• Start
• Documentation
  • PostgreSQL
  • mnoGoSearch
  • Apache 2.4
  • FreeBSD handbook
  • FreeBSD Manual
  • FreeBSD Source
• Tools
• Search
• Protected Area

plain

# # NOTE: Please would any committer updating this file also update the # make.conf(5) manual page, if necessary, which is located in # src/share/man/man5/make.conf.5. # # /etc/make.conf, if present, will be read by make (see # /usr/share/mk/sys.mk). It allows you to override macro definitions # to make without changing your source tree, or anything the source # tree installs. # # This file must be in valid Makefile syntax. # # There are additional things you can put into /etc/make.conf. # You have to find those in the Makefiles and documentation of # the source tree. # # Note, that you should not set MAKEOBJDIRPREFIX or MAKEOBJDIR # from make.conf (or as command line variables to make). # Both variables are environment variables for make and must be used as: # # env MAKEOBJDIRPREFIX=/big/directory make # # # The CPUTYPE variable controls which processor should be targeted for # generated code. This controls processor-specific optimizations in # certain code (currently only OpenSSL) as well as modifying the value # of CFLAGS to contain the appropriate optimization directive to cc. # The automatic setting of CFLAGS may be overridden using the # NO_CPU_CFLAGS variable below. # Currently the following CPU types are recognized: # Intel x86 architecture: # (AMD CPUs) znver3, znver2, znver1, bdver4, bdver3, bdver2, bdver1, # btver2, btver1, amdfam10, opteron-sse3, athlon64-sse3, # k8-sse3, opteron, athlon64, athlon-fx, k8, athlon-mp, # athlon-xp, athlon-4, athlon-tbird, athlon, k7, geode, # k6-3, k6-2, k6 # (Intel CPUs) alderlake, sapphirerapids, tigerlake, cooperlake, # cascadelake, tremont, goldmont-plus, icelake-server, # icelake-client, cannonlake, knm, skylake-avx512, knl, # goldmont, skylake, broadwell, haswell, ivybridge, # sandybridge, westmere, nehalem, silvermont, bonnell, # core2, core, nocona, pentium4m, pentium4, prescott, # pentium3m, pentium3, pentium-m, pentium2, pentiumpro, # pentium-mmx, pentium, i486 # (VIA CPUs) c7, c3-2, c3 # ARM architecture: armv5, armv5te, armv6, armv6t2, arm1176jzf-s, armv7, # armv7-a, armv7ve, generic-armv7-a, cortex-a5, # cortex-a7, cortex-a8, cortex-a9, cortex-a12, # cortex-a15, cortex-a17 # ARM64 architecture: cortex-a53, cortex-a57, cortex-a72, # exynos-m1 # # (?= allows to buildworld for a different CPUTYPE.) # #CPUTYPE?=pentium3 #NO_CPU_CFLAGS= # Don't add -march=<cpu> to CFLAGS automatically # # CFLAGS controls the compiler settings used when compiling C code. # Note that optimization settings other than -O and -O2 are not recommended # or supported for compiling the world or the kernel - please revert any # nonstandard optimization settings # before submitting bug reports without patches to the developers. # # CFLAGS.arch provides a mechanism for applying CFLAGS only when building # the given architecture. This is useful primarily on a system used for # cross-building, when you have a set of flags to apply to the TARGET_ARCH # being cross-built but don't want those settings applied to building the # cross-tools or other components that run on the build host machine. # # CXXFLAGS controls the compiler settings used when compiling C++ code. # Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish # to add to CXXFLAGS value, "+=" must be used rather than "=". Using "=" # alone will remove the often needed contents of CFLAGS from CXXFLAGS. # # Additional compiler flags can be specified that extend or override # default ones. However, neither the base system nor ports are guaranteed # to build and function without problems with non-default settings. # # CFLAGS+= -msse3 # CXXFLAGS+= -msse3 # CFLAGS.armv6+= -mfloat-abi=softfp # # MAKE_SHELL controls the shell used internally by make(1) to process the # command scripts in makefiles. Three shells are supported, sh, ksh, and # csh. Using sh is most common, and advised. Using ksh *may* work, but is # not guaranteed to. Using csh is absurd. The default is to use sh. # #MAKE_SHELL?=sh # # BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested # for use in developing FreeBSD and testing changes. They can be used by # putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. -Wconversion is not # included here due to compiler bugs, e.g., mkdir()'s mode_t argument. # #BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \ # -Wcast-qual -Wchar-subscripts -Winline \ # -Wmissing-prototypes -Wnested-externs -Wpointer-arith \ # -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings # # To compile just the kernel with special optimizations, you should use # this instead of CFLAGS (which is not applicable to kernel builds anyway). # There is very little to gain by using higher optimization levels, and doing # so can cause problems. # #COPTFLAGS= -O -pipe # # Compare before install. #INSTALL+= -C # # Mtree will follow symlinks. #MTREE_FOLLOWS_SYMLINKS= -L # # To enable installing newgrp(1) with the setuid bit turned on. # Without the setuid bit, newgrp cannot change users' groups. #ENABLE_SUID_NEWGRP= # # To avoid building various parts of the base system: #NO_MODULES= # do not build modules with the kernel #NO_SHARE= # do not go into the share subdir #NO_SHARED= # build /bin and /sbin statically linked (bad idea) # # Variables that control how ppp(8) is built. #PPP_NO_NAT= # do not build with NAT support (see make.conf(5)) #PPP_NO_NETGRAPH= # do not build with Netgraph support #PPP_NO_RADIUS= # do not build with RADIUS support #PPP_NO_SUID= # build with normal permissions # #TRACEROUTE_NO_IPSEC= # do not build traceroute(8) with IPSEC support # # To build sys/modules when building the world (our old way of doing things). #MODULES_WITH_WORLD= # do not build modules when building kernel # # The list of modules to build instead of all of them. #MODULES_OVERRIDE= linux ipfw # # The list of modules to never build, applied *after* MODULES_OVERRIDE. #WITHOUT_MODULES= plip # # If you do not want unformatted manual pages to be compressed # when they are installed: # #WITHOUT_MANCOMPRESS=t # # # Default format for system documentation in share/doc, depends on # your printer. Set this to "ascii" for simple printers or screen. # #PRINTERDEVICE= ps # # # How long to wait for a console keypress before booting the default kernel. # This value is approximately in milliseconds. Keypresses are accepted by the # BIOS before booting from disk, making it possible to give custom boot # parameters even when this is set to 0. # #BOOTWAIT=0 #BOOTWAIT=30000 # # By default, the system will always use the keyboard/video card as system # console. However, the boot blocks may be dynamically configured to use a # serial port in addition to or instead of the keyboard/video console. # # By default we use COM1 as our serial console port *if* we're going to use # a serial port as our console at all. Alter as necessary. # # COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8 # #BOOT_COMCONSOLE_PORT= 0x3F8 # # The default serial console speed is 115200. It can be set to a different # rate, if desired in your environment. # #BOOT_COMCONSOLE_SPEED= 9600 # # By default the 'pxeboot' loader retrieves the kernel via NFS. Defining # this and recompiling /usr/src/stand will cause it to retrieve the kernel # via TFTP. This allows pxeboot to load a custom BOOTP diskless kernel yet # still mount the server's '/' (i.e. rather than load the server's kernel). # #LOADER_TFTP_SUPPORT= YES # # # Kerberos 5 su (k5su) # If you want to use the k5su utility, define this to have it installed # set-user-ID. #ENABLE_SUID_K5SU= # # # top(1) uses a hash table for the user names. The size of this hash # can be tuned to match the number of local users. The table size should # be a prime number approximately twice as large as the number of lines in # /etc/passwd. The default number is 20011. # #TOP_TABLE_SIZE= 101 # # Documentation # # The list of languages to build and install. # #DOC_LANG= en ru # # # sendmail # # The following sets the default m4 configuration file to use at # install time. Use with caution as a make install will overwrite # any existing /etc/mail/sendmail.cf. Note that SENDMAIL_CF is now # deprecated. The value should be a fully qualified path name. # #SENDMAIL_MC=/etc/mail/myconfig.mc # # The following sets the default m4 configuration file for mail # submission to use at install time. Use with caution as a make # install will overwrite any existing /etc/mail/submit.cf. The # value should be a fully qualified path name. # #SENDMAIL_SUBMIT_MC=/etc/mail/mysubmit.mc # # If you need to build additional .cf files during a make buildworld, # include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC. # #SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc # # The following overrides the default location for the m4 configuration # files used to build a .cf file from a .mc file. # #SENDMAIL_CF_DIR=/usr/local/share/sendmail/cf # # Setting the following variable modifies the flags passed to m4 when # building a .cf file from a .mc file. It can be used to enable # features disabled by default. # #SENDMAIL_M4_FLAGS= # # Setting the following variables modifies the build environment for # sendmail and its related utilities. For example, SASL support can be # added with settings such as: # # with SASLv1: # SENDMAIL_CFLAGS=-I/usr/local/include/sasl1 -DSASL # SENDMAIL_LDADD=/usr/local/lib/libsasl.so # # with SASLv2: # SENDMAIL_CFLAGS=-I/usr/local/include -DSASL=2 # SENDMAIL_LDADD=/usr/local/lib/libsasl2.so # # Note: If you are using Cyrus SASL with other applications which require # access to the sasldb file, you should add the following to your # sendmail.mc file: # # define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLDBFile') # #SENDMAIL_CFLAGS= #SENDMAIL_LDFLAGS= #SENDMAIL_LDADD= #SENDMAIL_DPADD= # # Setting SENDMAIL_SET_USER_ID will install the sendmail binary as a # set-user-ID root binary instead of a set-group-ID smmsp binary and will # prevent the installation of /etc/mail/submit.cf. # This is a deprecated mode of operation. See etc/mail/README for more # information. # #SENDMAIL_SET_USER_ID= # # The permissions to use on alias and map databases generated using # /etc/mail/Makefile. Defaults to 0640. # #SENDMAIL_MAP_PERMS= # # # It is also possible to set variables in make.conf which will only be # used when compiling a specific port. For more details see make(1). # #.if ${.CURDIR:M*/irc/irssi-devel*} #WITH_DEBUG=YES #.endif # # Another approach is to use /usr/ports/ports-mgmt/portconf which has # its own config file for port specific options.