FreeBSD manual
download PDF document: graid.8.pdf
GRAID(8) FreeBSD System Manager's Manual GRAID(8)
NAME
graid - control utility for software RAID devices
SYNOPSIS
graid label [-f] [-o fmtopt] [-S size] [-s strip] format label level
prov ...
graid add [-f] [-S size] [-s strip] name label level
graid delete [-f] name [label | num]
graid insert name prov ...
graid remove name prov ...
graid fail name prov ...
graid stop [-fv] name ...
graid list
graid status
graid load
graid unload
DESCRIPTION
The graid utility is used to manage software RAID configurations,
supported by the GEOM RAID class. GEOM RAID class uses on-disk metadata
to provide access to software-RAID volumes defined by different RAID
BIOSes. Depending on RAID BIOS type and its metadata format, different
subsets of configurations and features are supported. To allow booting
from RAID volume, the metadata format should match the RAID BIOS type and
its capabilities. To guarantee that these match, it is recommended to
create volumes via the RAID BIOS interface, while experienced users are
free to do it using this utility.
The first argument to graid indicates an action to be performed:
label Create an array with single volume. The format argument
specifies the on-disk metadata format to use for this array,
such as "Intel". The label argument specifies the label of the
created volume. The level argument specifies the RAID level of
the created volume, such as: "RAID0", "RAID1", etc. The
subsequent list enumerates providers to use as array components.
The special name "NONE" can be used to reserve space for absent
disks. The order of components can be important, depending on
specific RAID level and metadata format.
Additional options include:
-f Enforce specified configuration creation if it is
officially unsupported, but technically can be
created.
-o fmtopt Specifies metadata format options.
-S size Use size bytes on each component for this volume.
Should be used if several volumes per array are
planned, or if smaller components going to be
inserted later. Defaults to size of the smallest
component.
-s strip Specifies strip size in bytes. Defaults to 131072.
add Create another volume on the existing array. The name argument
Additional options include:
-f
Delete volume(s) even if it is still open.
insert Insert specified provider(s) into specified array instead of the
first missing or failed components. If there are no such
components, mark disk(s) as spare.
remove Remove the specified provider(s) from the specified array and
erase metadata. If there are spare disks present, the removed
disk(s) will be replaced by spares.
fail Mark the given disks(s) as failed, removing from active use
unless absolutely necessary due to exhausted redundancy. If
there are spare disks present - failed disk(s) will be replaced
with one of them.
stop Stop the given array. The metadata will not be erased.
Additional options include:
-f
Stop the given array even if some of its volumes are opened.
list See geom(8).
status See geom(8).
load See geom(8).
unload See geom(8).
Additional options include:
-v
Be more verbose.
SUPPORTED METADATA FORMATS
The GEOM RAID class follows a modular design, allowing different metadata
formats to be used. Support is currently implemented for the following
formats:
DDF The format defined by the SNIA Common RAID Disk Data Format v2.0
specification. Used by some Adaptec RAID BIOSes and some hardware
RAID controllers. Because of high format flexibility different
implementations support different set of features and have
different on-disk metadata layouts. To provide compatibility, the
GEOM RAID class mimics capabilities of the first detected DDF
array. Respecting that, it may support different number of disks
per volume, volumes per array, partitions per disk, etc. The
following configurations are supported: RAID0 (2+ disks), RAID1
(2+ disks), RAID1E (3+ disks), RAID3 (3+ disks), RAID4 (3+ disks),
RAID5 (3+ disks), RAID5E (4+ disks), RAID5EE (4+ disks), RAID5R
(3+ disks), RAID6 (4+ disks), RAIDMDF (4+ disks), RAID10 (4+
disks), SINGLE (1 disk), CONCAT (2+ disks).
Format supports two options "BE" and "LE", that mean big-endian
RAID1 (3+ disks), RAID1E (3+ disks), RAID10 (6+ disks).
JMicron
The format used by JMicron RAID BIOS. Supports one volume per
array. Supports configurations: RAID0 (2+ disks), RAID1 (2
disks), RAID10 (4 disks), CONCAT (2+ disks). Configurations not
supported by JMicron RAID BIOS, but enforceable on your own risk:
RAID1 (3+ disks), RAID1E (3+ disks), RAID10 (6+ disks), RAID5 (3+
disks).
NVIDIA
The format used by NVIDIA MediaShield RAID BIOS. Supports one
volume per array. Supports configurations: RAID0 (2+ disks),
RAID1 (2 disks), RAID5 (3+ disks), RAID10 (4+ disks), SINGLE (1
disk), CONCAT (2+ disks). Configurations not supported by NVIDIA
MediaShield RAID BIOS, but enforceable on your own risk: RAID1 (3+
disks).
Promise
The format used by Promise and AMD/ATI RAID BIOSes. Supports
multiple volumes per array. Each disk can be split to be used by
up to two arbitrary volumes. Supports configurations: RAID0 (2+
disks), RAID1 (2 disks), RAID5 (3+ disks), RAID10 (4 disks),
SINGLE (1 disk), CONCAT (2+ disks). Configurations not supported
by RAID BIOSes, but enforceable on your own risk: RAID1 (3+
disks), RAID10 (6+ disks).
SiI The format used by SiliconImage RAID BIOS. Supports one volume
per array. Supports configurations: RAID0 (2+ disks), RAID1 (2
disks), RAID5 (3+ disks), RAID10 (4 disks), SINGLE (1 disk),
CONCAT (2+ disks). Configurations not supported by SiliconImage
RAID BIOS, but enforceable on your own risk: RAID1 (3+ disks),
RAID10 (6+ disks).
SUPPORTED RAID LEVELS
The GEOM RAID class follows a modular design, allowing different RAID
levels to be used. Full support for the following RAID levels is
currently implemented: RAID0, RAID1, RAID1E, RAID10, SINGLE, CONCAT. The
following RAID levels supported as read-only for volumes in optimal state
(without using redundancy): RAID4, RAID5, RAID5E, RAID5EE, RAID5R, RAID6,
RAIDMDF.
RAID LEVEL MIGRATION
The GEOM RAID class has no support for RAID level migration, allowed by
some metadata formats. If you started migration using BIOS or in some
other way, make sure to complete it there. Do not run GEOM RAID class on
migrating volumes under pain of possible data corruption!
2TiB BARRIERS
NVIDIA metadata format does not support volumes above 2TiB.
SYSCTL VARIABLES
The following sysctl(8) variable can be used to control the behavior of
the RAID GEOM class.
kern.geom.raid.aggressive_spare: 0
Use any disks without metadata connected to controllers of the
vendor matching to volume metadata format as spare. Use it with
much care to not lose data if connecting unrelated disk!
kern.geom.raid.enable: 1
Enable on-disk metadata taste.
kern.geom.raid.idle_threshold: 1000000
Time in microseconds to consider a volume idle for rebuild
purposes.
kern.geom.raid.name_format: 0
Providers name format: 0 -- raid/r{num}, 1 -- raid/{label}.
kern.geom.raid.read_err_thresh: 10
Number of read errors equated to disk failure. Write errors are
always considered as disk failures.
kern.geom.raid.start_timeout: 30
Time to wait for missing array components on startup.
kern.geom.raid.X.enable: 1
Enable taste for specific metadata or transformation module.
EXIT STATUS
Exit status is 0 on success, and non-zero if the command fails.
SEE ALSO
geom(4), geom(8), gvinum(8)
HISTORY
The graid utility appeared in FreeBSD 9.0.
AUTHORS
Alexander Motin <mav@FreeBSD.org>
M. Warner Losh <imp@FreeBSD.org>
FreeBSD 14.0-RELEASE-p11 April 4, 2013 FreeBSD 14.0-RELEASE-p11