FreeBSD manual
download PDF document: uhsoctl.1.pdf
UHSOCTL(1) FreeBSD General Commands Manual UHSOCTL(1)
NAME
uhsoctl - connection utility for Option based devices
SYNOPSIS
uhsoctl [-a apn] [-c cid] [-p pin] [-u username] [-k password] [-r path]
[-f path] [-b | -n] interface
uhsoctl -d interface
uhsoctl -h
DESCRIPTION
uhsoctl is a small connection utility for Option N.V. devices that are
based on Options packet interface and uses proprietary AT_* calls to
establish connections. The utility (tries to) configure both default
route and name servers (/etc/resolv.conf).
By default uhsoctl detaches from the terminal upon on a successful
connection, a few command-line options exists that allows this behavior
to be changed.
uhsoctl attempts to find a usable controlling serial port based on the
provided network interface. If this fails you might specify a serial
port manually.
OPTIONS
-a apn
Specify APN to connect to.
-c cid
Specify CID (Context ID) to use, by default CID 1 is used. If an
APN has been configured once, it's enough to specify the CID used
for further accesses.
-p pin
Specify SIM PIN.
-u username
Specify username.
-k password
Specify username.
-r path
Path to resolv.conf, default /etc/resolv.conf. Use /dev/null to
disable updating of name servers.
-f path
Explicitly set the serial port to use as controlling terminal.
Might be needed if the automatic detection fails.
-b Fork into background directly, before a connection has been
established.
-n Never fork into background, run entirely in foreground.
EXAMPLES
Connect to "apn.example.com" on interface "uhso0" and use PIN "1234" to
enable the SIM card.
FreeBSD 14.0-RELEASE-p6 August 12, 2009 FreeBSD 14.0-RELEASE-p6