FreeBSD manual
download PDF document: superio.4.pdf
SUPERIO(4) FreeBSD Kernel Interfaces Manual SUPERIO(4)
NAME
superio - Super I/O controller and bus driver
SYNOPSIS
To compile this driver into the kernel, place the following line in your
kernel configuration file:
device superio
Alternatively, to load the driver as a module at boot time, place the
following line in loader.conf(5):
superio_load="YES"
DESCRIPTION
Super I/O is an I/O controller that combines various low-bandwidth
devices that can be functionally unrelated otherwise. A typical Super
I/O can contain devices such as
o a floppy disk controller
o a parallel port
o a serial port
o a PS/2 mouse and keyboard controller
o a hardware monitoring controller
o a watchdog timer
o a controller for general purpose input-output
The superio driver provides support for devices residing in the Super I/O
controller that can only be accessed or discovered using the controller's
interface. Some of the Super I/O devices have standardized interfaces.
Such devices either use well-known legacy resources or they are
advertised via ACPI or both. They can be configured either using ISA bus
hints or they are auto-configured by acpi(4). The superio driver is not
designed to interact with that kind of devices. They can be handled by
their respective drivers without any knowledge of the Super I/O
specifics. For instance, fdc(4) provides access to the floppy disk
controller.
There are other Super I/O devices that do not have any standardized
interface. Drivers for those devices can be written using facilities of
the superio driver.
The driver itself attaches to the ISA bus as all supported controllers
are accessed via LPC I/O ports.
The superio driver is unusual as it is both a controller driver for a
variety of Super I/O controllers and a bus driver for supported devices
in those controllers.
HARDWARE
The superio driver supports a multitude of Super I/O controllers produced
by Nuvoton, formerly known as Winbond, and ITE, namely:
o Fintek F81803
o Fintek F81865
o Nuvoton NCT5104D/NCT6102D/NCT6106D rev. A and B+
o Nuvoton NCT5585D
o Nuvoton NCT6795
o Nuvoton NCT6796D-E
o Winbond 83627HF/F/HG/G/S/THF/EHF/DHG/UHG/DHG-P
o Winbond 83637HF
o Winbond 83667HG/HG-B
o Winbond 83687THF
o Winbond 83697HF/UG
SEE ALSO
superio(9)
HISTORY
The superio driver was written by Andriy Gapon <avg@FreeBSD.org>.
FreeBSD 14.0-RELEASE-p11 October 11, 2019 FreeBSD 14.0-RELEASE-p11