FreeBSD manual
download PDF document: rman_manage_region.9.pdf
RMAN(9) FreeBSD Kernel Developer's Manual RMAN(9)
NAME
rman, rman_activate_resource, rman_adjust_resource,
rman_deactivate_resource, rman_fini, rman_init, rman_init_from_resource,
rman_is_region_manager, rman_manage_region, rman_first_free_region,
rman_last_free_region, rman_release_resource, rman_reserve_resource,
rman_reserve_resource_bound, rman_make_alignment_flags, rman_get_start,
rman_get_end, rman_get_device, rman_get_size, rman_get_flags,
rman_set_mapping, rman_get_mapping, rman_set_virtual, rman_get_virtual,
rman_set_bustag, rman_get_bustag, rman_set_bushandle, rman_get_bushandle,
rman_set_rid, rman_get_rid - resource management functions
SYNOPSIS
#include <sys/types.h>
#include <sys/rman.h>
int
rman_activate_resource(struct resource *r);
int
rman_adjust_resource(struct resource *r, rman_res_t start,
rman_res_t end);
int
rman_deactivate_resource(struct resource *r);
int
rman_fini(struct rman *rm);
int
rman_init(struct rman *rm);
int
rman_init_from_resource(struct rman *rm, struct resource *r);
int
rman_is_region_manager(struct resource *r, struct rman *rm);
int
rman_manage_region(struct rman *rm, rman_res_t start, rman_res_t end);
int
rman_first_free_region(struct rman *rm, rman_res_t *start,
rman_res_t *end);
int
rman_last_free_region(struct rman *rm, rman_res_t *start,
rman_res_t *end);
int
rman_release_resource(struct resource *r);
struct resource *
rman_reserve_resource(struct rman *rm, rman_res_t start, rman_res_t end,
rman_res_t count, u_int flags, device_t dev);
struct resource *
rman_reserve_resource_bound(struct rman *rm, rman_res_t start,
rman_get_start(struct resource *r);
rman_res_t
rman_get_end(struct resource *r);
device_t
rman_get_device(struct resource *r);
rman_res_t
rman_get_size(struct resource *r);
u_int
rman_get_flags(struct resource *r);
void
rman_set_mapping(struct resource *r, struct resource_map *map);
void
rman_get_mapping(struct resource *r, struct resource_map *map);
void
rman_set_virtual(struct resource *r, void *v);
void *
rman_get_virtual(struct resource *r);
void
rman_set_bustag(struct resource *r, bus_space_tag_t t);
bus_space_tag_t
rman_get_bustag(struct resource *r);
void
rman_set_bushandle(struct resource *r, bus_space_handle_t h);
bus_space_handle_t
rman_get_bushandle(struct resource *r);
void
rman_set_rid(struct resource *r, int rid);
int
rman_get_rid(struct resource *r);
DESCRIPTION
The rman set of functions provides a flexible resource management
abstraction. It is used extensively by the bus management code. It
implements the abstractions of region and resource. A region descriptor
is used to manage a region; this could be memory or some other form of
bus space.
Each region has a set of bounds. Within these bounds, allocated segments
may reside. Each segment, termed a resource, has several properties
which are represented by a 16-bit flag register, as follows.
#define RF_ALLOCATED 0x0001 /* resource has been reserved */
#define RF_ACTIVE 0x0002 /* resource allocation has been activated */
#define RF_SHAREABLE 0x0004 /* resource permits contemporaneous sharing */
#define RF_FIRSTSHARE 0x0020 /* first in sharing list */
the rm argument, for use with the resource management functions. It is
required that the fields rm_type and rm_descr of struct rman be set
before calling rman_init(). The field rm_type shall be set to
RMAN_ARRAY. The field rm_descr shall be set to a string that describes
the resource to be managed. The rm_start and rm_end fields may be set to
limit the range of acceptable resource addresses. If these fields are
not set, rman_init() will initialize them to allow the entire range of
resource addresses. It also initializes any mutexes associated with the
structure. If rman_init() fails to initialize the mutex, it will return
ENOMEM; otherwise it will return 0 and rm will be initialized.
The rman_fini() function frees any structures associated with the
structure pointed to by the rm argument. If any of the resources within
the managed region have the RF_ALLOCATED flag set, it will return EBUSY;
otherwise, any mutexes associated with the structure will be released and
destroyed, and the function will return 0.
The rman_manage_region() function establishes the concept of a region
which is under rman control. The rman argument points to the region
descriptor. The start and end arguments specify the bounds of the
region. If successful, rman_manage_region() will return 0. If the
region overlaps with an existing region, it will return EBUSY. If any
part of the region falls outside of the valid address range for rm, it
will return EINVAL. ENOMEM will be returned when rman_manage_region()
failed to allocate memory for the region.
The rman_init_from_resource() function is a wrapper routine to create a
resource manager backed by an existing resource. It initializes rm using
rman_init() and then adds a region to rm corresponding to the address
range allocated to r via rman_manage_region().
The rman_first_free_region() and rman_last_free_region() functions can be
used to query a resource manager for its first (or last) unallocated
region. If rm contains no free region, these functions will return
ENOENT. Otherwise, *start and *end are set to the bounds of the free
region and zero is returned.
The rman_reserve_resource_bound() function is where the bulk of the rman
logic is located. It attempts to reserve a contiguous range in the
specified region rm for the use of the device dev. The caller can
specify the start and end of an acceptable range, as well as a boundary
restriction and required alignment, and the code will attempt to find a
free segment which fits. The start argument is the lowest acceptable
starting value of the resource. The end argument is the highest
acceptable ending value of the resource. Therefore, start + count - 1
must be <= end for any allocation to happen. The alignment requirement
(if any) is specified in flags. The bound argument may be set to specify
a boundary restriction such that an allocated region may cross an address
that is a multiple of the boundary. The bound argument must be a power
of two. It may be set to zero to specify no boundary restriction. A
shared segment will be allocated if the RF_SHAREABLE flag is set,
otherwise an exclusive segment will be allocated. If this shared segment
already exists, the caller has its device added to the list of consumers.
The rman_reserve_resource() function is used to reserve resources within
a previously established region. It is a simplified interface to
rman_reserve_resource_bound() which passes 0 for the bound argument.
The rman_make_alignment_flags() function returns the flag mask
address range of an allocated resource to reserve start through end. It
can be used to grow or shrink one or both ends of the resource range.
The current implementation does not support entirely relocating the
resource and will fail with EINVAL if the new resource range does not
overlap the old resource range. If either end of the resource range
grows and the new resource range would conflict with another allocated
resource, the function will fail with EBUSY. The rman_adjust_resource()
function does not support adjusting the resource range for shared
resources and will fail such attempts with EINVAL. Upon success, the
resource r will have a start address of start and an end address of end
and the function will return zero. Note that none of the constraints of
the original allocation request such as alignment or boundary
restrictions are checked by rman_adjust_resource(). It is the caller's
responsibility to enforce any such requirements.
The rman_release_resource() function releases the reserved resource r.
It may attempt to merge adjacent free resources.
The rman_activate_resource() function marks a resource as active, by
setting the RF_ACTIVE flag. If this is a time shared resource, and the
caller has not yet acquired the resource, the function returns EBUSY.
The rman_deactivate_resource() function marks a resource r as inactive,
by clearing the RF_ACTIVE flag. If other consumers are waiting for this
range, it will wakeup their threads.
The rman_get_start(), rman_get_end(), rman_get_size(), and
rman_get_flags() functions return the bounds, size and flags of the
previously reserved resource r.
The rman_set_bustag() function associates a bus_space_tag_t t with the
resource r. The rman_get_bustag() function is used to retrieve this tag
once set.
The rman_set_bushandle() function associates a bus_space_handle_t h with
the resource r. The rman_get_bushandle() function is used to retrieve
this handle once set.
The rman_set_virtual() function is used to associate a kernel virtual
address with a resource r. The rman_get_virtual() function can be used
to retrieve the KVA once set.
The rman_set_mapping() function is used to associate a resource mapping
with a resource r. The mapping must cover the entire resource. Setting
a mapping sets the associated bus_space(9) handle and tag for r as well
as the kernel virtual address if the mapping contains one. These
individual values can be retrieved via rman_get_bushandle(),
rman_get_bustag(), and rman_get_virtual().
The rman_get_mapping() function can be used to retrieve the associated
resource mapping once set.
The rman_set_rid() function associates a resource identifier with a
resource r. The rman_get_rid() function retrieves this RID.
The rman_get_device() function returns a pointer to the device which
reserved the resource r.
SEE ALSO
FreeBSD 14.0-RELEASE-p11 May 20, 2016 FreeBSD 14.0-RELEASE-p11