting e.g. to MPEG transport stream segments. "ssegment" is a shorter alias for "stream_segment". segment with the key frame found next after the specified start time.
The segment muxer works best with a single constant frame rate video.
Optionally it can generate a list of the created segments, by setting the option segment_list. The list type is specified by the segment_list_type option. The entry filenames in the segment list are set by default to the basename of the corresponding segment files.
See also the hls muxer, which provides a more specific implementation for HLS segmentation.
Options
The segment muxer supports the following options:
increment_tc 1|0 if set to 1, increment timecode between each segment If this is selected, the input need to have a timecode in the first video stream. Default value is 0.
reference_stream specifier Set the reference stream, as specified by the string specifier. If specifier is set to "auto", the reference is chosen automatically. Otherwise it must be a stream specifier (see the ``Stream specifiers'' chapter in the ffmpeg manual) which specifies the reference stream. The default value is "auto".
segment_format format Override the inner container format, by default it is guessed by the filename extension.
segment_format_options options_list Set output format options using a :-separated list of key=value parameters. Values containing the ":" special character must be escaped.
segment_list name Generate also a listfile named name. If not specified no listfile is generated.
segment_list_flags flags Set flags affecting the segment list generation.
It currently supports the following flags:
cache Allow caching (only affects M3U8 list files).
live Allow live-friendly file generation.
segment_list_size size Update the list file so that it contains at most size segments. If 0 the list file will contain all the segments. Default value is 0.
segment_list_entry_prefix prefix Prepend prefix to each entry. Useful to generate absolute paths. By default no prefix is applied. Generate a flat list for the created segments, one segment per line.
csv, ext Generate a list for the created segments, one segment per line, each line matching the format (comma-separated values):
<segment_filename>,<segment_start_time>,<segment_end_time>
segment_filename is the name of the output file generated by the muxer according to the provided pattern. CSV escaping (according to RFC4180) is applied if required.
segment_start_time and segment_end_time specify the segment start and end time expressed in seconds.
A list file with the suffix ".csv" or ".ext" will auto-select this format.
ext is deprecated in favor or csv.
ffconcat Generate an ffconcat file for the created segments. The resulting file can be read using the FFmpeg concat demuxer.
A list file with the suffix ".ffcat" or ".ffconcat" will auto- select this format.
m3u8 Generate an extended M3U8 file, version 3, compliant with <http://tools.ietf.org/id/draft-pantos-http-live-streaming>.
A list file with the suffix ".m3u8" will auto-select this format.
If not specified the type is guessed from the list file name suffix.
segment_time time Set segment duration to time, the value must be a duration specification. Default value is "2". See also the segment_times option.
Note that splitting may not be accurate, unless you force the reference stream key-frames at the given time. See the introductory notice and the examples below.
min_seg_duration time Set minimum segment duration to time, the value must be a duration specification. This prevents the muxer ending segments at a duration below this value. Only effective with "segment_time". Default value is "0".
segment_atclocktime 1|0 If set to "1" split at regular clock time intervals starting from 00:00 o'clock. The time value specified in segment_time is used for setting the length of the splitting interval.
For example with segment_time set to "900" this makes it possible
For example with segment_time set to "900" and segment_clocktime_offset set to "300" this makes it possible to create files at 12:05, 12:20, 12:35, etc.
Default value is "0".
segment_clocktime_wrap_duration duration Force the segmenter to only start a new segment if a packet reaches the muxer within the specified duration after the segmenting clock time. This way you can make the segmenter more resilient to backward local time jumps, such as leap seconds or transition to standard time from daylight savings time.
Default is the maximum possible duration which means starting a new segment regardless of the elapsed time since the last clock time.
segment_time_delta delta Specify the accuracy time when selecting the start time for a segment, expressed as a duration specification. Default value is "0".
When delta is specified a key-frame will start a new segment if its PTS satisfies the relation:
PTS >= start_time - time_delta
This option is useful when splitting video content, which is always split at GOP boundaries, in case a key frame is found just before the specified split time.
In particular may be used in combination with the ffmpeg option force_key_frames. The key frame times specified by force_key_frames may not be set accurately because of rounding issues, with the consequence that a key frame time may result set just before the specified time. For constant frame rate videos a value of 1/(2*frame_rate) should address the worst case mismatch between the specified time and the time set by force_key_frames.
segment_times times Specify a list of split points. times contains a list of comma separated duration specifications, in increasing order. See also the segment_time option.
segment_frames frames Specify a list of split video frame numbers. frames contains a list of comma separated integer numbers, in increasing order.
This option specifies to start a new segment whenever a reference stream key frame is found and the sequential number (starting from 0) of the frame is greater or equal to the next value in the list.
segment_wrap limit Wrap around segment index once it reaches limit.
segment_start_number number Set the sequence number of the first segment. Defaults to 0.
strftime 1|0 keyframes is inconsistent, but may make things worse on others, and can cause some oddities during seeking. Defaults to 0.
reset_timestamps 1|0 Reset timestamps at the beginning of each segment, so that each segment will start with near-zero timestamps. It is meant to ease the playback of the generated segments. May not work with some combinations of muxers/codecs. It is set to 0 by default.
initial_offset offset Specify timestamp offset to apply to the output packet timestamps. The argument must be a time duration specification, and defaults to 0.
write_empty_segments 1|0 If enabled, write an empty segment if there are no packets during the period a segment would usually span. Otherwise, the segment will be filled with the next packet written. Defaults to 0.
Make sure to require a closed GOP when encoding and to set the GOP size to fit your segment time constraint.
Examples
o Remux the content of file in.mkv to a list of segments out-000.nut, out-001.nut, etc., and write the list of generated segments to out.list:
ffmpeg -i in.mkv -codec hevc -flags +cgop -g 60 -map 0 -f segment -segment_list out.list out%03d.nut
o Segment input and set output format options for the output segments:
ffmpeg -i in.mkv -f segment -segment_time 10 -segment_format_options movflags=+faststart out%03d.mp4
o Segment the input file according to the split points specified by the segment_times option:
ffmpeg -i in.mkv -codec copy -map 0 -f segment -segment_list out.csv -segment_times 1,2,3,5,8,13,21 out%03d.nut
o Use the ffmpeg force_key_frames option to force key frames in the input at the specified location, together with the segment option segment_time_delta to account for possible roundings operated when setting key frame times.
ffmpeg -i in.mkv -force_key_frames 1,2,3,5,8,13,21 -codec:v mpeg4 -codec:a pcm_s16le -map 0 \ -f segment -segment_list out.csv -segment_times 1,2,3,5,8,13,21 -segment_time_delta 0.05 out%03d.nut
In order to force key frames on the input file, transcoding is required.
o Segment the input file by splitting the input file according to the frame numbers sequence specified with the segment_frames option:
ffmpeg -i in.mkv -codec copy -map 0 -f segment -segment_list out.csv -segment_frames 100,200,300,500,800 out%03d.nut
o Convert the in.mkv to TS segments using the "libx264" and "aac" encoders:

smoothstreaming Smooth Streaming muxer generates a set of files (Manifest, chunks) suitable for serving with conventional web server.
window_size Specify the number of fragments kept in the manifest. Default 0 (keep all).
extra_window_size Specify the number of fragments kept outside of the manifest before removing from disk. Default 5.
lookahead_count Specify the number of lookahead fragments. Default 2.
min_frag_duration Specify the minimum fragment duration (in microseconds). Default 5000000.
remove_at_exit Specify whether to remove all fragments when finished. Default 0 (do not remove).
streamhash Per stream hash testing format.
This muxer computes and prints a cryptographic hash of all the input frames, on a per-stream basis. This can be used for equality checks without having to do a complete binary comparison.
By default audio frames are converted to signed 16-bit raw audio and video frames to raw video before computing the hash, but the output of explicit conversions to other codecs can also be used. Timestamps are ignored. It uses the SHA-256 cryptographic hash function by default, but supports several other algorithms.
The output of the muxer consists of one line per stream of the form: streamindex,streamtype,algo=hash, where streamindex is the index of the mapped stream, streamtype is a single character indicating the type of stream, algo is a short string representing the hash function used, and hash is a hexadecimal number representing the computed hash.
hash algorithm Use the cryptographic hash function specified by the string algorithm. Supported values include "MD5", "murmur3", "RIPEMD128", "RIPEMD160", "RIPEMD256", "RIPEMD320", "SHA160", "SHA224", "SHA256" (default), "SHA512/224", "SHA512/256", "SHA384", "SHA512", "CRC32" and "adler32".
Examples
To compute the SHA-256 hash of the input converted to raw audio and video, and store it in the file out.sha256:
ffmpeg -i INPUT -f streamhash out.sha256
To print an MD5 hash to stdout use the command:
video over a network and save it to disk at the same time.
It is different from specifying several outputs to the ffmpeg command- line tool. With the tee muxer, the audio and video data will be encoded only once. With conventional multiple outputs, multiple encoding operations in parallel are initiated, which can be a very expensive process. The tee muxer is not useful when using the libavformat API directly because it is then possible to feed the same packets to several muxers directly.
Since the tee muxer does not represent any particular output format, ffmpeg cannot auto-select output streams. So all streams intended for output must be specified using "-map". See the examples below.
Some encoders may need different options depending on the output format; the auto-detection of this can not work with the tee muxer, so they need to be explicitly specified. The main example is the global_header flag.
The slave outputs are specified in the file name given to the muxer, separated by '|'. If any of the slave name contains the '|' separator, leading or trailing spaces or any special character, those must be escaped (see the "Quoting and escaping" section in the ffmpeg-utils(1) manual).
Options
use_fifo bool If set to 1, slave outputs will be processed in separate threads using the fifo muxer. This allows to compensate for different speed/latency/reliability of outputs and setup transparent recovery. By default this feature is turned off.
fifo_options Options to pass to fifo pseudo-muxer instances. See fifo.
Muxer options can be specified for each slave by prepending them as a list of key=value pairs separated by ':', between square brackets. If the options values contain a special character or the ':' separator, they must be escaped; note that this is a second level escaping.
The following special options are also recognized:
f Specify the format name. Required if it cannot be guessed from the output URL.
bsfs[/spec] Specify a list of bitstream filters to apply to the specified output.
It is possible to specify to which streams a given bitstream filter applies, by appending a stream specifier to the option separated by "/". spec must be a stream specifier (see Format stream specifiers).
If the stream specifier is not specified, the bitstream filters will be applied to all streams in the output. This will cause that output operation to fail if the output contains streams to which the bitstream filter cannot be applied e.g. "h264_mp4toannexb"
use_fifo bool This allows to override tee muxer use_fifo option for individual slave muxer.
fifo_options This allows to override tee muxer fifo_options for individual slave muxer. See fifo.
select Select the streams that should be mapped to the slave output, specified by a stream specifier. If not specified, this defaults to all the mapped streams. This will cause that output operation to fail if the output format does not accept all mapped streams.
You may use multiple stream specifiers separated by commas (",") e.g.: "a:0,v"
onfail Specify behaviour on output failure. This can be set to either "abort" (which is default) or "ignore". "abort" will cause whole process to fail in case of failure on this slave output. "ignore" will ignore failure on this output, so other outputs will continue without being affected.
Examples
o Encode something and both archive it in a WebM file and stream it as MPEG-TS over UDP:
ffmpeg -i ... -c:v libx264 -c:a mp2 -f tee -map 0:v -map 0:a "archive-20121107.mkv|[f=mpegts]udp://10.0.1.255:1234/"
o As above, but continue streaming even if output to local file fails (for example local drive fills up):
ffmpeg -i ... -c:v libx264 -c:a mp2 -f tee -map 0:v -map 0:a "[onfail=ignore]archive-20121107.mkv|[f=mpegts]udp://10.0.1.255:1234/"
o Use ffmpeg to encode the input, and send the output to three different destinations. The "dump_extra" bitstream filter is used to add extradata information to all the output video keyframes packets, as requested by the MPEG-TS format. The select option is applied to out.aac in order to make it contain only audio packets.
ffmpeg -i ... -map 0 -flags +global_header -c:v libx264 -c:a aac -f tee "[bsfs/v=dump_extra=freq=keyframe]out.ts|[movflags=+faststart]out.mp4|[select=a]out.aac"
o As above, but select only stream "a:1" for the audio output. Note that a second level escaping must be performed, as ":" is a special character used to separate options.
ffmpeg -i ... -map 0 -flags +global_header -c:v libx264 -c:a aac -f tee "[bsfs/v=dump_extra=freq=keyframe]out.ts|[movflags=+faststart]out.mp4|[select=\'a:1\']out.aac"
webm_chunk WebM Live Chunk Muxer.
This muxer writes out WebM headers and chunks as separate files which can be consumed by clients that support WebM Live streams via DASH.
header Filename of the header where the initialization data will be written.
audio_chunk_duration Duration of each audio chunk in milliseconds (defaults to 5000).
Example
ffmpeg -f v4l2 -i /dev/video0 \ -f alsa -i hw:0 \ -map 0:0 \ -c:v libvpx-vp9 \ -s 640x360 -keyint_min 30 -g 30 \ -f webm_chunk \ -header webm_live_video_360.hdr \ -chunk_start_index 1 \ webm_live_video_360_%d.chk \ -map 1:0 \ -c:a libvorbis \ -b:a 128k \ -f webm_chunk \ -header webm_live_audio_128.hdr \ -chunk_start_index 1 \ -audio_chunk_duration 1000 \ webm_live_audio_128_%d.chk
webm_dash_manifest WebM DASH Manifest muxer.
This muxer implements the WebM DASH Manifest specification to generate the DASH manifest XML. It also supports manifest generation for DASH live streams.
For more information see:
o WebM DASH Specification: <https://sites.google.com/a/webmproject.org/wiki/adaptive-streaming/webm-dash-specification>
o ISO DASH Specification: <http://standards.iso.org/ittf/PubliclyAvailableStandards/c065274_ISO_IEC_23009-1_2014.zip>
Options
This muxer supports the following options:
adaptation_sets This option has the following syntax: "id=x,streams=a,b,c id=y,streams=d,e" where x and y are the unique identifiers of the adaptation sets and a,b,c,d and e are the indices of the corresponding audio and video streams. Any number of adaptation sets can be added using this option.
live Set this to 1 to create a live stream DASH Manifest. Default: 0.
chunk_start_index Start index of the first chunk. This will go in the startNumber
utc_timing_url URL of the page that will return the UTC timestamp in ISO format. This will go in the value attribute of the UTCTiming element in the manifest. Default: None.
time_shift_buffer_depth Smallest time (in seconds) shifting buffer for which any Representation is guaranteed to be available. This will go in the timeShiftBufferDepth attribute of the MPD element. Default: 60.
minimum_update_period Minimum update period (in seconds) of the manifest. This will go in the minimumUpdatePeriod attribute of the MPD element. Default: 0.
Example
ffmpeg -f webm_dash_manifest -i video1.webm \ -f webm_dash_manifest -i video2.webm \ -f webm_dash_manifest -i audio1.webm \ -f webm_dash_manifest -i audio2.webm \ -map 0 -map 1 -map 2 -map 3 \ -c copy \ -f webm_dash_manifest \ -adaptation_sets "id=0,streams=0,1 id=1,streams=2,3" \ manifest.xml
METADATA FFmpeg is able to dump metadata from media files into a simple UTF-8-encoded INI-like text file and then load it back using the metadata muxer/demuxer.
The file format is as follows:
1. A file consists of a header and a number of metadata tags divided into sections, each on its own line.
2. The header is a ;FFMETADATA string, followed by a version number (now 1).
3. Metadata tags are of the form key=value
4. Immediately after header follows global metadata
5. After global metadata there may be sections with per-stream/per-chapter metadata.
6. A section starts with the section name in uppercase (i.e. STREAM or CHAPTER) in brackets ([, ]) and ends with next section or end of file.
7. At the beginning of a chapter section there may be an optional timebase to be used for start/end values. It must be in form TIMEBASE=num/den, where num and den are integers. If the timebase is missing then start/end times are assumed to be in nanoseconds.
Next a chapter section must contain chapter start and end times in form START=num, END=num, where num is a positive integer.
bar).
A ffmetadata file might look like this:
;FFMETADATA1 title=bike\\shed ;this is a comment artist=FFmpeg troll team
[CHAPTER] TIMEBASE=1/1000 START=0 #chapter ends at 0:01:00 END=60000 title=chapter \#1 [STREAM] title=multi\ line
By using the ffmetadata muxer and demuxer it is possible to extract metadata from an input file to an ffmetadata file, and then transcode the file into an output file with the edited ffmetadata file.
Extracting an ffmetadata file with ffmpeg goes as follows:
ffmpeg -i INPUT -f ffmetadata FFMETADATAFILE
Reinserting edited metadata information from the FFMETADATAFILE file can be done as:
ffmpeg -i INPUT -i FFMETADATAFILE -map_metadata 1 -codec copy OUTPUT
SEE ALSO ffmpeg(1), ffplay(1), ffprobe(1), libavformat(3)
AUTHORS The FFmpeg developers.
For details about the authorship, see the Git history of the project (https://git.ffmpeg.org/ffmpeg), e.g. by typing the command git log in the FFmpeg source directory, or browsing the online repository at <https://git.ffmpeg.org/ffmpeg>.
Maintainers for the specific components are listed in the file MAINTAINERS in the source code tree.
FFMPEG-FORMATS(1)