FreeBSD manual
download PDF document: ntp-keygen.8.pdf
NTP_KEYGEN(8) FreeBSD System Manager's Manual (user) NTP_KEYGEN(8)
NAME
ntp-keygen - Create a NTP host key
SYNOPSIS
ntp-keygen [-flags] [-flag [value]] [--option-name[[=| ]value]]
All arguments must be options.
DESCRIPTION
This program generates cryptographic data files used by the NTPv4
authentication and identification schemes. It can generate message
digest keys used in symmetric key cryptography and, if the OpenSSL
software library has been installed, it can generate host keys, signing
keys, certificates, and identity keys and parameters used in Autokey
public key cryptography. These files are used for cookie encryption,
digital signature, and challenge/response identification algorithms
compatible with the Internet standard security infrastructure.
The message digest symmetric keys file is generated in a format
compatible with NTPv3. All other files are in PEM-encoded printable
ASCII format, so they can be embedded as MIME attachments in email to
other sites and certificate authorities. By default, files are not
encrypted.
When used to generate message digest symmetric keys, the program produces
a file containing ten pseudo-random printable ASCII strings suitable for
the MD5 message digest algorithm included in the distribution. If the
OpenSSL library is installed, it produces an additional ten hex-encoded
random bit strings suitable for SHA1, AES-128-CMAC, and other message
digest algorithms. The message digest symmetric keys file must be
distributed and stored using secure means beyond the scope of NTP itself.
Besides the keys used for ordinary NTP associations, additional keys can
be defined as passwords for the ntpq(8) and ntpdc(8) utility programs.
The remaining generated files are compatible with other OpenSSL
applications and other Public Key Infrastructure (PKI) resources.
Certificates generated by this program are compatible with extant
industry practice, although some users might find the interpretation of
X509v3 extension fields somewhat liberal. However, the identity keys are
probably not compatible with anything other than Autokey.
Some files used by this program are encrypted using a private password.
The -p option specifies the read password for local encrypted files and
the -q option the write password for encrypted files sent to remote
sites. If no password is specified, the host name returned by the Unix
hostname(1) command, normally the DNS name of the host, is used as the
the default read password, for convenience. The ntp-keygen program
prompts for the password if it reads an encrypted file and the password
is missing or incorrect. If an encrypted file is read successfully and
no write password is specified, the read password is used as the write
password by default.
The pw option of the crypto ntpd(8) configuration command specifies the
read password for previously encrypted local files. This must match the
local read password used by this program. If not specified, the host
name is used. Thus, if files are generated by this program without an
explicit password, they can be read back by ntpd(8) without specifying an
installed in /etc. Other files and links are usually installed in
/usr/local/etc, which is normally in a shared filesystem in NFS-mounted
networks and cannot be changed by shared clients. In these cases, NFS
clients can specify the files in another directory such as /etc using the
keysdir ntpd(8) configuration file command.
This program directs commentary and error messages to the standard error
stream stderr and remote files to the standard output stream stdout where
they can be piped to other applications or redirected to files. The
names used for generated files and links all begin with the string
ntpkey* and include the file type, generating host and filestamp, as
described in the Cryptographic Data Files section below.
Running the Program
The safest way to run the ntp-keygen program is logged in directly as
root. The recommended procedure is change to the keys directory, usually
/usr/local/etc, then run the program.
To test and gain experience with Autokey concepts, log in as root and
change to the keys directory, usually /usr/local/etc. When run for the
first time, or if all files with names beginning with ntpkey* have been
removed, use the ntp-keygen command without arguments to generate a
default RSA host key and matching RSA-MD5 certificate file with
expiration date one year hence, which is all that is necessary in many
cases. The program also generates soft links from the generic names to
the respective files. If run again without options, the program uses the
existing keys and parameters and generates a new certificate file with
new expiration date one year hence, and soft link.
The host key is used to encrypt the cookie when required and so must be
RSA type. By default, the host key is also the sign key used to encrypt
signatures. When necessary, a different sign key can be specified and
this can be either RSA or DSA type. By default, the message digest type
is MD5, but any combination of sign key type and message digest type
supported by the OpenSSL library can be specified, including those using
the AES128CMAC, MD2, MD5, MDC2, SHA, SHA1 and RIPE160 message digest
algorithms. However, the scheme specified in the certificate must be
compatible with the sign key. Certificates using any digest algorithm
are compatible with RSA sign keys; however, only SHA and SHA1
certificates are compatible with DSA sign keys.
Private/public key files and certificates are compatible with other
OpenSSL applications and very likely other libraries as well.
Certificates or certificate requests derived from them should be
compatible with extant industry practice, although some users might find
the interpretation of X509v3 extension fields somewhat liberal. However,
the identification parameter files, although encoded as the other files,
are probably not compatible with anything other than Autokey.
Running the program as other than root and using the Unix su(1) command
to assume root may not work properly, since by default the OpenSSL
library looks for the random seed file .rnd in the user home directory.
However, there should be only one .rnd, most conveniently in the root
directory, so it is convenient to define the RANDFILE environment
variable used by the OpenSSL library as the path to .rnd.
Installing the keys as root might not work in NFS-mounted shared file
systems, as NFS clients may not be able to write to the shared keys
directory, even as root. In this case, NFS clients can specify the files
other hosts; however, in such cases files should always be encrypted.
The subject name and trusted name default to the hostname of the host
generating the files, but can be changed by command line options. It is
convenient to designate the owner name and trusted name as the subject
and issuer fields, respectively, of the certificate. The owner name is
also used for the host and sign key files, while the trusted name is used
for the identity files.
All files are installed by default in the keys directory /usr/local/etc,
which is normally in a shared filesystem in NFS-mounted networks. The
actual location of the keys directory and each file can be overridden by
configuration commands, but this is not recommended. Normally, the files
for each host are generated by that host and used only by that host,
although exceptions exist as noted later on this page.
Normally, files containing private values, including the host key, sign
key and identification parameters, are permitted root read/write-only;
while others containing public values are permitted world readable.
Alternatively, files containing private values can be encrypted and these
files permitted world readable, which simplifies maintenance in shared
file systems. Since uniqueness is insured by the hostname and filestamp
file name extensions, the files for an NTP server and dependent clients
can all be installed in the same shared directory.
The recommended practice is to keep the file name extensions when
installing a file and to install a soft link from the generic names
specified elsewhere on this page to the generated files. This allows new
file generations to be activated simply by changing the link. If a link
is present, ntpd(8) follows it to the file name to extract the filestamp.
If a link is not present, ntpd(8) extracts the filestamp from the file
itself. This allows clients to verify that the file and generation times
are always current. The ntp-keygen program uses the same filestamp
extension for all files generated at one time, so each generation is
distinct and can be readily recognized in monitoring data.
Run the command on as many hosts as necessary. Designate one of them as
the trusted host (TH) using ntp-keygen with the -T option and configure
it to synchronize from reliable Internet servers. Then configure the
other hosts to synchronize to the TH directly or indirectly. A
certificate trail is created when Autokey asks the immediately ascendant
host towards the TH to sign its certificate, which is then provided to
the immediately descendant host on request. All group hosts should have
acyclic certificate trails ending on the TH.
The host key is used to encrypt the cookie when required and so must be
RSA type. By default, the host key is also the sign key used to encrypt
signatures. A different sign key can be assigned using the -S option and
this can be either RSA or DSA type. By default, the signature message
digest type is MD5, but any combination of sign key type and message
digest type supported by the OpenSSL library can be specified using the
-c option.
The rules say cryptographic media should be generated with proventic
filestamps, which means the host should already be synchronized before
this program is run. This of course creates a chicken-and-egg problem
when the host is started for the first time. Accordingly, the host time
should be set by some other means, such as eyeball-and-wristwatch, at
least so that the certificate lifetime is within the current year. After
that and when the host is synchronized to a proventic source, the
string returned by the Unix hostname(1) command, and filestamp is the NTP
seconds when the file was generated, in decimal digits. This both
guarantees uniqueness and simplifies maintenance procedures, since all
files can be quickly removed by a rm ntpkey* command or all files
generated at a specific time can be removed by a rm *filestamp command.
To further reduce the risk of misconfiguration, the first two lines of a
file contain the file name and generation date and time as comments.
Trusted Hosts and Groups
Each cryptographic configuration involves selection of a signature scheme
and identification scheme, called a cryptotype, as explained in the
Authentication Options section of ntp.conf(5). The default cryptotype
uses RSA encryption, MD5 message digest and TC identification. First,
configure a NTP subnet including one or more low-stratum trusted hosts
from which all other hosts derive synchronization directly or indirectly.
Trusted hosts have trusted certificates; all other hosts have nontrusted
certificates. These hosts will automatically and dynamically build
authoritative certificate trails to one or more trusted hosts. A trusted
group is the set of all hosts that have, directly or indirectly, a
certificate trail ending at a trusted host. The trail is defined by
static configuration file entries or dynamic means described on the
Automatic NTP Configuration Options section of ntp.conf(5).
On each trusted host as root, change to the keys directory. To insure a
fresh fileset, remove all ntpkey files. Then run ntp-keygen -T to
generate keys and a trusted certificate. On all other hosts do the same,
but leave off the -T flag to generate keys and nontrusted certificates.
When complete, start the NTP daemons beginning at the lowest stratum and
working up the tree. It may take some time for Autokey to instantiate
the certificate trails throughout the subnet, but setting up the
environment is completely automatic.
If it is necessary to use a different sign key or different
digest/signature scheme than the default, run ntp-keygen with the -S type
option, where type is either RSA or DSA. The most frequent need to do
this is when a DSA-signed certificate is used. If it is necessary to use
a different certificate scheme than the default, run ntp-keygen with the
-c scheme option and selected scheme as needed. If ntp-keygen is run
again without these options, it generates a new certificate using the
same scheme and sign key, and soft link.
After setting up the environment it is advisable to update certificates
from time to time, if only to extend the validity interval. Simply run
ntp-keygen with the same flags as before to generate new certificates
using existing keys, and soft links. However, if the host or sign key is
changed, ntpd(8) should be restarted. When ntpd(8) is restarted, it
loads any new files and restarts the protocol. Other dependent hosts
will continue as usual until signatures are refreshed, at which time the
protocol is restarted.
Identity Schemes
As mentioned on the Autonomous Authentication page, the default TC
identity scheme is vulnerable to a middleman attack. However, there are
more secure identity schemes available, including PC, IFF, GQ and MV
schemes described below. These schemes are based on a TA, one or more
trusted hosts and some number of nontrusted hosts. Trusted hosts prove
identity using values provided by the TA, while the remaining hosts prove
identity using values provided by a trusted host and certificate trails
that end on that host. The name of a trusted host is also the name of
hosts that operate as both server and client have parameter files that
contain both server and client keys. Hosts that operate only as clients
have key files that contain only client keys.
The PC scheme supports only one trusted host in the group. On trusted
host alice run ntp-keygen -P -p password to generate the host key file
ntpkey_ RSA key_alice. filestamp and trusted private certificate file
ntpkey_ RSA-MD5 _ cert_alice. filestamp, and soft links. Copy both files
to all group hosts; they replace the files which would be generated in
other schemes. On each host bob install a soft link from the generic
name ntpkey_host_bob to the host key file and soft link ntpkey_cert_bob
to the private certificate file. Note the generic links are on bob, but
point to files generated by trusted host alice. In this scheme it is not
possible to refresh either the keys or certificates without copying them
to all other hosts in the group, and recreating the soft links.
For the IFF scheme proceed as in the TC scheme to generate keys and
certificates for all group hosts, then for every trusted host in the
group, generate the IFF parameter file. On trusted host alice run
ntp-keygen -T -I -p password to produce her parameter file
ntpkey_IFFpar_alice.filestamp, which includes both server and client
keys. Copy this file to all group hosts that operate as both servers and
clients and install a soft link from the generic ntpkey_iff_alice to this
file. If there are no hosts restricted to operate only as clients, there
is nothing further to do. As the IFF scheme is independent of keys and
certificates, these files can be refreshed as needed.
If a rogue client has the parameter file, it could masquerade as a
legitimate server and present a middleman threat. To eliminate this
threat, the client keys can be extracted from the parameter file and
distributed to all restricted clients. After generating the parameter
file, on alice run ntp-keygen -e and pipe the output to a file or email
program. Copy or email this file to all restricted clients. On these
clients install a soft link from the generic ntpkey_iff_alice to this
file. To further protect the integrity of the keys, each file can be
encrypted with a secret password.
For the GQ scheme proceed as in the TC scheme to generate keys and
certificates for all group hosts, then for every trusted host in the
group, generate the IFF parameter file. On trusted host alice run
ntp-keygen -T -G -p password to produce her parameter file
ntpkey_GQpar_alice.filestamp, which includes both server and client keys.
Copy this file to all group hosts and install a soft link from the
generic ntpkey_gq_alice to this file. In addition, on each host bob
install a soft link from generic ntpkey_gq_bob to this file. As the GQ
scheme updates the GQ parameters file and certificate at the same time,
keys and certificates can be regenerated as needed.
For the MV scheme, proceed as in the TC scheme to generate keys and
certificates for all group hosts. For illustration assume trish is the
TA, alice one of several trusted hosts and bob one of her clients. On TA
trish run ntp-keygen -V n -p password, where n is the number of revokable
keys (typically 5) to produce the parameter file
ntpkeys_MVpar_trish.filestamp and client key files ntpkeys_MVkeyd _
trish. filestamp where d is the key number (0 < d < n). Copy the
parameter file to alice and install a soft link from the generic
ntpkey_mv_alice to this file. Copy one of the client key files to alice
for later distribution to her clients. It does not matter which client
key file goes to alice, since they all work the same way. Alice copies
Set the number of bits in the identity modulus for generating
identity keys to modulus bits. The number of bits in the
identity modulus defaults to 256, but can be set to values from
256 to 2048 (32 to 256 octets). Use the larger moduli with
caution, as this can consume considerable computing resources and
increases the size of authenticated packets.
-c --certificate= scheme
Select certificate signature encryption/message digest scheme.
The scheme can be one of the following: RSA-MD2, RSA-MD5,
RSA-MDC2, RSA-SHA, RSA-SHA1, RSA-RIPEMD160, DSA-SHA, or DSA-SHA1.
Note that RSA schemes must be used with an RSA sign key and DSA
schemes must be used with a DSA sign key. The default without
this option is RSA-MD5. If compatibility with FIPS 140-2 is
required, either the DSA-SHA or DSA-SHA1 scheme must be used.
-C --cipher= cipher
Select the OpenSSL cipher to encrypt the files containing private
keys. The default without this option is three-key triple DES in
CBC mode, des-ede3-cbc. The openssl -h command provided with
OpenSSL displays available ciphers.
-d --debug-level
Increase debugging verbosity level. This option displays the
cryptographic data produced in eye-friendly billboards.
-D --set-debug-level= level
Set the debugging verbosity to level. This option displays the
cryptographic data produced in eye-friendly billboards.
-e --id-key
Write the IFF or GQ public parameters from the IFFkey or GQkey
client keys file previously specified as unencrypted data to the
standard output stream stdout. This is intended for automatic
key distribution by email.
-G --gq-params
Generate a new encrypted GQ parameters and key file for the
Guillou-Quisquater (GQ) identity scheme. This option is mutually
exclusive with the -I and -V options.
-H --host-key
Generate a new encrypted RSA public/private host key file.
-I --iffkey
Generate a new encrypted IFF key file for the Schnorr (IFF)
identity scheme. This option is mutually exclusive with the -G
and Fl V options.
-i --ident= group
Set the optional Autokey group name to group. This is used in
the identity scheme parameter file names of IFF, GQ, and MV
client parameters files. In that role, the default is the host
name if no group is provided. The group name, if specified using
-i or -s following an `@' character, is also used in certificate
subject and issuer names in the form host @ group and should
match the group specified via crypto ident or server ident in the
ntpd configuration file.
2048 (32 to 256 octets). Use the larger moduli with caution, as
this can consume considerable computing resources and increases
the size of authenticated packets.
-M --md5key
Generate a new symmetric keys file containing 10 MD5 keys, and if
OpenSSL is available, 10 SHA keys. An MD5 key is a string of 20
random printable ASCII characters, while a SHA key is a string of
40 random hex digits. The file can be edited using a text editor
to change the key type or key content. This option is mutually
exclusive with all other options.
-p --password= passwd
Set the password for reading and writing encrypted files to
passwd. These include the host, sign and identify key files. By
default, the password is the string returned by the Unix hostname
command.
-P --pvt-cert
Generate a new private certificate used by the PC identity
scheme. By default, the program generates public certificates.
Note: the PC identity scheme is not recommended for new
installations.
-q --export-passwd= passwd
Set the password for writing encrypted IFF, GQ and MV identity
files redirected to stdout to passwd. In effect, these files are
decrypted with the -p password, then encrypted with the -q
password. By default, the password is the string returned by the
Unix hostname command.
-s --subject-key= file ... [host] [@ group]
Specify the Autokey host name, where host is the optional host
name and group is the optional group name. The host name, and if
provided, group name are used in host @ group form as certificate
subject and issuer. Specifying -s -@ group is allowed, and
results in leaving the host name unchanged, as with -i group.
The group name, or if no group is provided, the host name are
also used in the file names of IFF, GQ, and MV identity scheme
client parameter files. If host is not specified, the default
host name is the string returned by the Unix hostname command.
-S --sign-key= [RSA | DSA]
Generate a new encrypted public/private sign key file of the
specified type. By default, the sign key is the host key and has
the same type. If compatibility with FIPS 140-2 is required, the
sign key type must be DSA.
-T --trusted-cert
Generate a trusted certificate. By default, the program
generates a non-trusted certificate.
-V --mv-params nkeys
Generate nkeys encrypted server keys and parameters for the
Mu-Varadharajan (MV) identity scheme. This option is mutually
exclusive with the -I and -G options. Note: support for this
option should be considered a work in progress.
Random Seed File
It is important to understand that entropy must be evolved for each
generation, for otherwise the random number sequence would be
predictable. Various means dependent on external events, such as
keystroke intervals, can be used to do this and some systems have
built-in entropy sources. Suitable means are described in the OpenSSL
software documentation, but are outside the scope of this page.
The entropy seed used by the OpenSSL library is contained in a file,
usually called .rnd, which must be available when starting the NTP daemon
or the ntp-keygen program. The NTP daemon will first look for the file
using the path specified by the randfile subcommand of the crypto
configuration command. If not specified in this way, or when starting
the ntp-keygen program, the OpenSSL library will look for the file using
the path specified by the RANDFILE environment variable in the user home
directory, whether root or some other user. If the RANDFILE environment
variable is not present, the library will look for the .rnd file in the
user home directory. Since both the ntp-keygen program and ntpd(8)
daemon must run as root, the logical place to put this file is in /.rnd
or /root/.rnd. If the file is not available or cannot be written, the
daemon exits with a message to the system log and the program exits with
a suitable error message.
Cryptographic Data Files
All file formats begin with two nonencrypted lines. The first line
contains the file name, including the generated host name and filestamp,
in the format ntpkey_key _ name. filestamp, where key is the key or
parameter type, name is the host or group name and filestamp is the
filestamp (NTP seconds) when the file was created. By convention, key
names in generated file names include both upper and lower case
characters, while key names in generated link names include only lower
case characters. The filestamp is not used in generated link names. The
second line contains the datestamp in conventional Unix date format.
Lines beginning with `#' are considered comments and ignored by the
ntp-keygen program and ntpd(8) daemon.
The remainder of the file contains cryptographic data, encoded first
using ASN.1 rules, then encrypted if necessary, and finally written in
PEM-encoded printable ASCII text, preceded and followed by MIME content
identifier lines.
The format of the symmetric keys file, ordinarily named ntp.keys, is
somewhat different than the other files in the interest of backward
compatibility. Ordinarily, the file is generated by this program, but it
can be constructed and edited using an ordinary text editor.
# ntpkey_MD5key_bk.ntp.org.3595864945
# Thu Dec 12 19:22:25 2013
1 MD5 L";Nw<`.I<f4U0)247"i # MD5 key
2 MD5 &>l0%XXK9O'51VwV<xq~ # MD5 key
3 MD5 lb4zLW~d^!K:]RsD'qb6 # MD5 key
4 MD5 Yue:tL[+vR)M`n~bY,'? # MD5 key
5 MD5 B;fx'Kgr/&4ZTbL6=RxA # MD5 key
6 MD5 4eYwa`o}3i@@V@..R9!l # MD5 key
7 MD5 `A.([h+;wTQ|xfi%Sn_! # MD5 key
8 MD5 45:V,r4]l6y^JH6"Sh?F # MD5 key
9 MD5 3-5vcn*6l29DS?Xdsg)* # MD5 key
10 MD5 2late4Me # MD5 key
11 SHA1 a27872d3030a9025b8446c751b4551a7629af65c # SHA1 key
19 RIPEMD160 77ca332cafb30e3cafb174dcd5b80ded7ba9b3d2 # RIPEMD160 key
20 AES128CMAC f92ff73eee86c1e7dc638d6489a04e4e555af878 # AES128CMAC key
Figure 1. Typical Symmetric Key File
Figure 1 shows a typical symmetric keys file used by the reference
implementation. Following the header the keys are entered one per line
in the format
keyno type key
where keyno is a positive integer in the range 1-65535; type is the key
type for the message digest algorithm, which in the absence of the
OpenSSL library must be MD5 to designate the MD5 message digest
algorithm; if the OpenSSL library is installed, the key type can be any
message digest algorithm supported by that library; however, if
compatibility with FIPS 140-2 is required, the key type must be either
SHA or SHA1; key is the key itself, which is a printable ASCII string 20
characters or less in length: each character is chosen from the 93
printable characters in the range 0x21 through 0x7e ( `'! through `~' )
excluding space and the `#' character, and terminated by whitespace or a
`#' character. An OpenSSL key consists of a hex-encoded ASCII string of
40 characters, which is truncated as necessary.
Note that the keys used by the ntpq(8) and ntpdc(8) programs are checked
against passwords requested by the programs and entered by hand, so it is
generally appropriate to specify these keys in human readable ASCII
format.
The ntp-keygen program generates a symmetric keys file
ntpkey_MD5key_hostname.filestamp. Since the file contains private shared
keys, it should be visible only to root and distributed by secure means
to other subnet hosts. The NTP daemon loads the file ntp.keys, so
ntp-keygen installs a soft link from this name to the generated file.
Subsequently, similar soft links must be installed by manual or automated
means on the other subnet hosts. While this file is not used with the
Autokey Version 2 protocol, it is needed to authenticate some remote
configuration commands used by the ntpq(8) and ntpdc(8) utilities.
OPTIONS
-b imbits, --imbits=imbits
identity modulus bits. This option takes an integer number as
its argument. The value of imbits is constrained to being:
in the range 256 through 2048
The number of bits in the identity modulus. The default is 256.
-c scheme, --certificate=scheme
certificate scheme.
scheme is one of RSA-MD2, RSA-MD5, RSA-MDC2, RSA-SHA, RSA-SHA1,
RSA-RIPEMD160, DSA-SHA, or DSA-SHA1.
Select the certificate signature encryption/message digest
scheme. Note that RSA schemes must be used with a RSA sign key
and DSA schemes must be used with a DSA sign key. The default
without this option is RSA-MD5.
-C cipher, --cipher=cipher
privatekey cipher.
Select the cipher which is used to encrypt the files containing
-D number, --set-debug-level=number
Set the debug verbosity level. This option may appear an
unlimited number of times. This option takes an integer number
as its argument.
-e, --id-key
Write IFF or GQ identity keys.
Write the public parameters from the IFF or GQ client keys to the
standard output. This is intended for automatic key distribution
by email.
-G, --gq-params
Generate GQ parameters and keys.
Generate parameters and keys for the GQ identification scheme,
obsoleting any that may exist.
-H, --host-key
generate RSA host key.
Generate new host keys, obsoleting any that may exist.
-I, --iffkey
generate IFF parameters.
Generate parameters for the IFF identification scheme, obsoleting
any that may exist.
-i group, --ident=group
set Autokey group name.
Set the optional Autokey group name to name. This is used in the
file name of IFF, GQ, and MV client parameters files. In that
role, the default is the host name if this option is not
provided. The group name, if specified using -i/--ident or using
-s/--subject-name following an '@' character, is also a part of
the self-signed host certificate subject and issuer names in the
form host@group and should match the 'crypto ident' or 'server
ident' configuration in the ntpd configuration file.
-l lifetime, --lifetime=lifetime
set certificate lifetime. This option takes an integer number as
its argument.
Set the certificate expiration to lifetime days from now.
-m modulus, --modulus=modulus
prime modulus. This option takes an integer number as its
argument. The value of modulus is constrained to being:
in the range 256 through 2048
The number of bits in the prime modulus. The default is 512.
-M, --md5key
generate symmetric keys.
generates public certificates.
-p passwd, --password=passwd
local private password.
Local files containing private data are encrypted with the
DES-CBC algorithm and the specified password. The same password
must be specified to the local ntpd via the "crypto pw password"
configuration command. The default password is the local
hostname.
-q passwd, --export-passwd=passwd
export IFF or GQ group keys with password.
Export IFF or GQ identity group keys to the standard output,
encrypted with the DES-CBC algorithm and the specified password.
The same password must be specified to the remote ntpd via the
"crypto pw password" configuration command. See also the option
--id-key (-e) for unencrypted exports.
-s host@group, --subject-name=host@group
set host and optionally group name.
Set the Autokey host name, and optionally, group name specified
following an '@' character. The host name is used in the file
name of generated host and signing certificates, without the
group name. The host name, and if provided, group name are used
in host@group form for the host certificate subject and issuer
fields. Specifying '-s @group' is allowed, and results in
leaving the host name unchanged while appending @group to the
subject and issuer fields, as with -i group. The group name, or
if not provided, the host name are also used in the file names of
IFF, GQ, and MV client parameter files.
-S sign, --sign-key=sign
generate sign key (RSA or DSA).
Generate a new sign key of the designated type, obsoleting any
that may exist. By default, the program uses the host key as the
sign key.
-T, --trusted-cert
trusted certificate (TC scheme).
Generate a trusted certificate. By default, the program
generates a non-trusted certificate.
-V num, --mv-params=num
generate <num> MV parameters. This option takes an integer
number as its argument.
Generate parameters and keys for the Mu-Varadharajan (MV)
identification scheme.
-v num, --mv-keys=num
update <num> MV keys. This option takes an integer number as its
argument.
This option has not been fully documented.
-> [cfgfile], --save-opts [=cfgfile]
Save the option state to cfgfile. The default is the last
configuration file listed in the OPTION PRESETS section, below.
The command will exit after updating the config file.
-< cfgfile, --load-opts=cfgfile, --no-load-opts
Load options from cfgfile. The no-load-opts form will disable
the loading of earlier config/rc/ini files. --no-load-opts is
handled early, out of order.
--version [{v|c|n}]
Output version of program and exit. The default mode is `v', a
simple version. The `c' mode will print copyright information
and `n' will print the full copyright notice.
OPTION PRESETS
Any option that is not marked as not presettable may be preset by loading
values from configuration ("RC" or ".INI") file(s) and values from
environment variables named:
NTP_KEYGEN_<option-name> or NTP_KEYGEN
The environmental presets take precedence (are processed later than) the
configuration files. The homerc files are "$HOME", and ".". If any of
these are directories, then the file .ntprc is searched for within those
directories.
USAGE
ENVIRONMENT
See OPTION PRESETS for configuration environment variables.
FILES
See OPTION PRESETS for configuration files.
EXIT STATUS
One of the following exit values will be returned:
0 (EXIT_SUCCESS)
Successful program execution.
1 (EXIT_FAILURE)
The operation failed or the command syntax was not valid.
66 (EX_NOINPUT)
A specified configuration file could not be loaded.
70 (EX_SOFTWARE)
libopts had an internal operational error. Please report it to
autogen-users@lists.sourceforge.net. Thank you.
AUTHORS
The University of Delaware and Network Time Foundation
COPYRIGHT
Copyright (C) 1992-2017 The University of Delaware and Network Time
Foundation all rights reserved. This program is released under the terms
of the NTP license, <http://ntp.org/license>.
BUGS
It can take quite a while to generate some cryptographic values.
This manual page was AutoGen-erated from the ntp-keygen option
definitions.
FreeBSD 14.0-RELEASE-p11 August 14 2018 FreeBSD 14.0-RELEASE-p11