# This is a generated file, do NOT edit! # See contrib/bmake/bsd.after-import.mk # # $Id: Makefile,v 1.199 2023/06/20 17:27:20 sjg Exp $ # # $NetBSD: Makefile,v 1.339 2023/06/20 09:25:34 rillig Exp $ # # Unit tests for make(1) # # The main targets are: # # all: # run all the tests # test: # run 'all', and compare to expected results # accept: # move generated output to expected results # # Settable variables # # TEST_MAKE # The make program to be tested. # # # Adding a test case # # Each feature should get its own set of tests in its own suitably # named makefile (*.mk), with its own set of expected results (*.exp), # and it should be added to the TESTS list. # .MAIN: all # we use these below but we might be an older make .MAKE.OS?= ${uname -s:L:sh} .MAKE.UID?= ${id -u:L:sh} # for many tests we need a TMPDIR that will not collide # with other users. .if ${.OBJDIR} != ${.CURDIR} # easy TMPDIR:= ${.OBJDIR}/tmp .elif defined(TMPDIR) TMPDIR:= ${TMPDIR}/uid${.MAKE.UID} .else TMPDIR:= /tmp/uid${.MAKE.UID} .endif # make sure it exists .if !exist(${TMPDIR}) _!= mkdir -p ${TMPDIR} .endif # Each test is in a sub-makefile. # Keep the list sorted. # Any test that is commented out must be ignored in # src/tests/usr.bin/make/t_make.sh as well. #TESTS+= archive #TESTS+= archive-suffix TESTS+= cmd-errors TESTS+= cmd-errors-jobs TESTS+= cmd-errors-lint TESTS+= cmd-interrupt TESTS+= cmdline TESTS+= cmdline-redirect-stdin TESTS+= cmdline-undefined TESTS+= comment TESTS+= compat-error TESTS+= cond-cmp-numeric TESTS+= cond-cmp-numeric-eq TESTS+= cond-cmp-numeric-ge TESTS+= cond-cmp-numeric-gt TESTS+= cond-cmp-numeric-le TESTS+= cond-cmp-numeric-lt TESTS+= cond-cmp-numeric-ne TESTS+= cond-cmp-string TESTS+= cond-cmp-unary TESTS+= cond-eof TESTS+= cond-func TESTS+= cond-func-commands TESTS+= cond-func-defined TESTS+= cond-func-empty TESTS+= cond-func-exists TESTS+= cond-func-make TESTS+= cond-func-make-main TESTS+= cond-func-target TESTS+= cond-late TESTS+= cond-op TESTS+= cond-op-and TESTS+= cond-op-and-lint TESTS+= cond-op-not TESTS+= cond-op-or TESTS+= cond-op-or-lint TESTS+= cond-op-parentheses TESTS+= cond-short TESTS+= cond-token-number TESTS+= cond-token-plain TESTS+= cond-token-string TESTS+= cond-token-var TESTS+= cond-undef-lint TESTS+= counter TESTS+= counter-append TESTS+= dep TESTS+= dep-colon TESTS+= dep-colon-bug-cross-file TESTS+= dep-double-colon TESTS+= dep-double-colon-indep TESTS+= dep-duplicate TESTS+= dep-exclam TESTS+= dep-none TESTS+= dep-op-missing TESTS+= dep-percent TESTS+= dep-var TESTS+= dep-wildcards TESTS+= depsrc TESTS+= depsrc-end TESTS+= depsrc-exec TESTS+= depsrc-ignore TESTS+= depsrc-made TESTS+= depsrc-make TESTS+= depsrc-meta TESTS+= depsrc-nometa TESTS+= depsrc-nometa_cmp TESTS+= depsrc-nopath TESTS+= depsrc-notmain TESTS+= depsrc-optional TESTS+= depsrc-phony TESTS+= depsrc-precious TESTS+= depsrc-recursive TESTS+= depsrc-silent TESTS+= depsrc-use TESTS+= depsrc-usebefore TESTS+= depsrc-usebefore-double-colon TESTS+= depsrc-wait TESTS+= deptgt TESTS+= deptgt-begin TESTS+= deptgt-begin-fail TESTS+= deptgt-begin-fail-indirect TESTS+= deptgt-default TESTS+= deptgt-delete_on_error TESTS+= deptgt-end TESTS+= deptgt-end-fail TESTS+= deptgt-end-fail-all TESTS+= deptgt-end-fail-indirect TESTS+= deptgt-end-jobs TESTS+= deptgt-error TESTS+= deptgt-ignore TESTS+= deptgt-interrupt TESTS+= deptgt-main TESTS+= deptgt-makeflags TESTS+= deptgt-no_parallel TESTS+= deptgt-nopath TESTS+= deptgt-notparallel TESTS+= deptgt-objdir TESTS+= deptgt-order TESTS+= deptgt-path TESTS+= deptgt-path-suffix TESTS+= deptgt-phony TESTS+= deptgt-posix TESTS+= deptgt-precious TESTS+= deptgt-shell TESTS+= deptgt-silent TESTS+= deptgt-silent-jobs TESTS+= deptgt-stale TESTS+= deptgt-suffixes TESTS+= dir TESTS+= dir-expand-path TESTS+= directive TESTS+= directive-dinclude TESTS+= directive-elif TESTS+= directive-elifdef TESTS+= directive-elifmake TESTS+= directive-elifndef TESTS+= directive-elifnmake TESTS+= directive-else TESTS+= directive-endfor TESTS+= directive-endif TESTS+= directive-error TESTS+= directive-export TESTS+= directive-export-env TESTS+= directive-export-impl TESTS+= directive-export-gmake TESTS+= directive-export-literal TESTS+= directive-for TESTS+= directive-for-break TESTS+= directive-for-empty TESTS+= directive-for-errors TESTS+= directive-for-escape TESTS+= directive-for-generating-endif TESTS+= directive-for-if TESTS+= directive-for-lines TESTS+= directive-for-null TESTS+= directive-hyphen-include TESTS+= directive-if TESTS+= directive-if-nested TESTS+= directive-ifdef TESTS+= directive-ifmake TESTS+= directive-ifndef TESTS+= directive-ifnmake TESTS+= directive-include TESTS+= directive-include-fatal TESTS+= directive-include-guard TESTS+= directive-info TESTS+= directive-misspellings TESTS+= directive-sinclude TESTS+= directive-undef TESTS+= directive-unexport TESTS+= directive-unexport-env TESTS+= directive-warning TESTS+= dollar TESTS+= doterror TESTS+= dotwait TESTS+= error TESTS+= # escape # broken by reverting POSIX changes TESTS+= export TESTS+= export-all TESTS+= export-env TESTS+= export-variants TESTS+= gnode-submake TESTS+= hanoi-include TESTS+= impsrc TESTS+= include-main TESTS+= job-flags #TESTS+= job-output-long-lines TESTS+= job-output-null TESTS+= jobs-empty-commands TESTS+= jobs-empty-commands-error TESTS+= jobs-error-indirect TESTS+= jobs-error-nested TESTS+= jobs-error-nested-make TESTS+= lint TESTS+= make-exported TESTS+= meta-cmd-cmp TESTS+= moderrs TESTS+= modmisc .if ${.MAKE.UID} > 0 TESTS+= objdir-writable .endif TESTS+= opt TESTS+= opt-backwards TESTS+= opt-chdir TESTS+= opt-debug TESTS+= opt-debug-all TESTS+= opt-debug-archive TESTS+= opt-debug-curdir TESTS+= opt-debug-cond TESTS+= opt-debug-dir TESTS+= opt-debug-errors TESTS+= opt-debug-errors-jobs TESTS+= opt-debug-file TESTS+= opt-debug-for TESTS+= opt-debug-graph1 TESTS+= opt-debug-graph2 TESTS+= opt-debug-graph3 TESTS+= opt-debug-hash #TESTS+= opt-debug-jobs TESTS+= opt-debug-lint TESTS+= opt-debug-loud TESTS+= opt-debug-meta TESTS+= opt-debug-making TESTS+= opt-debug-no-rm TESTS+= opt-debug-parse TESTS+= opt-debug-suff TESTS+= opt-debug-targets TESTS+= opt-debug-varraw TESTS+= opt-debug-var TESTS+= opt-debug-x-trace TESTS+= opt-define TESTS+= opt-env TESTS+= opt-file TESTS+= opt-ignore TESTS+= opt-include-dir TESTS+= opt-jobs TESTS+= opt-jobs-internal TESTS+= opt-jobs-no-action TESTS+= opt-keep-going TESTS+= opt-keep-going-indirect TESTS+= opt-keep-going-multiple TESTS+= opt-m-include-dir TESTS+= opt-no-action TESTS+= opt-no-action-at-all TESTS+= opt-no-action-runflags TESTS+= opt-no-action-touch TESTS+= opt-query TESTS+= opt-raw TESTS+= opt-silent TESTS+= opt-touch TESTS+= opt-touch-jobs TESTS+= opt-tracefile TESTS+= opt-var-expanded TESTS+= opt-var-literal TESTS+= opt-version TESTS+= opt-warnings-as-errors TESTS+= opt-where-am-i TESTS+= opt-x-reduce-exported TESTS+= order TESTS+= parse TESTS+= parse-var TESTS+= phony-end TESTS+= posix TESTS+= # posix1 # broken by reverting POSIX changes TESTS+= recursive TESTS+= sh TESTS+= sh-dots TESTS+= sh-errctl TESTS+= sh-flags TESTS+= sh-jobs TESTS+= sh-jobs-error TESTS+= sh-leading-at TESTS+= sh-leading-hyphen TESTS+= sh-leading-plus TESTS+= sh-meta-chars TESTS+= sh-multi-line TESTS+= sh-single-line TESTS+= shell-csh TESTS+= shell-custom .if exists(/bin/ksh) TESTS+= shell-ksh .endif TESTS+= shell-sh TESTS+= suff-add-later TESTS+= suff-clear-regular TESTS+= suff-clear-single TESTS+= suff-incomplete TESTS+= suff-lookup TESTS+= suff-main TESTS+= suff-main-several TESTS+= suff-phony TESTS+= suff-rebuild TESTS+= suff-self TESTS+= suff-transform-debug TESTS+= suff-transform-endless TESTS+= suff-transform-expand TESTS+= suff-transform-select TESTS+= suff-use TESTS+= sunshcmd TESTS+= ternary TESTS+= unexport TESTS+= unexport-env TESTS+= use-inference TESTS+= var-readonly TESTS+= var-scope TESTS+= var-scope-cmdline TESTS+= var-scope-env TESTS+= var-scope-global TESTS+= var-scope-local TESTS+= var-scope-local-legacy TESTS+= var-eval-short TESTS+= var-op TESTS+= var-op-append TESTS+= var-op-assign TESTS+= var-op-default TESTS+= var-op-expand TESTS+= var-op-shell TESTS+= var-op-sunsh TESTS+= var-recursive TESTS+= varcmd TESTS+= vardebug TESTS+= varfind TESTS+= varmisc TESTS+= varmod TESTS+= varmod-assign TESTS+= varmod-assign-shell TESTS+= varmod-defined TESTS+= varmod-edge TESTS+= varmod-exclam-shell TESTS+= varmod-extension TESTS+= varmod-gmtime TESTS+= varmod-hash TESTS+= varmod-head TESTS+= varmod-ifelse TESTS+= varmod-indirect TESTS+= varmod-l-name-to-value TESTS+= varmod-localtime TESTS+= varmod-loop TESTS+= varmod-loop-delete TESTS+= varmod-loop-varname TESTS+= varmod-match TESTS+= varmod-match-escape TESTS+= varmod-mtime TESTS+= varmod-no-match TESTS+= varmod-order TESTS+= varmod-order-numeric TESTS+= varmod-order-reverse TESTS+= varmod-order-shuffle TESTS+= varmod-order-string TESTS+= varmod-path TESTS+= varmod-quote TESTS+= varmod-quote-dollar TESTS+= varmod-range TESTS+= varmod-remember TESTS+= varmod-root TESTS+= varmod-select-words TESTS+= varmod-shell TESTS+= varmod-subst TESTS+= varmod-subst-regex TESTS+= varmod-sun-shell TESTS+= varmod-sysv TESTS+= varmod-tail TESTS+= varmod-to-abs TESTS+= varmod-to-lower TESTS+= varmod-to-many-words TESTS+= varmod-to-one-word TESTS+= varmod-to-separator TESTS+= varmod-to-upper TESTS+= varmod-undefined TESTS+= varmod-unique TESTS+= varname TESTS+= varname-dollar TESTS+= varname-dot-alltargets TESTS+= varname-dot-curdir TESTS+= varname-dot-includes TESTS+= varname-dot-includedfromdir TESTS+= varname-dot-includedfromfile TESTS+= varname-dot-libs TESTS+= varname-dot-make-dependfile TESTS+= varname-dot-make-expand_variables TESTS+= varname-dot-make-exported TESTS+= varname-dot-make-jobs TESTS+= varname-dot-make-jobs-prefix TESTS+= varname-dot-make-level TESTS+= varname-dot-make-makefile_preference TESTS+= varname-dot-make-makefiles TESTS+= varname-dot-make-meta-bailiwick TESTS+= varname-dot-make-meta-created TESTS+= varname-dot-make-meta-files .if ${.MAKE.PATH_FILEMON:Uno:Nktrace:N/dev*} == "" && ${TMPDIR:N/tmp*:N/var/tmp*} != "" # these tests will not work if TMPDIR is or is a subdir of # /tmp or /var/tmp .if ${.MAKE.PATH_FILEMON:N/dev/*} != "" || exists(${.MAKE.PATH_FILEMON}) TESTS+= varname-dot-make-meta-ignore_filter TESTS+= varname-dot-make-meta-ignore_paths TESTS+= varname-dot-make-meta-ignore_patterns TESTS+= varname-dot-make-path_filemon .else .warning Skipping tests that require ${.MAKE.PATH_FILEMON} .endif .endif TESTS+= varname-dot-make-meta-prefix TESTS+= varname-dot-make-mode TESTS+= varname-dot-make-pid TESTS+= varname-dot-make-ppid TESTS+= varname-dot-make-save_dollars TESTS+= varname-dot-makeflags TESTS+= varname-dot-makeoverrides TESTS+= varname-dot-newline TESTS+= varname-dot-objdir TESTS+= varname-dot-parsedir TESTS+= varname-dot-parsefile TESTS+= varname-dot-path TESTS+= varname-dot-shell TESTS+= varname-dot-suffixes TESTS+= varname-dot-targets TESTS+= varname-empty TESTS+= varname-make TESTS+= varname-make_print_var_on_error TESTS+= varname-make_print_var_on_error-jobs TESTS+= varname-makefile TESTS+= varname-makeflags TESTS+= varname-pwd TESTS+= varname-vpath TESTS+= varparse-dynamic TESTS+= varparse-errors TESTS+= varparse-mod TESTS+= varparse-undef-partial # some shells have quirks _shell := ${.SHELL:tA:T} .if ${_shell} == "dash" # dash fails -x output BROKEN_TESTS+= opt-debug-x-trace .elif ${_shell} == "ksh" BROKEN_TESTS+= sh-flags .endif .if ${.MAKE.OS:NDarwin} == "" BROKEN_TESTS+= shell-ksh .endif .if ${.MAKE.OS} == "SCO_SV" BROKEN_TESTS+= \ opt-debug-graph[23] \ varmod-localtime \ varmod-to-separator \ .if ${_shell} == "bash" BROKEN_TESTS+= job-output-null .else BROKEN_TESTS+= \ cmd-interrupt \ job-flags \ .endif .endif # Some tests just do not work on some platforms or environments # so allow for some filtering. .if !empty(BROKEN_TESTS) .warning Skipping broken tests: ${BROKEN_TESTS:O:u} TESTS:= ${TESTS:${BROKEN_TESTS:S,^,N,:ts:}} .endif # Ideas for more tests: # char-0020-space.mk # char-005C-backslash.mk # escape-cond-str.mk # escape-cond-func-arg.mk # escape-varmod.mk # escape-varmod-define.mk # escape-varmod-match.mk # escape-varname.mk # escape-varassign-varname.mk # escape-varassign-varname-cmdline.mk # escape-varassign-value.mk # escape-varassign-value-cmdline.mk # escape-dependency-source.mk # escape-dependency-target.mk # escape-for-varname.mk # escape-for-item.mk # posix-*.mk (see posix.mk and posix1.mk) # Additional environment variables for some of the tests. # The base environment is -i PATH="$PATH". ENV.depsrc-optional+= TZ=UTC ENV.deptgt-phony+= MAKESYSPATH=. ENV.directive-undef= ENV_VAR=env-value ENV.opt-env= FROM_ENV=value-from-env ENV.opt-m-include-dir= ${MAKEOBJDIR:DMAKEOBJDIR=${MAKEOBJDIR}} ENV.varmisc= FROM_ENV=env ENV.varmisc+= FROM_ENV_BEFORE=env ENV.varmisc+= FROM_ENV_AFTER=env ENV.varmod-localtime+= TZ=${UTC_1:UEurope/Berlin} ENV.varname-vpath+= VPATH=varname-vpath.dir:varname-vpath.dir2 # Override make flags for some of the tests; default is -k. # If possible, write ".MAKEFLAGS: -dv" in the test .mk file instead of # settings FLAGS.test=-dv here, since that is closer to the test code. FLAGS.cond-func-make= via-cmdline FLAGS.doterror= # none, especially not -k FLAGS.jobs-error-indirect= # none, especially not -k FLAGS.jobs-error-nested= # none, especially not -k FLAGS.jobs-error-nested-make= # none, especially not -k FLAGS.varname-empty= -dv '$${:U}=cmdline-u' '=cmdline-plain' # Some tests need extra postprocessing. SED_CMDS.deptgt-phony= ${STD_SED_CMDS.dd} SED_CMDS.dir= ${STD_SED_CMDS.dd} SED_CMDS.directive-include-guard= \ -e '/\.MAKEFLAGS/d' \ -e '/^Parsing line/d' \ -e '/^SetFilenameVars:/d' \ -e '/^ParseDependency/d' \ -e '/^ParseEOF:/d' SED_CMDS.export= -e '/^[^=_A-Za-z0-9]*=/d' SED_CMDS.export-all= ${SED_CMDS.export} SED_CMDS.export-env= ${SED_CMDS.export} SED_CMDS.cmdline= -e 's,uid${.MAKE.UID}/,,' SED_CMDS.job-output-long-lines= \ ${:D Job separators on their own line are ok. } \ -e '/^--- job-[ab] ---$$/d' \ ${:D Plain output lines are ok as well. } \ ${:D They may come in multiples of 1024 or as 10000. } \ -e '/^aa*$$/d' \ -e '/^bb*$$/d' \ ${:D The following lines should rather not occur since the job } \ ${:D marker should always be at the beginning of the line. } \ -e '/^aa*--- job-b ---$$/d' \ -e '/^bb*--- job-a ---$$/d' SED_CMDS.opt-chdir= -e 's,\(nonexistent\).[1-9][0-9]*,\1,' \ -e '/name/s,file,File,' \ -e 's,no such,No such,' \ -e 's,Filename,File name,' # meta line numbers can vary based on filemon implementation SED_CMDS.meta-ignore= -e 's,\(\.meta:\) [1-9][0-9]*:,\1 <line>:,' SED_CMDS.opt-debug-graph1= ${STD_SED_CMDS.dg1} SED_CMDS.opt-debug-graph2= ${STD_SED_CMDS.dg2} SED_CMDS.opt-debug-graph3= ${STD_SED_CMDS.dg3} SED_CMDS.opt-debug-hash= -e 's,\(numEntries\)=[1-9][0-9],\1=<entries>,' SED_CMDS.opt-debug-jobs= -e 's,([0-9][0-9]*),(<pid>),' SED_CMDS.opt-debug-jobs+= -e 's,pid [0-9][0-9]*,pid <pid>,' SED_CMDS.opt-debug-jobs+= -e 's,Process [0-9][0-9]*,Process <pid>,' SED_CMDS.opt-debug-jobs+= -e 's,JobFinish: [0-9][0-9]*,JobFinish: <pid>,' SED_CMDS.opt-debug-jobs+= -e 's,Command: ${.SHELL:T},Command: <shell>,' # The "-q" may be there or not, see jobs.c, variable shells. SED_CMDS.opt-debug-jobs+= -e 's,^\(.Command: <shell>\) -q,\1,' SED_CMDS.opt-debug-lint+= ${STD_SED_CMDS.regex} SED_CMDS.opt-jobs-no-action= ${STD_SED_CMDS.hide-from-output} SED_CMDS.opt-no-action-runflags= ${STD_SED_CMDS.hide-from-output} SED_CMDS.opt-where-am-i= -e '/usr.obj/d' # For Compat_RunCommand, useShell == false. SED_CMDS.sh-dots= -e 's,^.*\.\.\.:.*,<not found: ...>,' # For Compat_RunCommand, useShell == true. SED_CMDS.sh-dots+= -e 's,^make: exec(\(.*\)) failed (.*)$$,<not found: \1>,' SED_CMDS.sh-dots+= -e 's,^\(\*\*\* Error code \)[1-9][0-9]*,\1<nonzero>,' SED_CMDS.sh-errctl= ${STD_SED_CMDS.dj} SED_CMDS.sh-flags= ${STD_SED_CMDS.hide-from-output} SED_CMDS.shell-csh= ${STD_SED_CMDS.white-space} SED_CMDS.sh-leading-hyphen= ${STD_SED_CMDS.shell} SED_CMDS.suff-main+= ${STD_SED_CMDS.dg1} SED_CMDS.suff-main-several+= ${STD_SED_CMDS.dg1} SED_CMDS.suff-transform-debug+= ${STD_SED_CMDS.dg1} SED_CMDS.var-op-shell+= ${STD_SED_CMDS.shell} SED_CMDS.var-op-shell+= -e '/command/s,No such.*,not found,' SED_CMDS.var-op-shell+= ${STD_SED_CMDS.white-space} SED_CMDS.vardebug+= -e 's,${.SHELL},</path/to/shell>,' SED_CMDS.varmod-subst-regex+= ${STD_SED_CMDS.regex} SED_CMDS.varparse-errors+= ${STD_SED_CMDS.timestamp} SED_CMDS.varname-dot-make-meta-ignore_filter+= ${SED_CMDS.meta-ignore} SED_CMDS.varname-dot-make-meta-ignore_paths+= ${SED_CMDS.meta-ignore} SED_CMDS.varname-dot-make-meta-ignore_patterns+= ${SED_CMDS.meta-ignore} SED_CMDS.varname-dot-parsedir= -e '/in some cases/ s,^make: "[^"]*,make: "<normalized>,' SED_CMDS.varname-dot-parsefile= -e '/in some cases/ s,^make: "[^"]*,make: "<normalized>,' SED_CMDS.varname-dot-shell= -e 's, = /[^ ]*, = (details omitted),g' SED_CMDS.varname-dot-shell+= -e 's,"/[^" ]*","(details omitted)",g' SED_CMDS.varname-dot-shell+= -e 's,\[/[^] ]*\],[(details omitted)],g' SED_CMDS.varname-empty= ${.OBJDIR .PARSEDIR .PATH .SHELL .SYSPATH:L:@v@-e '/\\$v/d'@} # Some tests need an additional round of postprocessing. POSTPROC.depsrc-wait= sed -e '/^---/d' -e 's,^\(: Making 3[abc]\)[123]$$,\1,' POSTPROC.deptgt-suffixes= awk '/^\#\*\*\* Suffixes/,/^never-stop/' POSTPROC.gnode-submake= awk '/Input graph/, /^$$/' POSTPROC.varname-dot-make-mode= sed 's,^\(: Making [abc]\)[123]$$,\1,' # Some tests reuse other tests, which makes them unnecessarily fragile. export-all.rawout: export.mk unexport.rawout: export.mk unexport-env.rawout: export.mk # End of the configuration section. # Some standard sed commands, to be used in the SED_CMDS above. # In tests that use the debugging option -dd, ignore debugging output that is # only logged in -DCLEANUP mode. STD_SED_CMDS.dd= -e '/^OpenDirs_Done:/d' STD_SED_CMDS.dd+= -e '/^CachedDir /d' # Omit details such as process IDs from the output of the -dg1 option. STD_SED_CMDS.dg1= -e '/\#.* \.$$/d' STD_SED_CMDS.dg1+= -e '/\.MAKE.PATH_FILEMON/d' STD_SED_CMDS.dg1+= -e '/^\#.*\/mk/d' STD_SED_CMDS.dg1+= -e 's, ${DEFSYSPATH:U/usr/share/mk}$$, <defsyspath>,' STD_SED_CMDS.dg1+= -e 's,^\(\.MAKE *=\) .*,\1 <details omitted>,' STD_SED_CMDS.dg1+= -e 's,^\(\.MAKE\.[A-Z_]* *=\) .*,\1 <details omitted>,' STD_SED_CMDS.dg1+= -e 's,^\(MACHINE[_ARCH]* *=\) .*,\1 <details omitted>,' STD_SED_CMDS.dg1+= -e 's,^\(MAKE *=\) .*,\1 <details omitted>,' STD_SED_CMDS.dg1+= -e 's,^\(\.SHELL *=\) .*,\1 <details omitted>,' STD_SED_CMDS.dg1+= -e '/\.SYSPATH/d' STD_SED_CMDS.dg2= ${STD_SED_CMDS.dg1} STD_SED_CMDS.dg2+= -e 's,\(last modified\) ..:..:.. ... ..\, ....,\1 <timestamp>,' STD_SED_CMDS.dg3= ${STD_SED_CMDS.dg2} # Omit details such as process IDs from the output of the -dj option. STD_SED_CMDS.dj= \ -e '/Process/d;/JobFinish:/d' \ -e 's,^\(Job_TokenWithdraw\)([0-9]*),\1(<pid>),' \ -e 's,^([0-9][0-9]*) \(withdrew token\),(<pid>) \1,' \ -e 's, \(pid\) [0-9][0-9]*, \1 <pid>,' \ -e 's,^\( Command:\) .*,\1 <shell>,' # Reduce the noise for tests running with the -n option, since there is no # other way to suppress the echoing of the commands. STD_SED_CMDS.hide-from-output= \ -e '/^echo hide-from-output/d' \ -e 's,hide-from-output ,,' \ -e 's,hide-from-output,,' # Normalize the output for error messages from the shell. # # $shell -c '...' # NetBSD sh ...: not found # NetBSD ksh ksh: ...: not found # bash 5.0.18 bash: ...: command not found # bash 5.1.0 bash: line 1: ...: command not found # dash dash: 1: ...: not found # # $shell -c '< /nonexistent' # NetBSD sh sh: cannot open /nonexistent: no such file # NetBSD ksh ksh: cannot open /nonexistent: No such file or directory # bash 5.0.18 bash: /nonexistent: No such file or directory # bash 5.1.0 bash: line 1: /nonexistent: No such file or directory # dash dash: 1: cannot open /nonexistent: No such file # # echo '< /nonexistent' | $shell # NetBSD sh sh: cannot open /nonexistent: no such file # NetBSD ksh ksh: <stdin>[1]: cannot open /nonexistent: No such file or directory # bash 5.0.18 bash: line 1: /nonexistent: No such file or directory # bash 5.1.0 bash: line 1: /nonexistent: No such file or directory # dash dash: 1: cannot open /nonexistent: No such file # STD_SED_CMDS.shell+= -e 's,^${.SHELL},${.SHELL:T},' STD_SED_CMDS.shell+= -e 's,^${.SHELL:T}: line [0-9][0-9]*: ,,' STD_SED_CMDS.shell+= -e 's,^${.SHELL:T}: [0-9][0-9]*: ,,' STD_SED_CMDS.shell+= -e 's,^${.SHELL:T}: ,,' STD_SED_CMDS.shell+= -e 's,: command not found,: not found,' STD_SED_CMDS.white-space= -e 's, *, ,g' -e 's, *$$,,' # The actual error messages for a failed regcomp or regexec differ between the # implementations. STD_SED_CMDS.regex= \ -e 's,\(Regex compilation error:\).*,\1 (details omitted),' # Normalize timestamps from ':gmtime' or ':localtime' to '<timestamp>'. # See STD_SED_CMDS.dg2 for timestamps from the debug log. STD_SED_CMDS.timestamp= \ -e 's,[A-Z][a-z][a-z] [A-Z][a-z][a-z] [ 0-9][0-9] [0-9][0-9]:[0-9][0-9]:[0-9][0-9] [12][0-9][0-9][0-9],<timestamp>,' # End of the configuration helpers section. .sinclude "Makefile.inc" .sinclude "Makefile.config" UNIT_TESTS:= ${srcdir} .PATH: ${UNIT_TESTS} .if ${USE_ABSOLUTE_TESTNAMES:Uno} == yes OUTFILES= ${TESTS:@test@${.CURDIR:tA}/${test}.out@} .else OUTFILES= ${TESTS:=.out} .endif all: ${OUTFILES} CLEANFILES= *.rawout *.out *.status *.tmp *.core *.tmp CLEANFILES+= obj*.[och] lib*.a # posix1.mk CLEANFILES+= issue* .[ab]* # suffixes.mk CLEANDIRS= dir dummy # posix1.mk clean: rm -f ${CLEANFILES} rm -rf ${CLEANDIRS} TEST_MAKE?= ${.MAKE} TOOL_SED?= sed TOOL_TR?= tr TOOL_DIFF?= diff DIFF_FLAGS?= -u .if defined(.PARSEDIR) # ensure consistent results from sort(1) LC_ALL= C LANG= C .export LANG LC_ALL .endif .if ${.MAKE.MODE:Unormal:Mmeta} != "" # we don't need the noise _MKMSG_TEST= : .endif # Some Linux systems such as Fedora have deprecated egrep in favor of grep -E. .if ${.MAKE.OS:NLinux} == "" EGREP= grep -E .endif # Keep the classical definition for all other systems. Just as the bmake code # is kept compatible with C90, the tests are kept compatible with systems that # are several decades old and don't follow modern POSIX standards. EGREP?= egrep MAKE_TEST_ENV= EGREP="${EGREP}" MAKE_TEST_ENV+= MALLOC_OPTIONS="JA" # for jemalloc 100 MAKE_TEST_ENV+= MALLOC_CONF="junk:true" # for jemalloc 510 MAKE_TEST_ENV+= TMPDIR=${TMPDIR} .if ${.MAKE.OS} == "NetBSD" LIMIT_RESOURCES?= ulimit -v 300000 .endif LIMIT_RESOURCES?= : # Each test is run in a sub-make, to keep the tests from interfering with # each other, and because they use different environment variables and # command line options. .SUFFIXES: .mk .rawout .out .mk.rawout: @${_MKMSG_TEST:Uecho '# test '} ${.PREFIX} @set -eu; \ ${LIMIT_RESOURCES}; \ cd ${.OBJDIR}; \ env -i PATH="$$PATH" ${MAKE_TEST_ENV} ${ENV.${.PREFIX:T}} \ ${TEST_MAKE} \ -r -C ${.CURDIR} -f ${.IMPSRC} \ ${FLAGS.${.PREFIX:T}:U-k} \ > ${.TARGET}.tmp 2>&1 \ && status=$$? || status=$$?; \ echo $$status > ${.TARGET:R}.status @mv ${.TARGET}.tmp ${.TARGET} # Postprocess the test output to make the output platform-independent. # # Replace anything after 'stopped in' with unit-tests _SED_CMDS+= -e '/stopped/s, /.*, unit-tests,' # Allow the test files to be placed anywhere. _SED_CMDS+= -e 's,\(\.PARSEDIR}\) = `'"/[^']*'"',\1 = <some-dir>,' _SED_CMDS+= -e 's,\(\.INCLUDEDFROMDIR}\) = `'"/[^']*'"',\1 = <some-dir>,' _SED_CMDS+= -e 's,${TMPDIR},<tmpdir>,g' -e 's,${TMPDIR:tA},<tmpdir>,g' # canonicalize ${.OBJDIR} and ${.CURDIR} _SED_CMDS+= -e 's,${.CURDIR},<curdir>,g' .if ${.OBJDIR} != ${.CURDIR} # yes this is inaccurate but none of the tests expect <objdir> anywhere # which we get depending on how MAKEOBJDIR is set. _SED_CMDS+= -e 's,${.OBJDIR},<curdir>,g' -e 's,${.OBJDIR:tA},<curdir>,g' .endif # always pretend .MAKE was called 'make' _SED_CMDS+= -e 's,^${TEST_MAKE:T:S,.,\\.,g}[][0-9]*:,make:,' _SED_CMDS+= -e 's,${TEST_MAKE:S,.,\\.,g},make,' _SED_CMDS+= -e 's,^usage: ${TEST_MAKE:T:S,.,\\.,g} ,usage: make ,' _SED_CMDS+= -e 's,<curdir>/,,g' _SED_CMDS+= -e 's,${UNIT_TESTS:S,.,\\.,g}/,,g' _SED_CMDS+= -e '/MAKE_VERSION/d' _SED_CMDS+= -e '/EGREP=/d' # on AT&T derived systems: false exits 255 not 1 .if ${.MAKE.OS:N*BSD} != "" _SED_CMDS+= -e 's,\(Error code\) 255,\1 1,' .endif .if ${.SHELL:T} == "ksh" _SED_CMDS+= -e '/^set [+-]v/d' .endif .rawout.out: @${TOOL_SED} ${_SED_CMDS} ${SED_CMDS.${.PREFIX:T}} \ < ${.IMPSRC} > ${.TARGET}.tmp1 @${POSTPROC.${.PREFIX:T}:Ucat} < ${.TARGET}.tmp1 > ${.TARGET}.tmp2 @rm ${.TARGET}.tmp1 @echo "exit status `cat ${.TARGET:R}.status`" >> ${.TARGET}.tmp2 @mv ${.TARGET}.tmp2 ${.TARGET} .if empty(DIFF_FLAGS) DIFF_ECHO= echo .else DIFF_ECHO= : .endif # Compare all output files test: ${OUTFILES} .PHONY @failed= ; \ for test in ${TESTS}; do \ cmp -s ${UNIT_TESTS}/$${test}.exp $${test}.out && continue || \ ${DIFF_ECHO} diff ${UNIT_TESTS}/$${test}.exp $${test}.out; \ ${TOOL_DIFF} ${DIFF_FLAGS} ${UNIT_TESTS}/$${test}.exp $${test}.out \ || failed="$${failed}$${failed:+ }$${test}" ; \ done ; \ if [ -n "$${failed}" ]; then \ echo "Failed tests: $${failed}" ; false ; \ else \ echo "All tests passed" ; \ fi accept: @for test in ${TESTS}; do \ cmp -s ${UNIT_TESTS}/$${test}.exp $${test}.out \ || { echo "Replacing $${test}.exp" ; \ cp $${test}.out ${UNIT_TESTS}/$${test}.exp ; } \ done .if exists(${TEST_MAKE}) ${TESTS:=.rawout}: ${TEST_MAKE} # in meta mode, we *know* if a target script is impacted # by a makefile change. .if ${.MAKE.MODE:Unormal:Mmeta} == "" ${TESTS:=.rawout}: ${.PARSEDIR}/Makefile .endif .endif .sinclude <bsd.obj.mk>