FreeBSD manual
download PDF document: cuse_dev_destroy.3.pdf
CUSE(3) FreeBSD Library Functions Manual CUSE(3)
NAME
libcuse - Userland character device library
LIBRARY
Userland Character Device Library (libcuse, -lcuse)
SYNOPSIS
To load the required kernel module at boot time, place the following line
in loader.conf(5):
cuse_load="YES"
#include <cuse.h>
DESCRIPTION
The libcuse library contains functions to create a character device in
userspace. The libcuse library is thread safe.
LIBRARY INITIALISATION / DEINITIALISATION
int cuse_init(void) This function initialises libcuse. Must be called at
the beginning of the program. This function returns 0 on success or a
negative value on failure. See CUSE_ERR_XXX for known error codes. If
the cuse kernel module is not loaded, CUSE_ERR_NOT_LOADED is returned.
int cuse_uninit(void) Deinitialise libcuse. Can be called at the end of
the application. This function returns 0 on success or a negative value
on failure. See CUSE_ERR_XXX for known error codes.
UNIT MANAGEMENT
int cuse_alloc_unit_number(int *) This function stores a uniq system unit
number at the pointed integer loation. This function returns 0 on
success or a negative value on failure. See CUSE_ERR_XXX for known error
codes.
int cuse_alloc_unit_number_by_id(int *, int id) This function stores a
unique system unit number at the pointed integer loation. The returned
unit number is uniq within the given ID. Valid ID values are defined by
the cuse include file. See the CUSE_ID_XXX() macros for more
information. This function returns 0 on success or a negative value on
failure. See CUSE_ERR_XXX for known error codes.
int cuse_free_unit_number(int) This function frees the given allocated
system unit number. This function returns 0 on success or a negative
value on failure. See CUSE_ERR_XXX for known error codes.
int cuse_free_unit_number_by_id(int unit, int id) This function frees the
given allocated system unit number belonging to the given ID. If both
the unit and id argument is -1, all allocated units will be freed. This
function returns 0 on success or a negative value on failure. See
CUSE_ERR_XXX for known error codes.
LIBRARY USAGE
void * cuse_vmalloc(unsigned size) This function allocates size bytes of
memory. Only memory allocated by this function can be memory mapped by
mmap(2). This function returns a valid data pointer on success or NULL
on failure. The returned pointer is always aligned to the system page
size. The number and size of allocations is limited by the mmap(2)
void cuse_vmfree(void *) This function frees memory allocated by
cuse_vmalloc(). This function is NULL safe.
unsigned long cuse_vmoffset(void *) This function returns the mmap offset
the client must use to access the allocated memory. The passed pointer
must be aligned to the system page size.
struct cuse_dev * cuse_dev_create(const struct cuse_methods *mtod, void
*priv0, void *priv1, uid_t, gid_t, int permission, const char *fmt, ...)
This function creates a new character device according to the given
parameters. This function returns a valid cuse_dev structure pointer on
success or NULL on failure. The device name can only contain a-z, A-Z,
0-9, dot, / and underscore characters.
void cuse_dev_destroy(struct cuse_dev *) This functions destroys a
previously created character device.
void * cuse_dev_get_priv0(struct cuse_dev *), void *
cuse_dev_get_priv1(struct cuse_dev *), void cuse_dev_set_priv0(struct
cuse_dev *, void *), void cuse_dev_set_priv1(struct cuse_dev *, void *)
These functions are used to set and get the private data of the given
cuse device.
int cuse_wait_and_process(void) This function will block and do event
processing. If parallel I/O is required multiple threads must be created
looping on this function. This function returns 0 on success or a
negative value on failure. See CUSE_ERR_XXX for known error codes.
void * cuse_dev_get_per_file_handle(struct cuse_dev *), void
cuse_dev_set_per_file_handle(struct cuse_dev *, void *) These functions
are used to set and get the per-file-open specific handle and should only
be used inside the cuse file operation callbacks.
void cuse_set_local(int) This function instructs cuse_copy_out() and
cuse_copy_in() that the user pointer is local, if the argument passed to
it is non-zero. Else the user pointer is assumed to be at the peer
application. This function should only be used inside the cuse file
operation callbacks. The value is reset to zero when the given file
operation returns, and does not affect any other file operation
callbacks.
int cuse_get_local(void) Returns the current local state. See
cuse_set_local().
int cuse_copy_out(const void *src, void *peer_dst, int len), int
cuse_copy_in(const void *peer_src, void *dst, int len) These functions
are used to transfer data between the local application and the peer
application. These functions must be used when operating on the data
pointers passed to the cm_read(), cm_write(), and cm_ioctl() callback
functions. These functions return 0 on success or a negative value on
failure. See CUSE_ERR_XXX for known error codes.
int cuse_got_peer_signal(void) This function is used to check if a signal
has been delivered to the peer application and should only be used inside
the cuse file operation callbacks. This function returns 0 if a signal
has been delivered to the caller. Else it returns a negative value. See
CUSE_ERR_XXX for known error codes.
struct cuse_dev * cuse_dev_get_current(int *pcmd) This function is used
LIBRARY LIMITATIONS
Transfer lengths for read(), write(), cuse_copy_in(), and cuse_copy_out()
should not exceed what can fit into a 32-bit signed integer and is
defined by the CUSE_LENGTH_MAX() macro. Transfer lengths for ioctls
should not exceed what is defined by the CUSE_BUFFER_MAX() macro.
LIBRARY CALLBACK METHODS
In general fflags are defined by CUSE_FFLAG_XXX and errors are defined by
CUSE_ERR_XXX.
enum {
CUSE_ERR_NONE
CUSE_ERR_BUSY
CUSE_ERR_WOULDBLOCK
CUSE_ERR_INVALID
CUSE_ERR_NO_MEMORY
CUSE_ERR_FAULT
CUSE_ERR_SIGNAL
CUSE_ERR_OTHER
CUSE_ERR_NOT_LOADED
CUSE_ERR_NO_DEVICE
CUSE_POLL_NONE
CUSE_POLL_READ
CUSE_POLL_WRITE
CUSE_POLL_ERROR
CUSE_FFLAG_NONE
CUSE_FFLAG_READ
CUSE_FFLAG_WRITE
CUSE_FFLAG_NONBLOCK
CUSE_FFLAG_COMPAT32
CUSE_CMD_NONE
CUSE_CMD_OPEN
CUSE_CMD_CLOSE
CUSE_CMD_READ
CUSE_CMD_WRITE
CUSE_CMD_IOCTL
CUSE_CMD_POLL
CUSE_CMD_SIGNAL
CUSE_CMD_SYNC
CUSE_CMD_MAX
};
int cuse_open_t(struct cuse_dev *, int fflags) This function returns a
CUSE_ERR_XXX value.
int cuse_close_t(struct cuse_dev *, int fflags) This function returns a
CUSE_ERR_XXX value.
int cuse_read_t(struct cuse_dev *, int fflags, void *peer_ptr, int len)
This function returns a CUSE_ERR_XXX value in case of failure or the
actually transferred length in case of success. cuse_copy_in() and
cuse_copy_out() must be used to transfer data to and from the peer_ptr.
int cuse_write_t(struct cuse_dev *, int fflags, const void *peer_ptr, int
len) This function returns a CUSE_ERR_XXX value in case of failure or the
int cuse_poll_t(struct cuse_dev *, int fflags, int events) This function
returns a mask of CUSE_POLL_XXX values in case of failure and success.
The events argument is also a mask of CUSE_POLL_XXX values.
struct cuse_methods {
cuse_open_t *cm_open;
cuse_close_t *cm_close;
cuse_read_t *cm_read;
cuse_write_t *cm_write;
cuse_ioctl_t *cm_ioctl;
cuse_poll_t *cm_poll;
};
HISTORY
libcuse was written by Hans Petter Selasky.
FreeBSD 14.0-RELEASE-p11 July 18, 2022 FreeBSD 14.0-RELEASE-p11