FreeBSD manual
download PDF document: dtsec.4.pdf
DTSEC(4) FreeBSD Kernel Interfaces Manual DTSEC(4)
NAME
dtsec - Freescale Datapath Acceleration Architecture-based Three-Speed
Ethernet Controller device driver
SYNOPSIS
To compile this driver into the kernel, place the following lines in your
kernel configuration file:
include "dpaa/config.dpaa"
device dpaa
device miibus
DESCRIPTION
The dtsec driver provides support for the DPAA-based gigabit Ethernet
controller integrated in some of the Freescale system-on-chip devices.
The dtsec driver supports the following media types:
autoselect Enable autoselection of the media type and options
10baseT/UTP Set 10Mbps operation
100baseTX Set 100Mbps operation
1000baseT Set 1000baseT operation
The dtsec driver supports the following media options:
full-duplex Set full duplex operation
The dtsec driver supports two operating modes:
Regular Normal mode, utilizing the full datapath
acceleration, Buffer Manager, and Queue Manager.
Independent Runs disconnected from the Buffer Manager and Queue
Manager.
HARDWARE
Gigabit Ethernet controllers built into the following Freescale system-
on-chip devices are known to work with the dtsec driver:
o P2041, P3041
o P5010, P5020
Additionally, the following devices are expected to work, but are
untested:
o P4080, P4040
o P5040
SEE ALSO
altq(4), arp(4), miibus(4), netintro(4), ng_ether(4), ifconfig(8)
HISTORY
The dtsec device driver first appeared in FreeBSD 11.0.
AUTHORS