FreeBSD manual
download PDF document: aac.4.pdf
AAC(4) FreeBSD Kernel Interfaces Manual AAC(4)
NAME
aac - Adaptec AdvancedRAID Controller driver
SYNOPSIS
To compile this driver into the kernel, place the following lines in your
kernel configuration file:
device pci
device aac
device aacp
To compile in debugging code:
options AAC_DEBUG=N
Alternatively, to load the driver as a module at boot time, place the
following line in loader.conf(5):
aac_load="YES"
DESCRIPTION
The aac driver provides support for the Adaptec AAC family of SCSI
Ultra2, Ultra160, and Ultra320, SATA and SAS RAID controllers.
Access to RAID containers is available via the /dev/aacd? device nodes.
The aacp device enables the SCSI pass-thru interface and allows devices
connected to the card such as CD-ROMs to be available via the CAM scsi(4)
subsystem. Note that not all cards allow this interface to be enabled.
The /dev/aac? device nodes provide access to the management interface of
the controller. One node exists per installed card. The aliases
/dev/afa? and /dev/hpn? exist for compatibility with the Dell and HP
versions of management tools, respectively. If the aac_linux.ko and
linux.ko modules are loaded, the Linux-compatible ioctl(2) interface for
the management device will be enabled and will allow Linux-based
management applications to control the card.
HARDWARE
Controllers supported by the aac driver include:
o Adaptec AAC-364
o Adaptec RAID 2045
o Adaptec RAID 2405
o Adaptec RAID 2445
o Adaptec RAID 2805
o Adaptec RAID 3085
o Adaptec RAID 31205
o Adaptec RAID 31605
o Adaptec RAID 5085
o Adaptec RAID 51205
o Adaptec RAID 51245
o Adaptec RAID 51605
o Adaptec RAID 51645
o Adaptec RAID 52445
o Adaptec RAID 5405
o Adaptec RAID 5445
o Adaptec RAID 5805
o Adaptec SAS RAID 3405
o Adaptec SATA RAID 2026ZCR
o Adaptec SATA RAID 2410SA
o Adaptec SATA RAID 2420SA
o Adaptec SATA RAID 2610SA
o Adaptec SATA RAID 2620SA
o Adaptec SATA RAID 2810SA
o Adaptec SATA RAID 2820SA
o Adaptec SATA RAID 21610SA
o Adaptec SCSI RAID 2020ZCR
o Adaptec SCSI RAID 2025ZCR
o Adaptec SCSI RAID 2120S
o Adaptec SCSI RAID 2130S
o Adaptec SCSI RAID 2130SLP
o Adaptec SCSI RAID 2230SLP
o Adaptec SCSI RAID 2200S
o Adaptec SCSI RAID 2240S
o Adaptec SCSI RAID 3230S
o Adaptec SCSI RAID 3240S
o Adaptec SCSI RAID 5400S
o Dell CERC SATA RAID 2
o Dell PERC 2/Si
o Dell PERC 2/QC
o Dell PERC 3/Si
o Dell PERC 3/Di
o Dell PERC 320/DC
o HP ML110 G2 (Adaptec SATA RAID 2610SA)
o HP NetRAID 4M
o IBM ServeRAID 8i
o IBM ServeRAID 8k
o IBM ServeRAID 8s
o ICP RAID ICP5045BL
o ICP RAID ICP5085BL
o ICP RAID ICP5085SL
o ICP RAID ICP5125BR
o ICP RAID ICP5125SL
o ICP RAID ICP5165BR
o ICP RAID ICP5165SL
o ICP RAID ICP5445SL
o ICP RAID ICP5805BL
o ICP RAID ICP5805SL
o ICP ICP5085BR SAS RAID
o ICP ICP9085LI SAS RAID
o ICP ICP9047MA SATA RAID
o ICP ICP9067MA SATA RAID
o ICP ICP9087MA SATA RAID
o ICP ICP9014RO SCSI RAID
o ICP ICP9024RO SCSI RAID
o Legend S220
o Legend S230
o Sun STK RAID REM
o Sun STK RAID EM
o SG-XPCIESAS-R-IN
o SG-XPCIESAS-R-EX
o AOC-USAS-S4i
o AOC-USAS-S8i
o AOC-USAS-S4iR
o AOC-USAS-S8iR
o AOC-USAS-S8i-LP
o AOC-USAS-S8iR-LP
increasingly verbose debug messages.
The adapter can send status and alert messages asynchronously to the
driver. These messages are printed on the system console, and are also
queued for retrieval by a management application.
SEE ALSO
kld(4), linux(4), scsi(4), kldload(8)
HISTORY
The aac driver first appeared in FreeBSD 4.3.
AUTHORS
Mike Smith <msmith@FreeBSD.org>
Scott Long <scottl@FreeBSD.org>
BUGS
This driver is not compatible with Dell controllers that have version 1.x
firmware. The firmware version is the same as the kernel version printed
in the BIOS POST and driver attach messages.
The controller is not actually paused on suspend/resume.
FreeBSD 14.0-RELEASE-p11 July 10, 2009 FreeBSD 14.0-RELEASE-p11