FreeBSD manual
download PDF document: rad_init_send_request.3.pdf
LIBRADIUS(3) FreeBSD Library Functions Manual LIBRADIUS(3)
NAME
libradius - RADIUS client/server library
SYNOPSIS
#include <radlib.h>
struct rad_handle *
rad_acct_open(void);
int
rad_add_server(struct rad_handle *h, const char *host, int port,
const char *secret, int timeout, int max_tries);
int
rad_add_server_ex(struct rad_handle *h, const char *host, int port,
const char *secret, int timeout, int max_tries, int dead_time,
struct in_addr *bindto);
struct rad_handle *
rad_auth_open(void);
void
rad_close(struct rad_handle *h);
int
rad_config(struct rad_handle *h, const char *file);
int
rad_continue_send_request(struct rad_handle *h, int selected, int *fd,
struct timeval *tv);
int
rad_create_request(struct rad_handle *h, int code);
int
rad_create_response(struct rad_handle *h, int code);
struct in_addr
rad_cvt_addr(const void *data);
uint32_t
rad_cvt_int(const void *data);
char *
rad_cvt_string(const void *data, size_t len);
int
rad_get_attr(struct rad_handle *h, const void **data, size_t *len);
int
rad_get_vendor_attr(uint32_t *vendor, const void **data, size_t *len);
int
rad_init_send_request(struct rad_handle *h, int *fd, struct timeval *tv);
int
rad_put_addr(struct rad_handle *h, int type, struct in_addr addr);
int
rad_put_string(struct rad_handle *h, int type, const char *str);
int
rad_put_message_authentic(struct rad_handle *h);
int
rad_put_vendor_addr(struct rad_handle *h, int vendor, int type,
struct in_addr addr);
int
rad_put_vendor_attr(struct rad_handle *h, int vendor, int type,
const void *data, size_t len);
int
rad_put_vendor_int(struct rad_handle *h, int vendor, int type,
uint32_t value);
int
rad_put_vendor_string(struct rad_handle *h, int vendor, int type,
const char *str);
ssize_t
rad_request_authenticator(struct rad_handle *h, char *buf, size_t len);
int
rad_receive_request(struct rad_handle *h);
int
rad_send_request(struct rad_handle *h);
int
rad_send_response(struct rad_handle *h);
struct rad_handle *
rad_server_open(int fd);
const char *
rad_server_secret(struct rad_handle *h);
void
rad_bind_to(struct rad_handle *h, in_addr_t addr);
u_char *
rad_demangle(struct rad_handle *h, const void *mangled, size_t mlen);
u_char *
rad_demangle_mppe_key(struct rad_handle *h, const void *mangled,
size_t mlen, size_t *len);
const char *
rad_strerror(struct rad_handle *h);
DESCRIPTION
The libradius library implements the Remote Authentication Dial In User
Service (RADIUS). RADIUS, defined in RFCs 2865 and 2866, allows clients
to perform authentication and accounting by means of network requests to
remote servers.
rad_server_open() always succeed unless insufficient virtual memory is
available. If the necessary memory cannot be allocated, the functions
return NULL. For compatibility with earlier versions of this library,
rad_open() is provided as a synonym for rad_auth_open().
Before issuing any RADIUS requests, the library must be made aware of the
servers it can contact. The easiest way to configure the library is to
call rad_config(). rad_config() causes the library to read a
configuration file whose format is described in radius.conf(5). The
pathname of the configuration file is passed as the file argument to
rad_config(). This argument may also be given as NULL, in which case the
standard configuration file /etc/radius.conf is used. rad_config()
returns 0 on success, or -1 if an error occurs.
The library can also be configured programmatically by calls to
rad_add_server() or rad_add_server_ex(). rad_add_server() is a backward
compatible function, implemented via rad_add_server_ex(). The host
parameter specifies the server host, either as a fully qualified domain
name or as a dotted-quad IP address in text form. The port parameter
specifies the UDP port to contact on the server. If port is given as 0,
the library looks up the `radius/udp' or `radacct/udp' service in the
network services(5) database, and uses the port found there. If no entry
is found, the library uses the standard RADIUS ports, 1812 for
authentication and 1813 for accounting. The shared secret for the server
host is passed to the secret parameter. It may be any NUL-terminated
string of bytes. The RADIUS protocol ignores all but the leading 128
bytes of the shared secret. The timeout for receiving replies from the
server is passed to the timeout parameter, in units of seconds. The
maximum number of repeated requests to make before giving up is passed
into the max_tries parameter. Time interval in seconds when the server
will not be requested if it is marked as dead (did not answer on the last
try) set with dead_time parameter. bindto parameter is an IP address on
the multihomed host that is used as a source address for all requests.
rad_add_server() returns 0 on success, or -1 if an error occurs.
rad_add_server() or rad_add_server_ex() may be called multiple times, and
they may be used together with rad_config(). At most 10 servers may be
specified. When multiple servers are given, they are tried in round-
robin fashion until a valid response is received, or until each server's
max_tries limit has been reached.
Creating a RADIUS Request
A RADIUS request consists of a code specifying the kind of request, and
zero or more attributes which provide additional information. To begin
constructing a new request, call rad_create_request(). In addition to
the usual struct rad_handle *, this function takes a code parameter which
specifies the type of the request. Most often this will be
RAD_ACCESS_REQUEST. rad_create_request() returns 0 on success, or -1 on
if an error occurs.
After the request has been created with rad_create_request(), attributes
can be attached to it. This is done through calls to rad_put_addr(),
rad_put_int(), and rad_put_string(). Each accepts a type parameter
identifying the attribute, and a value which may be an Internet address,
an integer, or a NUL-terminated string, respectively. Alternatively,
rad_put_vendor_addr(), rad_put_vendor_int() or rad_put_vendor_string()
may be used to specify vendor specific attributes. Vendor specific
definitions may be found in <radlib_vs.h>
attribute. It can be added by using the rad_put_message_authentic()
function. The libradius library calculates the HMAC-MD5 hash implicitly
before sending the request. If the Message-Authenticator was found
inside the response packet, then the packet is silently dropped, if the
validation failed. In order to get this feature, the library should be
compiled with OpenSSL support.
The rad_put_X() functions return 0 on success, or -1 if an error occurs.
Sending the Request and Receiving the Response
After the RADIUS request has been constructed, it is sent either by means
of rad_send_request() or by a combination of calls to
rad_init_send_request() and rad_continue_send_request().
The rad_send_request() function sends the request and waits for a valid
reply, retrying the defined servers in round-robin fashion as necessary.
If a valid response is received, rad_send_request() returns the RADIUS
code which specifies the type of the response. This will typically be
RAD_ACCESS_ACCEPT, RAD_ACCESS_REJECT, or RAD_ACCESS_CHALLENGE. If no
valid response is received, rad_send_request() returns -1.
As an alternative, if you do not wish to block waiting for a response,
rad_init_send_request() and rad_continue_send_request() may be used
instead. If a reply is received from the RADIUS server or a timeout
occurs, these functions return a value as described for
rad_send_request(). Otherwise, a value of zero is returned and the
values pointed to by fd and tv are set to the descriptor and timeout that
should be passed to select(2).
rad_init_send_request() must be called first, followed by repeated calls
to rad_continue_send_request() as long as a return value of zero is
given. Between each call, the application should call select(2), passing
*fd as a read descriptor and timing out after the interval specified by
tv. When select(2) returns, rad_continue_send_request() should be called
with selected set to a non-zero value if select(2) indicated that the
descriptor is readable.
Like RADIUS requests, each response may contain zero or more attributes.
After a response has been received successfully by rad_send_request() or
rad_continue_send_request(), its attributes can be extracted one by one
using rad_get_attr(). Each time rad_get_attr() is called, it gets the
next attribute from the current response, and stores a pointer to the
data and the length of the data via the reference parameters data and
len, respectively. Note that the data resides in the response itself,
and must not be modified. A successful call to rad_get_attr() returns
the RADIUS attribute type. If no more attributes remain in the current
response, rad_get_attr() returns 0. If an error such as a malformed
attribute is detected, -1 is returned.
If rad_get_attr() returns RAD_VENDOR_SPECIFIC, rad_get_vendor_attr() may
be called to determine the vendor. The vendor specific RADIUS attribute
type is returned. The reference parameters data and len (as returned
from rad_get_attr()) are passed to rad_get_vendor_attr(), and are
adjusted to point to the vendor specific attribute data.
The common types of attributes can be decoded using rad_cvt_addr(),
rad_cvt_int(), and rad_cvt_string(). These functions accept a pointer to
the attribute data, which should have been obtained using rad_get_attr()
and optionally rad_get_vendor_attr(). In the case of rad_cvt_string(),
NULL. rad_cvt_addr() and rad_cvt_int() cannot fail.
The rad_request_authenticator() function may be used to obtain the
Request-Authenticator attribute value associated with the current RADIUS
server according to the supplied rad_handle. The target buffer buf of
length len must be supplied and should be at least 16 bytes. The return
value is the number of bytes written to buf or -1 to indicate that len
was not large enough.
The rad_server_secret() returns the secret shared with the current RADIUS
server according to the supplied rad_handle.
The rad_bind_to() assigns a source address for all requests to the
current RADIUS server.
The rad_demangle() function demangles attributes containing passwords and
MS-CHAPv1 MPPE-Keys. The return value is NULL on failure, or the
plaintext attribute. This value should be freed using free(3) when it is
no longer needed.
The rad_demangle_mppe_key() function demangles the send- and recv-keys
when using MPPE (see RFC 2548). The return value is NULL on failure, or
the plaintext attribute. This value should be freed using free(3) when
it is no longer needed.
Obtaining Error Messages
Those functions which accept a struct rad_handle * argument record an
error message if they fail. The error message can be retrieved by
calling rad_strerror(). The message text is overwritten on each new
error for the given struct rad_handle *. Thus the message must be copied
if it is to be preserved through subsequent library calls using the same
handle.
Cleanup
To free the resources used by the RADIUS library, call rad_close().
Server operation
Server mode operates much alike to client mode, except packet send and
receive steps are swapped. To operate as server you should obtain server
context with rad_server_open() function, passing opened and bound UDP
socket file descriptor as argument. You should define allowed clients
and their secrets using rad_add_server() function. port, timeout and
max_tries arguments are ignored in server mode. You should call
rad_receive_request() function to receive request from client. If you do
not want to block on socket read, you are free to use any poll(),
select() or non-blocking sockets for the socket. Received request can be
parsed with same parsing functions as for client. To respond to the
request you should call rad_create_response() and fill response content
with same packet writing functions as for client. When packet is ready,
it should be sent with rad_send_response().
RETURN VALUES
The following functions return a non-negative value on success. If they
detect an error, they return -1 and record an error message which can be
retrieved using rad_strerror().
rad_add_server()
rad_config()
rad_create_request()
rad_init_send_request()
rad_continue_send_request()
rad_send_request()
rad_send_response()
The following functions return a non-NULL pointer on success. If they
are unable to allocate sufficient virtual memory, they return NULL,
without recording an error message.
rad_acct_open()
rad_auth_open()
rad_server_open()
rad_cvt_string()
The following functions return a non-NULL pointer on success. If they
fail, they return NULL, with recording an error message.
rad_demangle()
rad_demangle_mppe_key()
FILES
/etc/radius.conf
SEE ALSO
radius.conf(5)
C. Rigney, et al, Remote Authentication Dial In User Service (RADIUS),
RFC 2865.
C. Rigney, RADIUS Accounting, RFC 2866.
G. Zorn, Microsoft Vendor-specific RADIUS attributes, RFC 2548.
C. Rigney, et al, RADIUS extensions, RFC 2869.
AUTHORS
This software was originally written by John Polstra, and donated to the
FreeBSD project by Juniper Networks, Inc. Oleg Semyonov subsequently
added the ability to perform RADIUS accounting. Later additions and
changes by Michael Bretterklieber. Server mode support was added by
Alexander Motin.
FreeBSD 14.0-RELEASE-p11 August 5, 2009 FreeBSD 14.0-RELEASE-p11