• Start
• Documentation
  • PostgreSQL
  • mnoGoSearch
  • Apache 2.4
  • FreeBSD handbook
  • FreeBSD Manual
  • FreeBSD Source
• Tools
• Search
• Protected Area

plain

FreeBSD manual

keyword 1 2 3 4 5 6 7 8 9 n l

download PDF document: cpucontrol.8.pdf

CPUCONTROL(8) FreeBSD System Manager's Manual CPUCONTROL(8)
NAME cpucontrol - control utility for the cpuctl(4) device
SYNOPSIS cpucontrol [-v] -m msr device cpucontrol [-v] -m msr=value device cpucontrol [-v] -m msr&=mask device cpucontrol [-v] -m msr|=mask device cpucontrol [-v] -i level device cpucontrol [-v] -i level,level_type device cpucontrol [-vn] [-d datadir] -u device cpucontrol -e device
DESCRIPTION The cpucontrol utility can be used to read and write arbitrary machine- specific CPU registers via the cpuctl(4) special device. It can also be used to apply CPU firmware updates.
The following options are available:
-d datadir Directory paths where to look for microcode images. The option can be specified multiple times. The paths are added in order of the options appearance on the command line, default directories are appended after the user-supplied paths.
-n Do not look for the microcode images in the standard directories. Currently standard directory to look for the microcode update files is /usr/local/share/cpucontrol.
-m msr Show value of the specified MSR. MSR register number should be given as a hexadecimal number. The high word is printed first, then the low word is printed second.
-m msr=value Store the value in the specified MSR register. The value argument can be prefixed with ~ operator. In this case the inverted value of argument will be stored in the register.
-m msr&=mask Store the result of bitwise AND operation between mask and the current MSR value in the MSR register. The mask argument can be prefixed with ~ operator. In this case the inverted value of mask will be used.
-m msr|=mask Store the result of bitwise OR operation between mask and the current MSR value in the MSR register. The mask argument can be prefixed with ~ operator. In this case the inverted value of mask will be used.
-i level Retrieve CPUID info. Level should be given as a hex number.
-i level,level_type Retrieve CPUID info. Level and level_type should be given as hex numbers. applied which changes information reported by the CPUID instruction.
Only execute the -e command after the microcode update was applied to all CPUs in the system. The kernel does not operate correctly if the features of processors are not identical.
-v Increase the verbosity level.
-h Show help message.
EXIT STATUS The cpucontrol utility exits 0 on success, and >0 if an error occurs.
EXAMPLES The command
"cpucontrol -m 0x10 /dev/cpuctl0"
will read the contents of TSC MSR from CPU 0.
To set the CPU 0 TSC MSR register value to 0x1 issue
"cpucontrol -m 0x10=0x1 /dev/cpuctl0".
The following command will clear the second bit of TSC register:
"cpucontrol -m 0x10&=~0x02 /dev/cpuctl0".
The following command will set the forth and second bit of TSC register:
"cpucontrol -m 0x10|=0x0a /dev/cpuctl0".
The command
"cpucontrol -i 0x1 /dev/cpuctl1"
will retrieve the CPUID level 0x1 from CPU 1.
To perform firmware updates on CPU 0 from images located at /usr/local/share/cpuctl use the following command:
"cpucontrol -nd /usr/local/share/cpuctl -u /dev/cpuctl0"
SEE ALSO cpuctl(4)
HISTORY The cpucontrol utility first appeared in FreeBSD 7.2.
AUTHORS The cpucontrol utility and this manual page was written by Stanislav Sedov <stas@FreeBSD.org>.
FreeBSD 14.0-RELEASE-p6 January 5, 2018 FreeBSD 14.0-RELEASE-p6