• Start
• Documentation
  • PostgreSQL
  • mnoGoSearch
  • Apache 2.4
  • FreeBSD handbook
  • FreeBSD Manual
  • FreeBSD Source
• Tools
• Search
• Protected Area

plain

FreeBSD manual

keyword 1 2 3 4 5 6 7 8 9 n l

download PDF document: pmc.k8.3.pdf

PMC.K8(3) FreeBSD Library Functions Manual PMC.K8(3)
NAME pmc.k8 - measurement events for AMD Athlon 64 (K8 family) CPUs
LIBRARY Performance Counters Library (libpmc, -lpmc)
SYNOPSIS #include <pmc.h>
DESCRIPTION AMD K8 PMCs are present in the AMD Athlon64 and AMD Opteron series of CPUs. They are documented in the BIOS and Kernel Developer's Guide for the AMD Athlon(tm) 64 and AMD Opteron Processors, Publication No. 26094, Advanced Micro Devices, Inc., April 2004.
PMC Features AMD K8 PMCs are 48 bits wide. Each CPU contains 4 PMCs with the following capabilities:
Capability Support PMC_CAP_CASCADE No PMC_CAP_EDGE Yes PMC_CAP_INTERRUPT Yes PMC_CAP_INVERT Yes PMC_CAP_READ Yes PMC_CAP_PRECISE No PMC_CAP_SYSTEM Yes PMC_CAP_TAGGING No PMC_CAP_THRESHOLD Yes PMC_CAP_USER Yes PMC_CAP_WRITE Yes
Event Qualifiers Event specifiers for AMD K8 PMCs can have the following optional qualifiers:
count=value Configure the counter to increment only if the number of configured events measured in a cycle is greater than or equal to value.
edge Configure the counter to only count negated-to-asserted transitions of the conditions expressed by the other fields. In other words, the counter will increment only once whenever a given condition becomes true, irrespective of the number of clocks during which the condition remains true.
inv Invert the sense of comparison when the "count" qualifier is present, making the counter to increment when the number of events per cycle is less than the value specified by the "count" qualifier.
mask=qualifier Many event specifiers for AMD K8 PMCs need to be additionally qualified using a mask qualifier. These additional qualifiers are event-specific and are documented along with their associated event specifiers below.
to enable both.
AMD K8 Event Specifiers The event specifiers supported on AMD K8 PMCs are:
k8-bu-cpu-clk-unhalted (Event 76H) Count the number of clock cycles when the CPU is not in the HLT or STPCLK states.
k8-bu-fill-request-l2-miss [,mask=qualifier] (Event 7EH) Count fill requests that missed in the L2 cache. This event may be further qualified using qualifier, which is a `+' separated set of the following keywords:
dc-fill Count data cache fill requests. ic-fill Count instruction cache fill requests. tlb-reload Count TLB reloads.
The default is to count all types of requests.
k8-bu-fill-into-l2 [,mask=qualifier] (Event 7FH) The number of lines written to and from the L2 cache. The event may be further qualified by using qualifier, which is a `+' separated set of the following keywords:
dirty-l2-victim Count lines written into L2 cache due to victim writebacks from the Icache or Dcache, TLB page table walks or hardware data prefetches. victim-from-l2 Count writebacks of dirty lines from L2 to the system.
k8-bu-internal-l2-request [,mask=qualifier] (Event 7DH) Count internally generated requests to the L2 cache. This event may be further qualified using qualifier, which is a `+' separated set of the following keywords:
cancelled Count cancelled requests. dc-fill Count data cache fill requests. ic-fill Count instruction cache fill requests. tag-snoop Count tag snoop requests. tlb-reload Count TLB reloads.
The default is to count all types of requests.
k8-dc-access (Event 40H) Count data cache accesses including microcode scratch pad accesses.
k8-dc-copyback [,mask=qualifier] (Event 44H) Count data cache copyback operations. This event may modified Count operations for lines in the "modified" state. owner Count operations for lines in the "owner" state. shared Count operations for lines in the "shared" state.
The default is to count operations for lines in all the above states.
k8-dc-dcache-accesses-by-locks [,mask=qualifier] (Event 4CH) Count data cache accesses by lock instructions. This event is only available on processors of revision C or later vintage. This event may be further qualified using qualifier, which is a `+' separated set of the following keywords:
accesses Count data cache accesses by lock instructions. misses Count data cache misses by lock instructions.
The default is to count all accesses.
k8-dc-dispatched-prefetch-instructions [,mask=qualifier] (Event 4BH) Count the number of dispatched prefetch instructions. This event may be further qualified using qualifier, which is a `+' separated set of the following keywords:
load Count load operations. nta Count non-temporal operations. store Count store operations.
The default is to count all operations.
k8-dc-l1-dtlb-miss-and-l2-dtlb-hit (Event 45H) Count L1 DTLB misses that are L2 DTLB hits.
k8-dc-l1-dtlb-miss-and-l2-dtlb-miss (Event 46H) Count L1 DTLB misses that are also misses in the L2 DTLB.
k8-dc-microarchitectural-early-cancel-of-an-access (Event 49H) Count microarchitectural early cancels of data cache accesses.
k8-dc-microarchitectural-late-cancel-of-an-access (Event 48H) Count microarchitectural late cancels of data cache accesses.
k8-dc-misaligned-data-reference (Event 47H) Count misaligned data references.
k8-dc-miss (Event 41H) Count data cache misses.
k8-dc-one-bit-ecc-error [,mask=qualifier] (Event 4AH) Count one bit ECC errors found by the scrubber. This event may be further qualified using qualifier, which is a `+' separated set of the following keywords:
scrubber Count scrubber detected errors.
may be further qualified using qualifier, which is a `+' separated set of the following keywords:
exclusive Count operations for lines in the "exclusive" state. invalid Count operations for lines in the "invalid" state. modified Count operations for lines in the "modified" state. owner Count operations for lines in the "owner" state. shared Count operations for lines in the "shared" state.
The default is to count operations for lines in all the above states.
k8-dc-refill-from-system [,mask=qualifier] (Event 43H) Count data cache refills from system memory. This event may be further qualified using qualifier, which is a `+' separated set of the following keywords:
exclusive Count operations for lines in the "exclusive" state. invalid Count operations for lines in the "invalid" state. modified Count operations for lines in the "modified" state. owner Count operations for lines in the "owner" state. shared Count operations for lines in the "shared" state.
The default is to count operations for lines in all the above states.
k8-fp-cycles-with-no-fpu-ops-retired (Event 01H) Count cycles when no FPU ops were retired. This event is supported in revision B and later CPUs.
k8-fp-dispatched-fpu-fast-flag-ops (Event 02H) Count dispatched FPU ops that use the fast flag interface. This event is supported in revision B and later CPUs.
k8-fp-dispatched-fpu-ops [,mask=qualifier] (Event 00H) Count the number of dispatched FPU ops. This event is supported in revision B and later CPUs. This event may be further qualified using qualifier, which is a `+' separated set of the following keywords:
add-pipe-excluding-junk-ops Count add pipe ops excluding junk ops. add-pipe-junk-ops Count junk ops in the add pipe. multiply-pipe-excluding-junk-ops Count multiply pipe ops excluding junk ops. multiply-pipe-junk-ops Count junk ops in the multiply pipe. store-pipe-excluding-junk-ops Count store pipe ops excluding junk ops store-pipe-junk-ops Count junk ops in the store pipe.
(Event D4H) Count dispatch stalls for segment loads.
k8-fr-dispatch-stall-for-serialization (Event D3H) Count dispatch stalls for serialization.
k8-fr-dispatch-stall-from-branch-abort-to-retire (Event D2H) Count dispatch stalls from branch abort to retiral.
k8-fr-dispatch-stall-when-fpu-is-full (Event D7H) Count dispatch stalls when the FPU is full.
k8-fr-dispatch-stall-when-ls-is-full (Event D8H) Count dispatch stalls when the load/store unit is full.
k8-fr-dispatch-stall-when-reorder-buffer-is-full (Event D5H) Count dispatch stalls when the reorder buffer is full.
k8-fr-dispatch-stall-when-reservation-stations-are-full (Event D6H) Count dispatch stalls when reservation stations are full.
k8-fr-dispatch-stall-when-waiting-far-xfer-or-resync-branch-pending (Event DAH) Count dispatch stalls when a far control transfer or a resync branch is pending.
k8-fr-dispatch-stall-when-waiting-for-all-to-be-quiet (Event D9H) Count dispatch stalls when waiting for all to be quiet.
k8-fr-dispatch-stalls (Event D1H) Count all dispatch stalls.
k8-fr-fpu-exceptions [,mask=qualifier] (Event DBH) Count FPU exceptions. This event is supported in revision B and later CPUs. This event may be further qualified using qualifier, which is a `+' separated set of the following keywords:
sse-and-x87-microtraps Count SSE and x87 microtraps. sse-reclass-microfaults Count SSE reclass microfaults sse-retype-microfaults Count SSE retype microfaults x87-reclass-microfaults Count x87 reclass microfaults.
The default is to count all types of exceptions.
k8-fr-interrupts-masked-cycles (Event CDH) Count cycles when interrupts were masked (by CPU RFLAGS field IF was zero).
k8-fr-interrupts-masked-while-pending-cycles (Event CEH) Count cycles while interrupts were masked while pending (i.e., cycles when INTR was asserted while CPU RFLAGS field IF was zero).
k8-fr-number-of-breakpoints-for-dr2 (Event DEH) Count the number of breakpoints for DR2.
k8-fr-number-of-breakpoints-for-dr3 (Event DFH) Count the number of breakpoints for DR3.
k8-fr-retired-branches (Event C2H) Count retired branches including exceptions and interrupts.
k8-fr-retired-branches-mispredicted (Event C3H) Count mispredicted retired branches.
k8-fr-retired-far-control-transfers (Event C6H) Count retired far control transfers (which are always mispredicted).
k8-fr-retired-fastpath-double-op-instructions [,mask=qualifier] (Event CCH) Count retired fastpath double op instructions. This event is supported in revision B and later CPUs. This event may be further qualified using qualifier, which is a `+' separated set of the following keywords:
low-op-pos-0 Count instructions with the low op in position 0. low-op-pos-1 Count instructions with the low op in position 1. low-op-pos-2 Count instructions with the low op in position 2.
The default is to count all types of instructions.
k8-fr-retired-fpu-instructions [,mask=qualifier] (Event CBH) Count retired FPU instructions. This event is supported in revision B and later CPUs. This event may be further qualified using qualifier, which is a `+' separated set of the following keywords:
mmx-3dnow Count MMX and 3DNow! instructions. packed-sse-sse2 Count packed SSE and SSE2 instructions. scalar-sse-sse2 Count scalar SSE and SSE2 instructions x87 Count x87 instructions.
The default is to count all types of instructions.
k8-fr-retired-near-returns (Event C8H) Count retired near returns.
k8-fr-retired-near-returns-mispredicted (Event C9H) Count mispredicted near returns.
k8-fr-retired-resyncs (Event C7H) Count retired resyncs (non-control transfer branches).
k8-fr-retired-taken-branches only due to an address miscompare.
k8-fr-retired-taken-hardware-interrupts (Event CFH) Count retired taken hardware interrupts.
k8-fr-retired-uops (Event C1H) Count retired uops.
k8-fr-retired-x86-instructions (Event C0H) Count retired x86 instructions including exceptions and interrupts.
k8-ic-fetch (Event 80H) Count instruction cache fetches.
k8-ic-instruction-fetch-stall (Event 87H) Count cycles in stalls due to instruction fetch.
k8-ic-l1-itlb-miss-and-l2-itlb-hit (Event 84H) Count L1 ITLB misses that are L2 ITLB hits.
k8-ic-l1-itlb-miss-and-l2-itlb-miss (Event 85H) Count ITLB misses that miss in both L1 and L2 ITLBs.
k8-ic-microarchitectural-resync-by-snoop (Event 86H) Count microarchitectural resyncs caused by snoops.
k8-ic-miss (Event 81H) Count instruction cache misses.
k8-ic-refill-from-l2 (Event 82H) Count instruction cache refills from L2 cache.
k8-ic-refill-from-system (Event 83H) Count instruction cache refills from system memory.
k8-ic-return-stack-hits (Event 88H) Count hits to the return stack.
k8-ic-return-stack-overflow (Event 89H) Count overflows of the return stack.
k8-ls-buffer2-full (Event 23H) Count load/store buffer2 full events.
k8-ls-locked-operation [,mask=qualifier] (Event 24H) Count locked operations. For revision C and later CPUs, the following qualifiers are supported:
cycles-in-request Count the number of cycles in the lock request/grant stage. cycles-to-complete Count the number of cycles a lock takes to complete once it is non-speculative and is the older load/store operation. locked-instructions Count the number of lock instructions executed.
(Event 21H) Count microarchitectural resyncs caused by self- modifying code.
k8-ls-microarchitectural-resync-by-snoop (Event 22H) Count microarchitectural resyncs caused by snoops.
k8-ls-retired-cflush-instructions (Event 26H) Count retired CFLUSH instructions.
k8-ls-retired-cpuid-instructions (Event 27H) Count retired CPUID instructions.
k8-ls-segment-register-load [,mask=qualifier] (Event 20H) Count segment register loads. This event may be further qualified using qualifier, which is a `+' separated set of the following keywords: cs Count CS register loads. ds Count DS register loads. es Count ES register loads. fs Count FS register loads. gs Count GS register loads. ss Count SS register loads.
The default is to count all types of loads.
k8-nb-ht-bus0-bandwidth [,mask=qualifier]
k8-nb-ht-bus1-bandwidth [,mask=qualifier]
k8-nb-ht-bus2-bandwidth [,mask=qualifier] (Events F6H, F7H and F8H respectively) Count events on the HyperTransport(tm) buses. These events may be further qualified using qualifier, which is a `+' separated set of the following keywords:
buffer-release Count buffer release messages sent. command Count command messages sent. data Count data messages sent. nop Count nop messages sent.
The default is to count all types of messages.
k8-nb-memory-controller-bypass-saturation [,mask=qualifier] (Event E4H) Count memory controller bypass counter saturation events. This event may be further qualified using qualifier, which is a `+' separated set of the following keywords:
dram-controller-interface-bypass Count DRAM controller interface bypass. dram-controller-queue-bypass Count DRAM controller queue bypass. memory-controller-hi-pri-bypass Count memory controller high priority bypasses. memory-controller-lo-pri-bypass Count memory controller low priority bypasses.
k8-nb-memory-controller-dram-slots-missed
page-conflict Count page conflicts. page-hit Count page hits. page-miss Count page misses.
The default is to count all types of events.
k8-nb-memory-controller-page-table-overflow (Event E1H) Count memory control page table overflow events.
k8-nb-memory-controller-turnaround [,mask=qualifier] (Event E3H) Count memory control turnaround events. This event may be further qualified using qualifier, which is a `+' separated set of the following keywords:
dimm-turnaround Count DIMM turnarounds. read-to-write-turnaround Count read to write turnarounds. write-to-read-turnaround Count write to read turnarounds.
The default is to count all types of events.
k8-nb-probe-result [,mask=qualifier] (Event ECH) Count probe events. This event may be further qualified using qualifier, which is a `+' separated set of the following keywords:
probe-hit Count all probe hits. probe-hit-dirty-no-memory-cancel Count probe hits without memory cancels. probe-hit-dirty-with-memory-cancel Count probe hits with memory cancels. probe-miss Count probe misses.
k8-nb-sized-commands [,mask=qualifier] (Event EBH) Count sized commands issued. This event may be further qualified using qualifier, which is a `+' separated set of the following keywords:
nonpostwrszbyte nonpostwrszdword postwrszbyte postwrszdword rdszbyte rdszdword rdmodwr
The default is to count all types of commands.
Event Name Aliases The following table shows the mapping between the PMC-independent aliases supported by Performance Counters Library (libpmc, -lpmc) and the instructions k8-fr-retired-x86-instructions interrupts k8-fr-taken-hardware-interrupts unhalted-cycles k8-bu-cpu-clk-unhalted
SEE ALSO pmc(3), pmc.atom(3), pmc.core(3), pmc.core2(3), pmc.iaf(3), pmc.k7(3), pmc.soft(3), pmc.tsc(3), pmclog(3), hwpmc(4)
HISTORY The pmc library first appeared in FreeBSD 6.0.
AUTHORS The Performance Counters Library (libpmc, -lpmc) library was written by Joseph Koshy <jkoshy@FreeBSD.org>.
FreeBSD 14.0-RELEASE-p6 October 4, 2008 FreeBSD 14.0-RELEASE-p6