FreeBSD manual
download PDF document: openssl-ocsp.1.pdf
OPENSSL-OCSP(1ossl) OpenSSL OPENSSL-OCSP(1ossl)
NAME
openssl-ocsp - Online Certificate Status Protocol command
SYNOPSIS
OCSP Client
openssl ocsp [-help] [-out file] [-issuer file] [-cert file]
[-no_certs] [-serial n] [-signer file] [-signkey file] [-sign_other
file] [-nonce] [-no_nonce] [-req_text] [-resp_text] [-text] [-reqout
file] [-respout file] [-reqin file] [-respin file] [-url URL] [-host
host:port] [-path] [-proxy [http[s]://][userinfo@]host[:port][/path]]
[-no_proxy addresses] [-header] [-timeout seconds] [-VAfile file]
[-validity_period n] [-status_age n] [-noverify] [-verify_other file]
[-trust_other] [-no_intern] [-no_signature_verify] [-no_cert_verify]
[-no_chain] [-no_cert_checks] [-no_explicit] [-port num] [-ignore_err]
OCSP Server
openssl ocsp [-index file] [-CA file] [-rsigner file] [-rkey file]
[-passin arg] [-rother file] [-rsigopt nm:v] [-rmd digest] [-badsig]
[-resp_no_certs] [-nmin n] [-ndays n] [-resp_key_id] [-nrequest n]
[-multi process-count] [-rcid digest] [-ddiiggeesstt] [-CAfile file]
[-no-CAfile] [-CApath dir] [-no-CApath] [-CAstore uri] [-no-CAstore]
[-allow_proxy_certs] [-attime timestamp] [-no_check_time]
[-check_ss_sig] [-crl_check] [-crl_check_all] [-explicit_policy]
[-extended_crl] [-ignore_critical] [-inhibit_any] [-inhibit_map]
[-partial_chain] [-policy arg] [-policy_check] [-policy_print]
[-purpose purpose] [-suiteB_128] [-suiteB_128_only] [-suiteB_192]
[-trusted_first] [-no_alt_chains] [-use_deltas] [-auth_level num]
[-verify_depth num] [-verify_email email] [-verify_hostname hostname]
[-verify_ip ip] [-verify_name name] [-x509_strict] [-issuer_checks]
[-provider name] [-provider-path path] [-propquery propq]
DESCRIPTION
The Online Certificate Status Protocol (OCSP) enables applications to
determine the (revocation) state of an identified certificate (RFC
2560).
This command performs many common OCSP tasks. It can be used to print
out requests and responses, create requests and send queries to an OCSP
responder and behave like a mini OCSP server itself.
OPTIONS
This command operates as either a client or a server. The options are
described below, divided into those two modes.
OCSP Client Options
-help
Print out a usage message.
-out filename
specify output filename, default is standard output.
-issuer filename
This specifies the current issuer certificate. This option can be
used multiple times. This option MUST come before any -cert
options.
-serial num
Same as the -cert option except the certificate with serial number
num is added to the request. The serial number is interpreted as a
decimal integer unless preceded by "0x". Negative integers can also
be specified by preceding the value by a "-" sign.
-signer filename, -signkey filename
Sign the OCSP request using the certificate specified in the
-signer option and the private key specified by the -signkey
option. If the -signkey option is not present then the private key
is read from the same file as the certificate. If neither option is
specified then the OCSP request is not signed.
-sign_other filename
Additional certificates to include in the signed request. The
input can be in PEM, DER, or PKCS#12 format.
-nonce, -no_nonce
Add an OCSP nonce extension to a request or disable OCSP nonce
addition. Normally if an OCSP request is input using the -reqin
option no nonce is added: using the -nonce option will force
addition of a nonce. If an OCSP request is being created (using
-cert and -serial options) a nonce is automatically added
specifying -no_nonce overrides this.
-req_text, -resp_text, -text
Print out the text form of the OCSP request, response or both
respectively.
-reqout file, -respout file
Write out the DER encoded certificate request or response to file.
-reqin file, -respin file
Read OCSP request or response file from file. These option are
ignored if OCSP request or response creation is implied by other
options (for example with -serial, -cert and -host options).
-url responder_url
Specify the responder URL. Both HTTP and HTTPS (SSL/TLS) URLs can
be specified. The optional userinfo and fragment components are
ignored. Any given query component is handled as part of the path
component.
-host hostname:port, -path pathname
If the -host option is present then the OCSP request is sent to the
host hostname on port port. The -path option specifies the HTTP
pathname to use or "/" by default. This is equivalent to
specifying -url with scheme http:// and the given hostname, port,
and pathname.
-proxy [http[s]://][userinfo@]host[:port][/path]
The HTTP(S) proxy server to use for reaching the OCSP server unless
-no_proxy applies, see below. The proxy port defaults to 80 or 443
if the scheme is "https"; apart from that the optional "http://" or
"https://" prefix is ignored, as well as any userinfo and path
components. Defaults to the environment variable "http_proxy" if
set, else "HTTP_PROXY" in case no TLS is used, otherwise
"https_proxy" if set, else "HTTPS_PROXY".
-header name=value
Adds the header name with the specified value to the OCSP request
that is sent to the responder. This may be repeated.
-timeout seconds
Connection timeout to the OCSP responder in seconds. On POSIX
systems, when running as an OCSP responder, this option also limits
the time that the responder is willing to wait for the client
request. This time is measured from the time the responder accepts
the connection until the complete request is received.
-verify_other file
File or URI containing additional certificates to search when
attempting to locate the OCSP response signing certificate. Some
responders omit the actual signer's certificate from the response:
this option can be used to supply the necessary certificate in such
cases. The input can be in PEM, DER, or PKCS#12 format.
-trust_other
The certificates specified by the -verify_other option should be
explicitly trusted and no additional checks will be performed on
them. This is useful when the complete responder certificate chain
is not available or trusting a root CA is not appropriate.
-VAfile file
File or URI containing explicitly trusted responder certificates.
Equivalent to the -verify_other and -trust_other options. The
input can be in PEM, DER, or PKCS#12 format.
-noverify
Don't attempt to verify the OCSP response signature or the nonce
values. This option will normally only be used for debugging since
it disables all verification of the responders certificate.
-no_intern
Ignore certificates contained in the OCSP response when searching
for the signers certificate. With this option the signers
certificate must be specified with either the -verify_other or
-VAfile options.
-no_signature_verify
Don't check the signature on the OCSP response. Since this option
tolerates invalid signatures on OCSP responses it will normally
only be used for testing purposes.
-no_cert_verify
Don't verify the OCSP response signers certificate at all. Since
this option allows the OCSP response to be signed by any
certificate it should only be used for testing purposes.
-no_chain
Do not use certificates in the response as additional untrusted CA
certificates.
-no_explicit
Do not explicitly trust the root CA if it is set to be trusted for
OCSP signing.
-validity_period nsec, -status_age age
These options specify the range of times, in seconds, which will be
tolerated in an OCSP response. Each certificate status response
includes a notBefore time and an optional notAfter time. The
current time should fall between these two values, but the interval
between the two times may be only a few seconds. In practice the
OCSP responder and clients clocks may not be precisely synchronised
and so such a check may fail. To avoid this the -validity_period
option can be used to specify an acceptable error range in seconds,
the default value is 5 minutes.
If the notAfter time is omitted from a response then this means
that new status information is immediately available. In this case
the age of the notBefore field is checked to see it is not older
than age seconds old. By default this additional check is not
performed.
-rcid digest
This option sets the digest algorithm to use for certificate
identification in the OCSP response. Any digest supported by the
openssl-dgst(1) command can be used. The default is the same digest
algorithm used in the request.
-ddiiggeesstt
This option sets digest algorithm to use for certificate
identification in the OCSP request. Any digest supported by the
OpenSSL dgst command can be used. The default is SHA-1. This
option may be used multiple times to specify the digest used by
subsequent certificate identifiers.
-CAfile file, -no-CAfile, -CApath dir, -no-CApath, -CAstore uri,
-no-CAstore
See "Trusted Certificate Options" in
openssl-verification-options(1) for details.
-allow_proxy_certs, -attime, -no_check_time, -check_ss_sig, -crl_check,
-crl_check_all, -explicit_policy, -extended_crl, -ignore_critical,
-inhibit_any, -inhibit_map, -no_alt_chains, -partial_chain, -policy,
-policy_check, -policy_print, -purpose, -suiteB_128, -suiteB_128_only,
-suiteB_192, -trusted_first, -use_deltas, -auth_level, -verify_depth,
-verify_email, -verify_hostname, -verify_ip, -verify_name, -x509_strict
-issuer_checks
Set various options of certificate chain verification. See
"Verification Options" in openssl-verification-options(1) for
details.
-provider name
-provider-path path
-propquery propq
See "Provider Options" in openssl(1), provider(7), and property(7).
OCSP Server Options
-index indexfile
The indexfile parameter is the name of a text index file in ca
format containing certificate revocation information.
If the -index option is specified then this command switches to
responder mode, otherwise it is in client mode. The request(s) the
responder processes can be either specified on the command line
-CA file
CA certificate corresponding to the revocation information in the
index file given with -index. The input can be in PEM, DER, or
PKCS#12 format.
-rsigner file
The certificate to sign OCSP responses with.
-rkey file
The private key to sign OCSP responses with: if not present the
file specified in the -rsigner option is used.
-passin arg
The private key password source. For more information about the
format of arg see openssl-passphrase-options(1).
-rother file
Additional certificates to include in the OCSP response. The input
can be in PEM, DER, or PKCS#12 format.
-rsigopt nm:v
Pass options to the signature algorithm when signing OCSP
responses. Names and values of these options are algorithm-
specific.
-rmd digest
The digest to use when signing the response.
-badsig
Corrupt the response signature before writing it; this can be
useful for testing.
-resp_no_certs
Don't include any certificates in the OCSP response.
-resp_key_id
Identify the signer certificate using the key ID, default is to use
the subject name.
-port portnum
Port to listen for OCSP requests on. The port may also be specified
using the url option. A 0 argument indicates that any available
port shall be chosen automatically.
-ignore_err
Ignore malformed requests or responses: When acting as an OCSP
client, retry if a malformed response is received. When acting as
an OCSP responder, continue running instead of terminating upon
receiving a malformed request.
-nrequest number
The OCSP server will exit after receiving number requests, default
unlimited.
-multi process-count
Run the specified number of OCSP responder child processes, with
the parent process respawning child processes as needed. Child
processes will detect changes in the CA index file and
automatically reload it. When running as a responder -timeout
available: used in the nextUpdate field. If neither option is
present then the nextUpdate field is omitted meaning fresh
revocation information is immediately available.
OCSP RESPONSE VERIFICATION
OCSP Response follows the rules specified in RFC2560.
Initially the OCSP responder certificate is located and the signature
on the OCSP request checked using the responder certificate's public
key.
Then a normal certificate verify is performed on the OCSP responder
certificate building up a certificate chain in the process. The
locations of the trusted certificates used to build the chain can be
specified by the -CAfile, -CApath or -CAstore options or they will be
looked for in the standard OpenSSL certificates directory.
If the initial verify fails then the OCSP verify process halts with an
error.
Otherwise the issuing CA certificate in the request is compared to the
OCSP responder certificate: if there is a match then the OCSP verify
succeeds.
Otherwise the OCSP responder certificate's CA is checked against the
issuing CA certificate in the request. If there is a match and the
OCSPSigning extended key usage is present in the OCSP responder
certificate then the OCSP verify succeeds.
Otherwise, if -no_explicit is not set the root CA of the OCSP
responders CA is checked to see if it is trusted for OCSP signing. If
it is the OCSP verify succeeds.
If none of these checks is successful then the OCSP verify fails.
What this effectively means if that if the OCSP responder certificate
is authorised directly by the CA it is issuing revocation information
about (and it is correctly configured) then verification will succeed.
If the OCSP responder is a "global responder" which can give details
about multiple CAs and has its own separate certificate chain then its
root CA can be trusted for OCSP signing. For example:
openssl x509 -in ocspCA.pem -addtrust OCSPSigning -out trustedCA.pem
Alternatively the responder certificate itself can be explicitly
trusted with the -VAfile option.
NOTES
As noted, most of the verify options are for testing or debugging
purposes. Normally only the -CApath, -CAfile, -CAstore and (if the
responder is a 'global VA') -VAfile options need to be used.
The OCSP server is only useful for test and demonstration purposes: it
is not really usable as a full OCSP responder. It contains only a very
simple HTTP request handling and can only handle the POST form of OCSP
queries. It also handles requests serially meaning it cannot respond to
new requests until it has processed the current one. The text index
file format of revocation is also inefficient for large quantities of
openssl ocsp -issuer issuer.pem -cert c1.pem -cert c2.pem -reqout req.der
Send a query to an OCSP responder with URL http://ocsp.myhost.com/ save
the response to a file, print it out in text form, and verify the
response:
openssl ocsp -issuer issuer.pem -cert c1.pem -cert c2.pem \
-url http://ocsp.myhost.com/ -resp_text -respout resp.der
Read in an OCSP response and print out text form:
openssl ocsp -respin resp.der -text -noverify
OCSP server on port 8888 using a standard ca configuration, and a
separate responder certificate. All requests and responses are printed
to a file.
openssl ocsp -index demoCA/index.txt -port 8888 -rsigner rcert.pem -CA demoCA/cacert.pem
-text -out log.txt
As above but exit after processing one request:
openssl ocsp -index demoCA/index.txt -port 8888 -rsigner rcert.pem -CA demoCA/cacert.pem
-nrequest 1
Query status information using an internally generated request:
openssl ocsp -index demoCA/index.txt -rsigner rcert.pem -CA demoCA/cacert.pem
-issuer demoCA/cacert.pem -serial 1
Query status information using request read from a file, and write the
response to a second file.
openssl ocsp -index demoCA/index.txt -rsigner rcert.pem -CA demoCA/cacert.pem
-reqin req.der -respout resp.der
HISTORY
The -no_alt_chains option was added in OpenSSL 1.1.0.
COPYRIGHT
Copyright 2001-2021 The OpenSSL Project Authors. All Rights Reserved.
Licensed under the Apache License 2.0 (the "License"). You may not use
this file except in compliance with the License. You can obtain a copy
in the file LICENSE in the source distribution or at
<https://www.openssl.org/source/license.html>.
3.0.11 2023-09-22 OPENSSL-OCSP(1ossl)