/*- * Copyright (c) 1997-2007 Kenneth D. Merry * Copyright (c) 2013, 2014, 2015 Spectra Logic Corporation * All rights reserved. * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions * are met: * 1. Redistributions of source code must retain the above copyright * notice, this list of conditions, and the following disclaimer, * without modification. * 2. Redistributions in binary form must reproduce at minimum a disclaimer * substantially similar to the "NO WARRANTY" disclaimer below * ("Disclaimer") and any redistribution must be conditioned upon * including a substantially similar Disclaimer requirement for further * binary redistribution. * * NO WARRANTY * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGES. * * Authors: Ken Merry (Spectra Logic Corporation) */ /* * This is eventually intended to be: * - A basic data transfer/copy utility * - A simple benchmark utility * - An example of how to use the asynchronous pass(4) driver interface. */ #include <sys/cdefs.h> #include <sys/ioctl.h> #include <sys/stdint.h> #include <sys/types.h> #include <sys/endian.h> #include <sys/param.h> #include <sys/sbuf.h> #include <sys/stat.h> #include <sys/event.h> #include <sys/time.h> #include <sys/uio.h> #include <vm/vm.h> #include <sys/bus.h> #include <sys/bus_dma.h> #include <sys/mtio.h> #include <sys/conf.h> #include <sys/disk.h> #include <stdio.h> #include <stdlib.h> #include <semaphore.h> #include <string.h> #include <unistd.h> #include <inttypes.h> #include <limits.h> #include <fcntl.h> #include <ctype.h> #include <err.h> #include <libutil.h> #include <pthread.h> #include <assert.h> #include <bsdxml.h> #include <cam/cam.h> #include <cam/cam_debug.h> #include <cam/cam_ccb.h> #include <cam/scsi/scsi_all.h> #include <cam/scsi/scsi_da.h> #include <cam/scsi/scsi_pass.h> #include <cam/scsi/scsi_message.h> #include <cam/scsi/smp_all.h> #include <cam/nvme/nvme_all.h> #include <camlib.h> #include <mtlib.h> #include <zlib.h> typedef enum { CAMDD_CMD_NONE = 0x00000000, CAMDD_CMD_HELP = 0x00000001, CAMDD_CMD_WRITE = 0x00000002, CAMDD_CMD_READ = 0x00000003 } camdd_cmdmask; typedef enum { CAMDD_ARG_NONE = 0x00000000, CAMDD_ARG_VERBOSE = 0x00000001, CAMDD_ARG_ERR_RECOVER = 0x00000080, } camdd_argmask; typedef enum { CAMDD_DEV_NONE = 0x00, CAMDD_DEV_PASS = 0x01, CAMDD_DEV_FILE = 0x02 } camdd_dev_type; struct camdd_io_opts { camdd_dev_type dev_type; char *dev_name; uint64_t blocksize; uint64_t queue_depth; uint64_t offset; int min_cmd_size; int write_dev; uint64_t debug; }; typedef enum { CAMDD_BUF_NONE, CAMDD_BUF_DATA, CAMDD_BUF_INDIRECT } camdd_buf_type; struct camdd_buf_indirect { /* * Pointer to the source buffer. */ struct camdd_buf *src_buf; /* * Offset into the source buffer, in bytes. */ uint64_t offset; /* * Pointer to the starting point in the source buffer. */ uint8_t *start_ptr; /* * Length of this chunk in bytes. */ size_t len; }; struct camdd_buf_data { /* * Buffer allocated when we allocate this camdd_buf. This should * be the size of the blocksize for this device. */ uint8_t *buf; /* * The amount of backing store allocated in buf. Generally this * will be the blocksize of the device. */ uint32_t alloc_len; /* * The amount of data that was put into the buffer (on reads) or * the amount of data we have put onto the src_list so far (on * writes). */ uint32_t fill_len; /* * The amount of data that was not transferred. */ uint32_t resid; /* * Starting byte offset on the reader. */ uint64_t src_start_offset; /* * CCB used for pass(4) device targets. */ union ccb ccb; /* * Number of scatter/gather segments. */ int sg_count; /* * Set if we had to tack on an extra buffer to round the transfer * up to a sector size. */ int extra_buf; /* * Scatter/gather list used generally when we're the writer for a * pass(4) device. */ bus_dma_segment_t *segs; /* * Scatter/gather list used generally when we're the writer for a * file or block device; */ struct iovec *iovec; }; union camdd_buf_types { struct camdd_buf_indirect indirect; struct camdd_buf_data data; }; typedef enum { CAMDD_STATUS_NONE, CAMDD_STATUS_OK, CAMDD_STATUS_SHORT_IO, CAMDD_STATUS_EOF, CAMDD_STATUS_ERROR } camdd_buf_status; struct camdd_buf { camdd_buf_type buf_type; union camdd_buf_types buf_type_spec; camdd_buf_status status; uint64_t lba; size_t len; /* * A reference count of how many indirect buffers point to this * buffer. */ int refcount; /* * A link back to our parent device. */ struct camdd_dev *dev; STAILQ_ENTRY(camdd_buf) links; STAILQ_ENTRY(camdd_buf) work_links; /* * A count of the buffers on the src_list. */ int src_count; /* * List of buffers from our partner thread that are the components * of this buffer for the I/O. Uses src_links. */ STAILQ_HEAD(,camdd_buf) src_list; STAILQ_ENTRY(camdd_buf) src_links; }; #define NUM_DEV_TYPES 2 struct camdd_dev_pass { int scsi_dev_type; int protocol; struct cam_device *dev; uint64_t max_sector; uint32_t block_len; uint32_t cpi_maxio; }; typedef enum { CAMDD_FILE_NONE, CAMDD_FILE_REG, CAMDD_FILE_STD, CAMDD_FILE_PIPE, CAMDD_FILE_DISK, CAMDD_FILE_TAPE, CAMDD_FILE_TTY, CAMDD_FILE_MEM } camdd_file_type; typedef enum { CAMDD_FF_NONE = 0x00, CAMDD_FF_CAN_SEEK = 0x01 } camdd_file_flags; struct camdd_dev_file { int fd; struct stat sb; char filename[MAXPATHLEN + 1]; camdd_file_type file_type; camdd_file_flags file_flags; uint8_t *tmp_buf; }; struct camdd_dev_block { int fd; uint64_t size_bytes; uint32_t block_len; }; union camdd_dev_spec { struct camdd_dev_pass pass; struct camdd_dev_file file; struct camdd_dev_block block; }; typedef enum { CAMDD_DEV_FLAG_NONE = 0x00, CAMDD_DEV_FLAG_EOF = 0x01, CAMDD_DEV_FLAG_PEER_EOF = 0x02, CAMDD_DEV_FLAG_ACTIVE = 0x04, CAMDD_DEV_FLAG_EOF_SENT = 0x08, CAMDD_DEV_FLAG_EOF_QUEUED = 0x10 } camdd_dev_flags; struct camdd_dev { camdd_dev_type dev_type; union camdd_dev_spec dev_spec; camdd_dev_flags flags; char device_name[MAXPATHLEN+1]; uint32_t blocksize; uint32_t sector_size; uint64_t max_sector; uint64_t sector_io_limit; int min_cmd_size; int write_dev; int retry_count; int io_timeout; int debug; uint64_t start_offset_bytes; uint64_t next_io_pos_bytes; uint64_t next_peer_pos_bytes; uint64_t next_completion_pos_bytes; uint64_t peer_bytes_queued; uint64_t bytes_transferred; uint32_t target_queue_depth; uint32_t cur_active_io; uint8_t *extra_buf; uint32_t extra_buf_len; struct camdd_dev *peer_dev; pthread_mutex_t mutex; pthread_cond_t cond; int kq; int (*run)(struct camdd_dev *dev); int (*fetch)(struct camdd_dev *dev); /* * Buffers that are available for I/O. Uses links. */ STAILQ_HEAD(,camdd_buf) free_queue; /* * Free indirect buffers. These are used for breaking a large * buffer into multiple pieces. */ STAILQ_HEAD(,camdd_buf) free_indirect_queue; /* * Buffers that have been queued to the kernel. Uses links. */ STAILQ_HEAD(,camdd_buf) active_queue; /* * Will generally contain one of our buffers that is waiting for enough * I/O from our partner thread to be able to execute. This will * generally happen when our per-I/O-size is larger than the * partner thread's per-I/O-size. Uses links. */ STAILQ_HEAD(,camdd_buf) pending_queue; /* * Number of buffers on the pending queue */ int num_pending_queue; /* * Buffers that are filled and ready to execute. This is used when * our partner (reader) thread sends us blocks that are larger than * our blocksize, and so we have to split them into multiple pieces. */ STAILQ_HEAD(,camdd_buf) run_queue; /* * Number of buffers on the run queue. */ int num_run_queue; STAILQ_HEAD(,camdd_buf) reorder_queue; int num_reorder_queue; /* * Buffers that have been queued to us by our partner thread * (generally the reader thread) to be written out. Uses * work_links. */ STAILQ_HEAD(,camdd_buf) work_queue; /* * Buffers that have been completed by our partner thread. Uses * work_links. */ STAILQ_HEAD(,camdd_buf) peer_done_queue; /* * Number of buffers on the peer done queue. */ uint32_t num_peer_done_queue; /* * A list of buffers that we have queued to our peer thread. Uses * links. */ STAILQ_HEAD(,camdd_buf) peer_work_queue; /* * Number of buffers on the peer work queue. */ uint32_t num_peer_work_queue; }; static sem_t camdd_sem; static sig_atomic_t need_exit = 0; static sig_atomic_t error_exit = 0; static sig_atomic_t need_status = 0; #ifndef min #define min(a, b) (a < b) ? a : b #endif /* Generically useful offsets into the peripheral private area */ #define ppriv_ptr0 periph_priv.entries[0].ptr #define ppriv_ptr1 periph_priv.entries[1].ptr #define ppriv_field0 periph_priv.entries[0].field #define ppriv_field1 periph_priv.entries[1].field #define ccb_buf ppriv_ptr0 #define CAMDD_FILE_DEFAULT_BLOCK 524288 #define CAMDD_FILE_DEFAULT_DEPTH 1 #define CAMDD_PASS_MAX_BLOCK 1048576 #define CAMDD_PASS_DEFAULT_DEPTH 6 #define CAMDD_PASS_RW_TIMEOUT 60 * 1000 static int parse_btl(char *tstr, int *bus, int *target, int *lun); void camdd_free_dev(struct camdd_dev *dev); struct camdd_dev *camdd_alloc_dev(camdd_dev_type dev_type, struct kevent *new_ke, int num_ke, int retry_count, int timeout); static struct camdd_buf *camdd_alloc_buf(struct camdd_dev *dev, camdd_buf_type buf_type); void camdd_release_buf(struct camdd_buf *buf); struct camdd_buf *camdd_get_buf(struct camdd_dev *dev, camdd_buf_type buf_type); int camdd_buf_sg_create(struct camdd_buf *buf, int iovec, uint32_t sector_size, uint32_t *num_sectors_used, int *double_buf_needed); uint32_t camdd_buf_get_len(struct camdd_buf *buf); void camdd_buf_add_child(struct camdd_buf *buf, struct camdd_buf *child_buf); int camdd_probe_tape(int fd, char *filename, uint64_t *max_iosize, uint64_t *max_blk, uint64_t *min_blk, uint64_t *blk_gran); int camdd_probe_pass_scsi(struct cam_device *cam_dev, union ccb *ccb, camdd_argmask arglist, int probe_retry_count, int probe_timeout, uint64_t *maxsector, uint32_t *block_len); int camdd_probe_pass_nvme(struct cam_device *cam_dev, union ccb *ccb, camdd_argmask arglist, int probe_retry_count, int probe_timeout, uint64_t *maxsector, uint32_t *block_len); struct camdd_dev *camdd_probe_file(int fd, struct camdd_io_opts *io_opts, int retry_count, int timeout); struct camdd_dev *camdd_probe_pass(struct cam_device *cam_dev, struct camdd_io_opts *io_opts, camdd_argmask arglist, int probe_retry_count, int probe_timeout, int io_retry_count, int io_timeout); void nvme_read_write(struct ccb_nvmeio *nvmeio, uint32_t retries, void (*cbfcnp)(struct cam_periph *, union ccb *), uint32_t nsid, int readop, uint64_t lba, uint32_t block_count, uint8_t *data_ptr, uint32_t dxfer_len, uint32_t timeout); void *camdd_file_worker(void *arg); camdd_buf_status camdd_ccb_status(union ccb *ccb, int protocol); int camdd_get_cgd(struct cam_device *device, struct ccb_getdev *cgd); int camdd_queue_peer_buf(struct camdd_dev *dev, struct camdd_buf *buf); int camdd_complete_peer_buf(struct camdd_dev *dev, struct camdd_buf *peer_buf); void camdd_peer_done(struct camdd_buf *buf); void camdd_complete_buf(struct camdd_dev *dev, struct camdd_buf *buf, int *error_count); int camdd_pass_fetch(struct camdd_dev *dev); int camdd_file_run(struct camdd_dev *dev); int camdd_pass_run(struct camdd_dev *dev); int camdd_get_next_lba_len(struct camdd_dev *dev, uint64_t *lba, ssize_t *len); int camdd_queue(struct camdd_dev *dev, struct camdd_buf *read_buf); void camdd_get_depth(struct camdd_dev *dev, uint32_t *our_depth, uint32_t *peer_depth, uint32_t *our_bytes, uint32_t *peer_bytes); void *camdd_worker(void *arg); void camdd_sig_handler(int sig); void camdd_print_status(struct camdd_dev *camdd_dev, struct camdd_dev *other_dev, struct timespec *start_time); int camdd_rw(struct camdd_io_opts *io_opts, camdd_argmask arglist, int num_io_opts, uint64_t max_io, int retry_count, int timeout); int camdd_parse_io_opts(char *args, int is_write, struct camdd_io_opts *io_opts); void usage(void); /* * Parse out a bus, or a bus, target and lun in the following * format: * bus * bus:target * bus:target:lun * * Returns the number of parsed components, or 0. */ static int parse_btl(char *tstr, int *bus, int *target, int *lun) { char *tmpstr; int convs = 0; while (isspace(*tstr) && (*tstr != '\0')) tstr++; tmpstr = (char *)strtok(tstr, ":"); if ((tmpstr != NULL) && (*tmpstr != '\0')) { *bus = strtol(tmpstr, NULL, 0); convs++; tmpstr = (char *)strtok(NULL, ":"); if ((tmpstr != NULL) && (*tmpstr != '\0')) { *target = strtol(tmpstr, NULL, 0); convs++; tmpstr = (char *)strtok(NULL, ":"); if ((tmpstr != NULL) && (*tmpstr != '\0')) { *lun = strtol(tmpstr, NULL, 0); convs++; } } } return convs; } /* * XXX KDM clean up and free all of the buffers on the queue! */ void camdd_free_dev(struct camdd_dev *dev) { if (dev == NULL) return; switch (dev->dev_type) { case CAMDD_DEV_FILE: { struct camdd_dev_file *file_dev = &dev->dev_spec.file; if (file_dev->fd != -1) close(file_dev->fd); free(file_dev->tmp_buf); break; } case CAMDD_DEV_PASS: { struct camdd_dev_pass *pass_dev = &dev->dev_spec.pass; if (pass_dev->dev != NULL) cam_close_device(pass_dev->dev); break; } default: break; } free(dev); } struct camdd_dev * camdd_alloc_dev(camdd_dev_type dev_type, struct kevent *new_ke, int num_ke, int retry_count, int timeout) { struct camdd_dev *dev = NULL; struct kevent *ke; size_t ke_size; int retval = 0; dev = calloc(1, sizeof(*dev)); if (dev == NULL) { warn("%s: unable to malloc %zu bytes", __func__, sizeof(*dev)); goto bailout; } dev->dev_type = dev_type; dev->io_timeout = timeout; dev->retry_count = retry_count; STAILQ_INIT(&dev->free_queue); STAILQ_INIT(&dev->free_indirect_queue); STAILQ_INIT(&dev->active_queue); STAILQ_INIT(&dev->pending_queue); STAILQ_INIT(&dev->run_queue); STAILQ_INIT(&dev->reorder_queue); STAILQ_INIT(&dev->work_queue); STAILQ_INIT(&dev->peer_done_queue); STAILQ_INIT(&dev->peer_work_queue); retval = pthread_mutex_init(&dev->mutex, NULL); if (retval != 0) { warnc(retval, "%s: failed to initialize mutex", __func__); goto bailout; } retval = pthread_cond_init(&dev->cond, NULL); if (retval != 0) { warnc(retval, "%s: failed to initialize condition variable", __func__); goto bailout; } dev->kq = kqueue(); if (dev->kq == -1) { warn("%s: Unable to create kqueue", __func__); goto bailout; } ke_size = sizeof(struct kevent) * (num_ke + 4); ke = calloc(1, ke_size); if (ke == NULL) { warn("%s: unable to malloc %zu bytes", __func__, ke_size); goto bailout; } if (num_ke > 0) bcopy(new_ke, ke, num_ke * sizeof(struct kevent)); EV_SET(&ke[num_ke++], (uintptr_t)&dev->work_queue, EVFILT_USER, EV_ADD|EV_ENABLE|EV_CLEAR, 0,0, 0); EV_SET(&ke[num_ke++], (uintptr_t)&dev->peer_done_queue, EVFILT_USER, EV_ADD|EV_ENABLE|EV_CLEAR, 0,0, 0); EV_SET(&ke[num_ke++], SIGINFO, EVFILT_SIGNAL, EV_ADD|EV_ENABLE, 0,0,0); EV_SET(&ke[num_ke++], SIGINT, EVFILT_SIGNAL, EV_ADD|EV_ENABLE, 0,0,0); retval = kevent(dev->kq, ke, num_ke, NULL, 0, NULL); if (retval == -1) { warn("%s: Unable to register kevents", __func__); goto bailout; } return (dev); bailout: free(dev); return (NULL); } static struct camdd_buf * camdd_alloc_buf(struct camdd_dev *dev, camdd_buf_type buf_type) { struct camdd_buf *buf = NULL; uint8_t *data_ptr = NULL; /* * We only need to allocate data space for data buffers. */ switch (buf_type) { case CAMDD_BUF_DATA: data_ptr = malloc(dev->blocksize); if (data_ptr == NULL) { warn("unable to allocate %u bytes", dev->blocksize); goto bailout_error; } break; default: break; } buf = calloc(1, sizeof(*buf)); if (buf == NULL) { warn("unable to allocate %zu bytes", sizeof(*buf)); goto bailout_error; } buf->buf_type = buf_type; buf->dev = dev; switch (buf_type) { case CAMDD_BUF_DATA: { struct camdd_buf_data *data; data = &buf->buf_type_spec.data; data->alloc_len = dev->blocksize; data->buf = data_ptr; break; } case CAMDD_BUF_INDIRECT: break; default: break; } STAILQ_INIT(&buf->src_list); return (buf); bailout_error: free(data_ptr); return (NULL); } void camdd_release_buf(struct camdd_buf *buf) { struct camdd_dev *dev; dev = buf->dev; switch (buf->buf_type) { case CAMDD_BUF_DATA: { struct camdd_buf_data *data; data = &buf->buf_type_spec.data; if (data->segs != NULL) { if (data->extra_buf != 0) { void *extra_buf; extra_buf = (void *) data->segs[data->sg_count - 1].ds_addr; free(extra_buf); data->extra_buf = 0; } free(data->segs); data->segs = NULL; data->sg_count = 0; } else if (data->iovec != NULL) { if (data->extra_buf != 0) { free(data->iovec[data->sg_count - 1].iov_base); data->extra_buf = 0; } free(data->iovec); data->iovec = NULL; data->sg_count = 0; } STAILQ_INSERT_TAIL(&dev->free_queue, buf, links); break; } case CAMDD_BUF_INDIRECT: STAILQ_INSERT_TAIL(&dev->free_indirect_queue, buf, links); break; default: err(1, "%s: Invalid buffer type %d for released buffer", __func__, buf->buf_type); break; } } struct camdd_buf * camdd_get_buf(struct camdd_dev *dev, camdd_buf_type buf_type) { struct camdd_buf *buf = NULL; switch (buf_type) { case CAMDD_BUF_DATA: buf = STAILQ_FIRST(&dev->free_queue); if (buf != NULL) { struct camdd_buf_data *data; uint8_t *data_ptr; uint32_t alloc_len; STAILQ_REMOVE_HEAD(&dev->free_queue, links); data = &buf->buf_type_spec.data; data_ptr = data->buf; alloc_len = data->alloc_len; bzero(buf, sizeof(*buf)); data->buf = data_ptr; data->alloc_len = alloc_len; } break; case CAMDD_BUF_INDIRECT: buf = STAILQ_FIRST(&dev->free_indirect_queue); if (buf != NULL) { STAILQ_REMOVE_HEAD(&dev->free_indirect_queue, links); bzero(buf, sizeof(*buf)); } break; default: warnx("Unknown buffer type %d requested", buf_type); break; } if (buf == NULL) return (camdd_alloc_buf(dev, buf_type)); else { STAILQ_INIT(&buf->src_list); buf->dev = dev; buf->buf_type = buf_type; return (buf); } } int camdd_buf_sg_create(struct camdd_buf *buf, int iovec, uint32_t sector_size, uint32_t *num_sectors_used, int *double_buf_needed) { struct camdd_buf *tmp_buf; struct camdd_buf_data *data; uint8_t *extra_buf = NULL; size_t extra_buf_len = 0; int extra_buf_attached = 0; int i, retval = 0; data = &buf->buf_type_spec.data; data->sg_count = buf->src_count; /* * Compose a scatter/gather list from all of the buffers in the list. * If the length of the buffer isn't a multiple of the sector size, * we'll have to add an extra buffer. This should only happen * at the end of a transfer. */ if ((data->fill_len % sector_size) != 0) { extra_buf_len = sector_size - (data->fill_len % sector_size); extra_buf = calloc(extra_buf_len, 1); if (extra_buf == NULL) { warn("%s: unable to allocate %zu bytes for extra " "buffer space", __func__, extra_buf_len); retval = 1; goto bailout; } data->extra_buf = 1; data->sg_count++; } if (iovec == 0) { data->segs = calloc(data->sg_count, sizeof(bus_dma_segment_t)); if (data->segs == NULL) { warn("%s: unable to allocate %zu bytes for S/G list", __func__, sizeof(bus_dma_segment_t) * data->sg_count); retval = 1; goto bailout; } } else { data->iovec = calloc(data->sg_count, sizeof(struct iovec)); if (data->iovec == NULL) { warn("%s: unable to allocate %zu bytes for S/G list", __func__, sizeof(struct iovec) * data->sg_count); retval = 1; goto bailout; } } for (i = 0, tmp_buf = STAILQ_FIRST(&buf->src_list); i < buf->src_count && tmp_buf != NULL; i++, tmp_buf = STAILQ_NEXT(tmp_buf, src_links)) { if (tmp_buf->buf_type == CAMDD_BUF_DATA) { struct camdd_buf_data *tmp_data; tmp_data = &tmp_buf->buf_type_spec.data; if (iovec == 0) { data->segs[i].ds_addr = (bus_addr_t) tmp_data->buf; data->segs[i].ds_len = tmp_data->fill_len - tmp_data->resid; } else { data->iovec[i].iov_base = tmp_data->buf; data->iovec[i].iov_len = tmp_data->fill_len - tmp_data->resid; } if (((tmp_data->fill_len - tmp_data->resid) % sector_size) != 0) *double_buf_needed = 1; } else { struct camdd_buf_indirect *tmp_ind; tmp_ind = &tmp_buf->buf_type_spec.indirect; if (iovec == 0) { data->segs[i].ds_addr = (bus_addr_t)tmp_ind->start_ptr; data->segs[i].ds_len = tmp_ind->len; } else { data->iovec[i].iov_base = tmp_ind->start_ptr; data->iovec[i].iov_len = tmp_ind->len; } if ((tmp_ind->len % sector_size) != 0) *double_buf_needed = 1; } } if (extra_buf != NULL) { if (iovec == 0) { data->segs[i].ds_addr = (bus_addr_t)extra_buf; data->segs[i].ds_len = extra_buf_len; } else { data->iovec[i].iov_base = extra_buf; data->iovec[i].iov_len = extra_buf_len; } extra_buf_attached = 1; i++; } if ((tmp_buf != NULL) || (i != data->sg_count)) { warnx("buffer source count does not match " "number of buffers in list!"); retval = 1; goto bailout; } bailout: if (retval == 0) { *num_sectors_used = (data->fill_len + extra_buf_len) / sector_size; } else if (extra_buf_attached == 0) { /* * If extra_buf isn't attached yet, we need to free it * to avoid leaking. */ free(extra_buf); data->extra_buf = 0; data->sg_count--; } return (retval); } uint32_t camdd_buf_get_len(struct camdd_buf *buf) { uint32_t len = 0; if (buf->buf_type != CAMDD_BUF_DATA) { struct camdd_buf_indirect *indirect; indirect = &buf->buf_type_spec.indirect; len = indirect->len; } else { struct camdd_buf_data *data; data = &buf->buf_type_spec.data; len = data->fill_len; } return (len); } void camdd_buf_add_child(struct camdd_buf *buf, struct camdd_buf *child_buf) { struct camdd_buf_data *data; assert(buf->buf_type == CAMDD_BUF_DATA); data = &buf->buf_type_spec.data; STAILQ_INSERT_TAIL(&buf->src_list, child_buf, src_links); buf->src_count++; data->fill_len += camdd_buf_get_len(child_buf); } typedef enum { CAMDD_TS_MAX_BLK, CAMDD_TS_MIN_BLK, CAMDD_TS_BLK_GRAN, CAMDD_TS_EFF_IOSIZE } camdd_status_item_index; static struct camdd_status_items { const char *name; struct mt_status_entry *entry; } req_status_items[] = { { "max_blk", NULL }, { "min_blk", NULL }, { "blk_gran", NULL }, { "max_effective_iosize", NULL } }; int camdd_probe_tape(int fd, char *filename, uint64_t *max_iosize, uint64_t *max_blk, uint64_t *min_blk, uint64_t *blk_gran) { struct mt_status_data status_data; char *xml_str = NULL; unsigned int i; int retval = 0; retval = mt_get_xml_str(fd, MTIOCEXTGET, &xml_str); if (retval != 0) err(1, "Couldn't get XML string from %s", filename); retval = mt_get_status(xml_str, &status_data); if (retval != XML_STATUS_OK) { warn("couldn't get status for %s", filename); retval = 1; goto bailout; } else retval = 0; if (status_data.error != 0) { warnx("%s", status_data.error_str); retval = 1; goto bailout; } for (i = 0; i < nitems(req_status_items); i++) { char *name; name = __DECONST(char *, req_status_items[i].name); req_status_items[i].entry = mt_status_entry_find(&status_data, name); if (req_status_items[i].entry == NULL) { errx(1, "Cannot find status entry %s", req_status_items[i].name); } } *max_iosize = req_status_items[CAMDD_TS_EFF_IOSIZE].entry->value_unsigned; *max_blk= req_status_items[CAMDD_TS_MAX_BLK].entry->value_unsigned; *min_blk= req_status_items[CAMDD_TS_MIN_BLK].entry->value_unsigned; *blk_gran = req_status_items[CAMDD_TS_BLK_GRAN].entry->value_unsigned; bailout: free(xml_str); mt_status_free(&status_data); return (retval); } struct camdd_dev * camdd_probe_file(int fd, struct camdd_io_opts *io_opts, int retry_count, int timeout) { struct camdd_dev *dev = NULL; struct camdd_dev_file *file_dev; uint64_t blocksize = io_opts->blocksize; dev = camdd_alloc_dev(CAMDD_DEV_FILE, NULL, 0, retry_count, timeout); if (dev == NULL) goto bailout; file_dev = &dev->dev_spec.file; file_dev->fd = fd; strlcpy(file_dev->filename, io_opts->dev_name, sizeof(file_dev->filename)); strlcpy(dev->device_name, io_opts->dev_name, sizeof(dev->device_name)); if (blocksize == 0) dev->blocksize = CAMDD_FILE_DEFAULT_BLOCK; else dev->blocksize = blocksize; if ((io_opts->queue_depth != 0) && (io_opts->queue_depth != 1)) { warnx("Queue depth %ju for %s ignored, only 1 outstanding " "command supported", (uintmax_t)io_opts->queue_depth, io_opts->dev_name); } dev->target_queue_depth = CAMDD_FILE_DEFAULT_DEPTH; dev->run = camdd_file_run; dev->fetch = NULL; /* * We can effectively access files on byte boundaries. We'll reset * this for devices like disks that can be accessed on sector * boundaries. */ dev->sector_size = 1; if ((fd != STDIN_FILENO) && (fd != STDOUT_FILENO)) { int retval; retval = fstat(fd, &file_dev->sb); if (retval != 0) { warn("Cannot stat %s", dev->device_name); goto bailout_error; } if (S_ISREG(file_dev->sb.st_mode)) { file_dev->file_type = CAMDD_FILE_REG; } else if (S_ISCHR(file_dev->sb.st_mode)) { int type; if (ioctl(fd, FIODTYPE, &type) == -1) err(1, "FIODTYPE ioctl failed on %s", dev->device_name); else { if (type & D_TAPE) file_dev->file_type = CAMDD_FILE_TAPE; else if (type & D_DISK) file_dev->file_type = CAMDD_FILE_DISK; else if (type & D_MEM) file_dev->file_type = CAMDD_FILE_MEM; else if (type & D_TTY) file_dev->file_type = CAMDD_FILE_TTY; } } else if (S_ISDIR(file_dev->sb.st_mode)) { errx(1, "cannot operate on directory %s", dev->device_name); } else if (S_ISFIFO(file_dev->sb.st_mode)) { file_dev->file_type = CAMDD_FILE_PIPE; } else errx(1, "Cannot determine file type for %s", dev->device_name); switch (file_dev->file_type) { case CAMDD_FILE_REG: if (file_dev->sb.st_size != 0) dev->max_sector = file_dev->sb.st_size - 1; else dev->max_sector = 0; file_dev->file_flags |= CAMDD_FF_CAN_SEEK; break; case CAMDD_FILE_TAPE: { uint64_t max_iosize, max_blk, min_blk, blk_gran; /* * Check block limits and maximum effective iosize. * Make sure the blocksize is within the block * limits (and a multiple of the minimum blocksize) * and that the blocksize is <= maximum effective * iosize. */ retval = camdd_probe_tape(fd, dev->device_name, &max_iosize, &max_blk, &min_blk, &blk_gran); if (retval != 0) errx(1, "Unable to probe tape %s", dev->device_name); /* * The blocksize needs to be <= the maximum * effective I/O size of the tape device. Note * that this also takes into account the maximum * blocksize reported by READ BLOCK LIMITS. */ if (dev->blocksize > max_iosize) { warnx("Blocksize %u too big for %s, limiting " "to %ju", dev->blocksize, dev->device_name, max_iosize); dev->blocksize = max_iosize; } /* * The blocksize needs to be at least min_blk; */ if (dev->blocksize < min_blk) { warnx("Blocksize %u too small for %s, " "increasing to %ju", dev->blocksize, dev->device_name, min_blk); dev->blocksize = min_blk; } /* * And the blocksize needs to be a multiple of * the block granularity. */ if ((blk_gran != 0) && (dev->blocksize % (1 << blk_gran))) { warnx("Blocksize %u for %s not a multiple of " "%d, adjusting to %d", dev->blocksize, dev->device_name, (1 << blk_gran), dev->blocksize & ~((1 << blk_gran) - 1)); dev->blocksize &= ~((1 << blk_gran) - 1); } if (dev->blocksize == 0) { errx(1, "Unable to derive valid blocksize for " "%s", dev->device_name); } /* * For tape drives, set the sector size to the * blocksize so that we make sure not to write * less than the blocksize out to the drive. */ dev->sector_size = dev->blocksize; break; } case CAMDD_FILE_DISK: { off_t media_size; unsigned int sector_size; file_dev->file_flags |= CAMDD_FF_CAN_SEEK; if (ioctl(fd, DIOCGSECTORSIZE, &sector_size) == -1) { err(1, "DIOCGSECTORSIZE ioctl failed on %s", dev->device_name); } if (sector_size == 0) { errx(1, "DIOCGSECTORSIZE ioctl returned " "invalid sector size %u for %s", sector_size, dev->device_name); } if (ioctl(fd, DIOCGMEDIASIZE, &media_size) == -1) { err(1, "DIOCGMEDIASIZE ioctl failed on %s", dev->device_name); } if (media_size == 0) { errx(1, "DIOCGMEDIASIZE ioctl returned " "invalid media size %ju for %s", (uintmax_t)media_size, dev->device_name); } if (dev->blocksize % sector_size) { errx(1, "%s blocksize %u not a multiple of " "sector size %u", dev->device_name, dev->blocksize, sector_size); } dev->sector_size = sector_size; dev->max_sector = (media_size / sector_size) - 1; break; } case CAMDD_FILE_MEM: file_dev->file_flags |= CAMDD_FF_CAN_SEEK; break; default: break; } } if ((io_opts->offset != 0) && ((file_dev->file_flags & CAMDD_FF_CAN_SEEK) == 0)) { warnx("Offset %ju specified for %s, but we cannot seek on %s", io_opts->offset, io_opts->dev_name, io_opts->dev_name); goto bailout_error; } #if 0 else if ((io_opts->offset != 0) && ((io_opts->offset % dev->sector_size) != 0)) { warnx("Offset %ju for %s is not a multiple of the " "sector size %u", io_opts->offset, io_opts->dev_name, dev->sector_size); goto bailout_error; } else { dev->start_offset_bytes = io_opts->offset; } #endif bailout: return (dev); bailout_error: camdd_free_dev(dev); return (NULL); } /* * Get a get device CCB for the specified device. */ int camdd_get_cgd(struct cam_device *device, struct ccb_getdev *cgd) { union ccb *ccb; int retval = 0; ccb = cam_getccb(device); if (ccb == NULL) { warnx("%s: couldn't allocate CCB", __func__); return -1; } CCB_CLEAR_ALL_EXCEPT_HDR(&ccb->cgd); ccb->ccb_h.func_code = XPT_GDEV_TYPE; if (cam_send_ccb(device, ccb) < 0) { warn("%s: error sending Get Device Information CCB", __func__); cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); retval = -1; goto bailout; } if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) { cam_error_print(device, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); retval = -1; goto bailout; } bcopy(&ccb->cgd, cgd, sizeof(struct ccb_getdev)); bailout: cam_freeccb(ccb); return retval; } int camdd_probe_pass_scsi(struct cam_device *cam_dev, union ccb *ccb, camdd_argmask arglist, int probe_retry_count, int probe_timeout, uint64_t *maxsector, uint32_t *block_len) { struct scsi_read_capacity_data rcap; struct scsi_read_capacity_data_long rcaplong; int retval = -1; if (ccb == NULL) { warnx("%s: error passed ccb is NULL", __func__); goto bailout; } CCB_CLEAR_ALL_EXCEPT_HDR(&ccb->csio); scsi_read_capacity(&ccb->csio, /*retries*/ probe_retry_count, /*cbfcnp*/ NULL, /*tag_action*/ MSG_SIMPLE_Q_TAG, &rcap, SSD_FULL_SIZE, /*timeout*/ probe_timeout ? probe_timeout : 5000); /* Disable freezing the device queue */ ccb->ccb_h.flags |= CAM_DEV_QFRZDIS; if (arglist & CAMDD_ARG_ERR_RECOVER) ccb->ccb_h.flags |= CAM_PASS_ERR_RECOVER; if (cam_send_ccb(cam_dev, ccb) < 0) { warn("error sending READ CAPACITY command"); cam_error_print(cam_dev, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); goto bailout; } if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) { cam_error_print(cam_dev, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); goto bailout; } *maxsector = scsi_4btoul(rcap.addr); *block_len = scsi_4btoul(rcap.length); /* * A last block of 2^32-1 means that the true capacity is over 2TB, * and we need to issue the long READ CAPACITY to get the real * capacity. Otherwise, we're all set. */ if (*maxsector != 0xffffffff) { retval = 0; goto bailout; } scsi_read_capacity_16(&ccb->csio, /*retries*/ probe_retry_count, /*cbfcnp*/ NULL, /*tag_action*/ MSG_SIMPLE_Q_TAG, /*lba*/ 0, /*reladdr*/ 0, /*pmi*/ 0, (uint8_t *)&rcaplong, sizeof(rcaplong), /*sense_len*/ SSD_FULL_SIZE, /*timeout*/ probe_timeout ? probe_timeout : 5000); /* Disable freezing the device queue */ ccb->ccb_h.flags |= CAM_DEV_QFRZDIS; if (arglist & CAMDD_ARG_ERR_RECOVER) ccb->ccb_h.flags |= CAM_PASS_ERR_RECOVER; if (cam_send_ccb(cam_dev, ccb) < 0) { warn("error sending READ CAPACITY (16) command"); cam_error_print(cam_dev, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); goto bailout; } if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) { cam_error_print(cam_dev, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); goto bailout; } *maxsector = scsi_8btou64(rcaplong.addr); *block_len = scsi_4btoul(rcaplong.length); retval = 0; bailout: return retval; } int camdd_probe_pass_nvme(struct cam_device *cam_dev, union ccb *ccb, camdd_argmask arglist, int probe_retry_count, int probe_timeout, uint64_t *maxsector, uint32_t *block_len) { struct nvme_command *nc = NULL; struct nvme_namespace_data nsdata; uint32_t nsid = cam_dev->target_lun & UINT32_MAX; uint8_t format = 0, lbads = 0; int retval = -1; if (ccb == NULL) { warnx("%s: error passed ccb is NULL", __func__); goto bailout; } CCB_CLEAR_ALL_EXCEPT_HDR(&ccb->nvmeio); /* Send Identify Namespace to get block size and capacity */ nc = &ccb->nvmeio.cmd; nc->opc = NVME_OPC_IDENTIFY; nc->nsid = nsid; nc->cdw10 = 0; /* Identify Namespace is CNS = 0 */ cam_fill_nvmeadmin(&ccb->nvmeio, /*retries*/ probe_retry_count, /*cbfcnp*/ NULL, CAM_DIR_IN, (uint8_t *)&nsdata, sizeof(nsdata), probe_timeout); /* Disable freezing the device queue */ ccb->ccb_h.flags |= CAM_DEV_QFRZDIS; if (arglist & CAMDD_ARG_ERR_RECOVER) ccb->ccb_h.flags |= CAM_PASS_ERR_RECOVER; if (cam_send_ccb(cam_dev, ccb) < 0) { warn("error sending Identify Namespace command"); cam_error_print(cam_dev, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); goto bailout; } if ((ccb->ccb_h.status & CAM_STATUS_MASK) != CAM_REQ_CMP) { cam_error_print(cam_dev, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); goto bailout; } *maxsector = nsdata.nsze; /* The LBA Data Size (LBADS) is reported as a power of 2 */ format = nsdata.flbas & NVME_NS_DATA_FLBAS_FORMAT_MASK; lbads = (nsdata.lbaf[format] >> NVME_NS_DATA_LBAF_LBADS_SHIFT) & NVME_NS_DATA_LBAF_LBADS_MASK; *block_len = 1 << lbads; retval = 0; bailout: return retval; } /* * Need to implement this. Do a basic probe: * - Check the inquiry data, make sure we're talking to a device that we * can reasonably expect to talk to -- direct, RBC, CD, WORM. * - Send a test unit ready, make sure the device is available. * - Get the capacity and block size. */ struct camdd_dev * camdd_probe_pass(struct cam_device *cam_dev, struct camdd_io_opts *io_opts, camdd_argmask arglist, int probe_retry_count, int probe_timeout, int io_retry_count, int io_timeout) { union ccb *ccb; uint64_t maxsector = 0; uint32_t cpi_maxio, max_iosize, pass_numblocks; uint32_t block_len = 0; struct camdd_dev *dev = NULL; struct camdd_dev_pass *pass_dev; struct kevent ke; struct ccb_getdev cgd; int retval; int scsi_dev_type = T_NODEVICE; if ((retval = camdd_get_cgd(cam_dev, &cgd)) != 0) { warnx("%s: error retrieving CGD", __func__); return NULL; } ccb = cam_getccb(cam_dev); if (ccb == NULL) { warnx("%s: error allocating ccb", __func__); goto bailout; } switch (cgd.protocol) { case PROTO_SCSI: scsi_dev_type = SID_TYPE(&cam_dev->inq_data); /* * For devices that support READ CAPACITY, we'll attempt to get the * capacity. Otherwise, we really don't support tape or other * devices via SCSI passthrough, so just return an error in that case. */ switch (scsi_dev_type) { case T_DIRECT: case T_WORM: case T_CDROM: case T_OPTICAL: case T_RBC: case T_ZBC_HM: break; default: errx(1, "Unsupported SCSI device type %d", scsi_dev_type); break; /*NOTREACHED*/ } if ((retval = camdd_probe_pass_scsi(cam_dev, ccb, probe_retry_count, arglist, probe_timeout, &maxsector, &block_len))) { goto bailout; } break; case PROTO_NVME: if ((retval = camdd_probe_pass_nvme(cam_dev, ccb, probe_retry_count, arglist, probe_timeout, &maxsector, &block_len))) { goto bailout; } break; default: errx(1, "Unsupported PROTO type %d", cgd.protocol); break; /*NOTREACHED*/ } if (block_len == 0) { warnx("Sector size for %s%u is 0, cannot continue", cam_dev->device_name, cam_dev->dev_unit_num); goto bailout_error; } CCB_CLEAR_ALL_EXCEPT_HDR(&ccb->cpi); ccb->ccb_h.func_code = XPT_PATH_INQ; ccb->ccb_h.flags = CAM_DIR_NONE; ccb->ccb_h.retry_count = 1; if (cam_send_ccb(cam_dev, ccb) < 0) { warn("error sending XPT_PATH_INQ CCB"); cam_error_print(cam_dev, ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); goto bailout; } EV_SET(&ke, cam_dev->fd, EVFILT_READ, EV_ADD|EV_ENABLE, 0, 0, 0); dev = camdd_alloc_dev(CAMDD_DEV_PASS, &ke, 1, io_retry_count, io_timeout); if (dev == NULL) goto bailout; pass_dev = &dev->dev_spec.pass; pass_dev->scsi_dev_type = scsi_dev_type; pass_dev->protocol = cgd.protocol; pass_dev->dev = cam_dev; pass_dev->max_sector = maxsector; pass_dev->block_len = block_len; pass_dev->cpi_maxio = ccb->cpi.maxio; snprintf(dev->device_name, sizeof(dev->device_name), "%s%u", pass_dev->dev->device_name, pass_dev->dev->dev_unit_num); dev->sector_size = block_len; dev->max_sector = maxsector; /* * Determine the optimal blocksize to use for this device. */ /* * If the controller has not specified a maximum I/O size, * just go with 128K as a somewhat conservative value. */ if (pass_dev->cpi_maxio == 0) cpi_maxio = 131072; else cpi_maxio = pass_dev->cpi_maxio; /* * If the controller has a large maximum I/O size, limit it * to something smaller so that the kernel doesn't have trouble * allocating buffers to copy data in and out for us. * XXX KDM this is until we have unmapped I/O support in the kernel. */ max_iosize = min(cpi_maxio, CAMDD_PASS_MAX_BLOCK); /* * If we weren't able to get a block size for some reason, * default to 512 bytes. */ block_len = pass_dev->block_len; if (block_len == 0) block_len = 512; /* * Figure out how many blocksize chunks will fit in the * maximum I/O size. */ pass_numblocks = max_iosize / block_len; /* * And finally, multiple the number of blocks by the LBA * length to get our maximum block size; */ dev->blocksize = pass_numblocks * block_len; if (io_opts->blocksize != 0) { if ((io_opts->blocksize % dev->sector_size) != 0) { warnx("Blocksize %ju for %s is not a multiple of " "sector size %u", (uintmax_t)io_opts->blocksize, dev->device_name, dev->sector_size); goto bailout_error; } dev->blocksize = io_opts->blocksize; } dev->target_queue_depth = CAMDD_PASS_DEFAULT_DEPTH; if (io_opts->queue_depth != 0) dev->target_queue_depth = io_opts->queue_depth; if (io_opts->offset != 0) { if (io_opts->offset > (dev->max_sector * dev->sector_size)) { warnx("Offset %ju is past the end of device %s", io_opts->offset, dev->device_name); goto bailout_error; } #if 0 else if ((io_opts->offset % dev->sector_size) != 0) { warnx("Offset %ju for %s is not a multiple of the " "sector size %u", io_opts->offset, dev->device_name, dev->sector_size); goto bailout_error; } dev->start_offset_bytes = io_opts->offset; #endif } dev->min_cmd_size = io_opts->min_cmd_size; dev->run = camdd_pass_run; dev->fetch = camdd_pass_fetch; bailout: cam_freeccb(ccb); return (dev); bailout_error: cam_freeccb(ccb); camdd_free_dev(dev); return (NULL); } void nvme_read_write(struct ccb_nvmeio *nvmeio, uint32_t retries, void (*cbfcnp)(struct cam_periph *, union ccb *), uint32_t nsid, int readop, uint64_t lba, uint32_t block_count, uint8_t *data_ptr, uint32_t dxfer_len, uint32_t timeout) { struct nvme_command *nc = &nvmeio->cmd; nc->opc = readop ? NVME_OPC_READ : NVME_OPC_WRITE; nc->nsid = nsid; nc->cdw10 = lba & UINT32_MAX; nc->cdw11 = lba >> 32; /* NLB (bits 15:0) is a zero based value */ nc->cdw12 = (block_count - 1) & UINT16_MAX; cam_fill_nvmeio(nvmeio, retries, cbfcnp, readop ? CAM_DIR_IN : CAM_DIR_OUT, data_ptr, dxfer_len, timeout); } void * camdd_worker(void *arg) { struct camdd_dev *dev = arg; struct camdd_buf *buf; struct timespec ts, *kq_ts; ts.tv_sec = 0; ts.tv_nsec = 0; pthread_mutex_lock(&dev->mutex); dev->flags |= CAMDD_DEV_FLAG_ACTIVE; for (;;) { struct kevent ke; int retval = 0; /* * XXX KDM check the reorder queue depth? */ if (dev->write_dev == 0) { uint32_t our_depth, peer_depth, peer_bytes, our_bytes; uint32_t target_depth = dev->target_queue_depth; uint32_t peer_target_depth = dev->peer_dev->target_queue_depth; uint32_t peer_blocksize = dev->peer_dev->blocksize; camdd_get_depth(dev, &our_depth, &peer_depth, &our_bytes, &peer_bytes); #if 0 while (((our_depth < target_depth) && (peer_depth < peer_target_depth)) || ((peer_bytes + our_bytes) < (peer_blocksize * 2))) { #endif while (((our_depth + peer_depth) < (target_depth + peer_target_depth)) || ((peer_bytes + our_bytes) < (peer_blocksize * 3))) { retval = camdd_queue(dev, NULL); if (retval == 1) break; else if (retval != 0) { error_exit = 1; goto bailout; } camdd_get_depth(dev, &our_depth, &peer_depth, &our_bytes, &peer_bytes); } } /* * See if we have any I/O that is ready to execute. */ buf = STAILQ_FIRST(&dev->run_queue); if (buf != NULL) { while (dev->target_queue_depth > dev->cur_active_io) { retval = dev->run(dev); if (retval == -1) { dev->flags |= CAMDD_DEV_FLAG_EOF; error_exit = 1; break; } else if (retval != 0) { break; } } } /* * We've reached EOF, or our partner has reached EOF. */ if ((dev->flags & CAMDD_DEV_FLAG_EOF) || (dev->flags & CAMDD_DEV_FLAG_PEER_EOF)) { if (dev->write_dev != 0) { if ((STAILQ_EMPTY(&dev->work_queue)) && (dev->num_run_queue == 0) && (dev->cur_active_io == 0)) { goto bailout; } } else { /* * If we're the reader, and the writer * got EOF, he is already done. If we got * the EOF, then we need to wait until * everything is flushed out for the writer. */ if (dev->flags & CAMDD_DEV_FLAG_PEER_EOF) { goto bailout; } else if ((dev->num_peer_work_queue == 0) && (dev->num_peer_done_queue == 0) && (dev->cur_active_io == 0) && (dev->num_run_queue == 0)) { goto bailout; } } /* * XXX KDM need to do something about the pending * queue and cleanup resources. */ } if ((dev->write_dev == 0) && (dev->cur_active_io == 0) && (dev->peer_bytes_queued < dev->peer_dev->blocksize)) kq_ts = &ts; else kq_ts = NULL; /* * Run kevent to see if there are events to process. */ pthread_mutex_unlock(&dev->mutex); retval = kevent(dev->kq, NULL, 0, &ke, 1, kq_ts); pthread_mutex_lock(&dev->mutex); if (retval == -1) { warn("%s: error returned from kevent",__func__); goto bailout; } else if (retval != 0) { switch (ke.filter) { case EVFILT_READ: if (dev->fetch != NULL) { retval = dev->fetch(dev); if (retval == -1) { error_exit = 1; goto bailout; } } break; case EVFILT_SIGNAL: /* * We register for this so we don't get * an error as a result of a SIGINFO or a * SIGINT. It will actually get handled * by the signal handler. If we get a * SIGINT, bail out without printing an * error message. Any other signals * will result in the error message above. */ if (ke.ident == SIGINT) goto bailout; break; case EVFILT_USER: retval = 0; /* * Check to see if the other thread has * queued any I/O for us to do. (In this * case we're the writer.) */ for (buf = STAILQ_FIRST(&dev->work_queue); buf != NULL; buf = STAILQ_FIRST(&dev->work_queue)) { STAILQ_REMOVE_HEAD(&dev->work_queue, work_links); retval = camdd_queue(dev, buf); /* * We keep going unless we get an * actual error. If we get EOF, we * still want to remove the buffers * from the queue and send the back * to the reader thread. */ if (retval == -1) { error_exit = 1; goto bailout; } else retval = 0; } /* * Next check to see if the other thread has * queued any completed buffers back to us. * (In this case we're the reader.) */ for (buf = STAILQ_FIRST(&dev->peer_done_queue); buf != NULL; buf = STAILQ_FIRST(&dev->peer_done_queue)){ STAILQ_REMOVE_HEAD( &dev->peer_done_queue, work_links); dev->num_peer_done_queue--; camdd_peer_done(buf); } break; default: warnx("%s: unknown kevent filter %d", __func__, ke.filter); break; } } } bailout: dev->flags &= ~CAMDD_DEV_FLAG_ACTIVE; /* XXX KDM cleanup resources here? */ pthread_mutex_unlock(&dev->mutex); need_exit = 1; sem_post(&camdd_sem); return (NULL); } /* * Simplistic translation of CCB status to our local status. */ camdd_buf_status camdd_ccb_status(union ccb *ccb, int protocol) { camdd_buf_status status = CAMDD_STATUS_NONE; cam_status ccb_status; ccb_status = ccb->ccb_h.status & CAM_STATUS_MASK; switch (protocol) { case PROTO_SCSI: switch (ccb_status) { case CAM_REQ_CMP: { if (ccb->csio.resid == 0) { status = CAMDD_STATUS_OK; } else if (ccb->csio.dxfer_len > ccb->csio.resid) { status = CAMDD_STATUS_SHORT_IO; } else { status = CAMDD_STATUS_EOF; } break; } case CAM_SCSI_STATUS_ERROR: { switch (ccb->csio.scsi_status) { case SCSI_STATUS_OK: case SCSI_STATUS_COND_MET: case SCSI_STATUS_INTERMED: case SCSI_STATUS_INTERMED_COND_MET: status = CAMDD_STATUS_OK; break; case SCSI_STATUS_CMD_TERMINATED: case SCSI_STATUS_CHECK_COND: case SCSI_STATUS_QUEUE_FULL: case SCSI_STATUS_BUSY: case SCSI_STATUS_RESERV_CONFLICT: default: status = CAMDD_STATUS_ERROR; break; } break; } default: status = CAMDD_STATUS_ERROR; break; } break; case PROTO_NVME: switch (ccb_status) { case CAM_REQ_CMP: status = CAMDD_STATUS_OK; break; default: status = CAMDD_STATUS_ERROR; break; } break; default: status = CAMDD_STATUS_ERROR; break; } return (status); } /* * Queue a buffer to our peer's work thread for writing. * * Returns 0 for success, -1 for failure, 1 if the other thread exited. */ int camdd_queue_peer_buf(struct camdd_dev *dev, struct camdd_buf *buf) { struct kevent ke; STAILQ_HEAD(, camdd_buf) local_queue; struct camdd_buf *buf1, *buf2; struct camdd_buf_data *data = NULL; uint64_t peer_bytes_queued = 0; int active = 1; int retval = 0; STAILQ_INIT(&local_queue); /* * Since we're the reader, we need to queue our I/O to the writer * in sequential order in order to make sure it gets written out * in sequential order. * * Check the next expected I/O starting offset. If this doesn't * match, put it on the reorder queue. */ if ((buf->lba * dev->sector_size) != dev->next_completion_pos_bytes) { /* * If there is nothing on the queue, there is no sorting * needed. */ if (STAILQ_EMPTY(&dev->reorder_queue)) { STAILQ_INSERT_TAIL(&dev->reorder_queue, buf, links); dev->num_reorder_queue++; goto bailout; } /* * Sort in ascending order by starting LBA. There should * be no identical LBAs. */ for (buf1 = STAILQ_FIRST(&dev->reorder_queue); buf1 != NULL; buf1 = buf2) { buf2 = STAILQ_NEXT(buf1, links); if (buf->lba < buf1->lba) { /* * If we're less than the first one, then * we insert at the head of the list * because this has to be the first element * on the list. */ STAILQ_INSERT_HEAD(&dev->reorder_queue, buf, links); dev->num_reorder_queue++; break; } else if (buf->lba > buf1->lba) { if (buf2 == NULL) { STAILQ_INSERT_TAIL(&dev->reorder_queue, buf, links); dev->num_reorder_queue++; break; } else if (buf->lba < buf2->lba) { STAILQ_INSERT_AFTER(&dev->reorder_queue, buf1, buf, links); dev->num_reorder_queue++; break; } } else { errx(1, "Found buffers with duplicate LBA %ju!", buf->lba); } } goto bailout; } else { /* * We're the next expected I/O completion, so put ourselves * on the local queue to be sent to the writer. We use * work_links here so that we can queue this to the * peer_work_queue before taking the buffer off of the * local_queue. */ dev->next_completion_pos_bytes += buf->len; STAILQ_INSERT_TAIL(&local_queue, buf, work_links); /* * Go through the reorder queue looking for more sequential * I/O and add it to the local queue. */ for (buf1 = STAILQ_FIRST(&dev->reorder_queue); buf1 != NULL; buf1 = STAILQ_FIRST(&dev->reorder_queue)) { /* * As soon as we see an I/O that is out of sequence, * we're done. */ if ((buf1->lba * dev->sector_size) != dev->next_completion_pos_bytes) break; STAILQ_REMOVE_HEAD(&dev->reorder_queue, links); dev->num_reorder_queue--; STAILQ_INSERT_TAIL(&local_queue, buf1, work_links); dev->next_completion_pos_bytes += buf1->len; } } /* * Setup the event to let the other thread know that it has work * pending. */ EV_SET(&ke, (uintptr_t)&dev->peer_dev->work_queue, EVFILT_USER, 0, NOTE_TRIGGER, 0, NULL); /* * Put this on our shadow queue so that we know what we've queued * to the other thread. */ STAILQ_FOREACH_SAFE(buf1, &local_queue, work_links, buf2) { if (buf1->buf_type != CAMDD_BUF_DATA) { errx(1, "%s: should have a data buffer, not an " "indirect buffer", __func__); } data = &buf1->buf_type_spec.data; /* * We only need to send one EOF to the writer, and don't * need to continue sending EOFs after that. */ if (buf1->status == CAMDD_STATUS_EOF) { if (dev->flags & CAMDD_DEV_FLAG_EOF_SENT) { STAILQ_REMOVE(&local_queue, buf1, camdd_buf, work_links); camdd_release_buf(buf1); retval = 1; continue; } dev->flags |= CAMDD_DEV_FLAG_EOF_SENT; } STAILQ_INSERT_TAIL(&dev->peer_work_queue, buf1, links); peer_bytes_queued += (data->fill_len - data->resid); dev->peer_bytes_queued += (data->fill_len - data->resid); dev->num_peer_work_queue++; } if (STAILQ_FIRST(&local_queue) == NULL) goto bailout; /* * Drop our mutex and pick up the other thread's mutex. We need to * do this to avoid deadlocks. */ pthread_mutex_unlock(&dev->mutex); pthread_mutex_lock(&dev->peer_dev->mutex); if (dev->peer_dev->flags & CAMDD_DEV_FLAG_ACTIVE) { /* * Put the buffers on the other thread's incoming work queue. */ for (buf1 = STAILQ_FIRST(&local_queue); buf1 != NULL; buf1 = STAILQ_FIRST(&local_queue)) { STAILQ_REMOVE_HEAD(&local_queue, work_links); STAILQ_INSERT_TAIL(&dev->peer_dev->work_queue, buf1, work_links); } /* * Send an event to the other thread's kqueue to let it know * that there is something on the work queue. */ retval = kevent(dev->peer_dev->kq, &ke, 1, NULL, 0, NULL); if (retval == -1) warn("%s: unable to add peer work_queue kevent", __func__); else retval = 0; } else active = 0; pthread_mutex_unlock(&dev->peer_dev->mutex); pthread_mutex_lock(&dev->mutex); /* * If the other side isn't active, run through the queue and * release all of the buffers. */ if (active == 0) { for (buf1 = STAILQ_FIRST(&local_queue); buf1 != NULL; buf1 = STAILQ_FIRST(&local_queue)) { STAILQ_REMOVE_HEAD(&local_queue, work_links); STAILQ_REMOVE(&dev->peer_work_queue, buf1, camdd_buf, links); dev->num_peer_work_queue--; camdd_release_buf(buf1); } dev->peer_bytes_queued -= peer_bytes_queued; retval = 1; } bailout: return (retval); } /* * Return a buffer to the reader thread when we have completed writing it. */ int camdd_complete_peer_buf(struct camdd_dev *dev, struct camdd_buf *peer_buf) { struct kevent ke; int retval = 0; /* * Setup the event to let the other thread know that we have * completed a buffer. */ EV_SET(&ke, (uintptr_t)&dev->peer_dev->peer_done_queue, EVFILT_USER, 0, NOTE_TRIGGER, 0, NULL); /* * Drop our lock and acquire the other thread's lock before * manipulating */ pthread_mutex_unlock(&dev->mutex); pthread_mutex_lock(&dev->peer_dev->mutex); /* * Put the buffer on the reader thread's peer done queue now that * we have completed it. */ STAILQ_INSERT_TAIL(&dev->peer_dev->peer_done_queue, peer_buf, work_links); dev->peer_dev->num_peer_done_queue++; /* * Send an event to the peer thread to let it know that we've added * something to its peer done queue. */ retval = kevent(dev->peer_dev->kq, &ke, 1, NULL, 0, NULL); if (retval == -1) warn("%s: unable to add peer_done_queue kevent", __func__); else retval = 0; /* * Drop the other thread's lock and reacquire ours. */ pthread_mutex_unlock(&dev->peer_dev->mutex); pthread_mutex_lock(&dev->mutex); return (retval); } /* * Free a buffer that was written out by the writer thread and returned to * the reader thread. */ void camdd_peer_done(struct camdd_buf *buf) { struct camdd_dev *dev; struct camdd_buf_data *data; dev = buf->dev; if (buf->buf_type != CAMDD_BUF_DATA) { errx(1, "%s: should have a data buffer, not an " "indirect buffer", __func__); } data = &buf->buf_type_spec.data; STAILQ_REMOVE(&dev->peer_work_queue, buf, camdd_buf, links); dev->num_peer_work_queue--; dev->peer_bytes_queued -= (data->fill_len - data->resid); if (buf->status == CAMDD_STATUS_EOF) dev->flags |= CAMDD_DEV_FLAG_PEER_EOF; STAILQ_INSERT_TAIL(&dev->free_queue, buf, links); } /* * Assumes caller holds the lock for this device. */ void camdd_complete_buf(struct camdd_dev *dev, struct camdd_buf *buf, int *error_count) { int retval = 0; /* * If we're the reader, we need to send the completed I/O * to the writer. If we're the writer, we need to just * free up resources, or let the reader know if we've * encountered an error. */ if (dev->write_dev == 0) { retval = camdd_queue_peer_buf(dev, buf); if (retval != 0) (*error_count)++; } else { struct camdd_buf *tmp_buf, *next_buf; STAILQ_FOREACH_SAFE(tmp_buf, &buf->src_list, src_links, next_buf) { struct camdd_buf *src_buf; struct camdd_buf_indirect *indirect; STAILQ_REMOVE(&buf->src_list, tmp_buf, camdd_buf, src_links); tmp_buf->status = buf->status; if (tmp_buf->buf_type == CAMDD_BUF_DATA) { camdd_complete_peer_buf(dev, tmp_buf); continue; } indirect = &tmp_buf->buf_type_spec.indirect; src_buf = indirect->src_buf; src_buf->refcount--; /* * XXX KDM we probably need to account for * exactly how many bytes we were able to * write. Allocate the residual to the * first N buffers? Or just track the * number of bytes written? Right now the reader * doesn't do anything with a residual. */ src_buf->status = buf->status; if (src_buf->refcount <= 0) camdd_complete_peer_buf(dev, src_buf); STAILQ_INSERT_TAIL(&dev->free_indirect_queue, tmp_buf, links); } STAILQ_INSERT_TAIL(&dev->free_queue, buf, links); } } /* * Fetch all completed commands from the pass(4) device. * * Returns the number of commands received, or -1 if any of the commands * completed with an error. Returns 0 if no commands are available. */ int camdd_pass_fetch(struct camdd_dev *dev) { struct camdd_dev_pass *pass_dev = &dev->dev_spec.pass; union ccb ccb; int retval = 0, num_fetched = 0, error_count = 0; pthread_mutex_unlock(&dev->mutex); /* * XXX KDM we don't distinguish between EFAULT and ENOENT. */ while ((retval = ioctl(pass_dev->dev->fd, CAMIOGET, &ccb)) != -1) { struct camdd_buf *buf; struct camdd_buf_data *data; cam_status ccb_status; union ccb *buf_ccb; buf = ccb.ccb_h.ccb_buf; data = &buf->buf_type_spec.data; buf_ccb = &data->ccb; num_fetched++; /* * Copy the CCB back out so we get status, sense data, etc. */ bcopy(&ccb, buf_ccb, sizeof(ccb)); pthread_mutex_lock(&dev->mutex); /* * We're now done, so take this off the active queue. */ STAILQ_REMOVE(&dev->active_queue, buf, camdd_buf, links); dev->cur_active_io--; ccb_status = ccb.ccb_h.status & CAM_STATUS_MASK; if (ccb_status != CAM_REQ_CMP) { cam_error_print(pass_dev->dev, &ccb, CAM_ESF_ALL, CAM_EPF_ALL, stderr); } switch (pass_dev->protocol) { case PROTO_SCSI: data->resid = ccb.csio.resid; dev->bytes_transferred += (ccb.csio.dxfer_len - ccb.csio.resid); break; case PROTO_NVME: data->resid = 0; dev->bytes_transferred += ccb.nvmeio.dxfer_len; break; default: return -1; break; } if (buf->status == CAMDD_STATUS_NONE) buf->status = camdd_ccb_status(&ccb, pass_dev->protocol); if (buf->status == CAMDD_STATUS_ERROR) error_count++; else if (buf->status == CAMDD_STATUS_EOF) { /* * Once we queue this buffer to our partner thread, * he will know that we've hit EOF. */ dev->flags |= CAMDD_DEV_FLAG_EOF; } camdd_complete_buf(dev, buf, &error_count); /* * Unlock in preparation for the ioctl call. */ pthread_mutex_unlock(&dev->mutex); } pthread_mutex_lock(&dev->mutex); if (error_count > 0) return (-1); else return (num_fetched); } /* * Returns -1 for error, 0 for success/continue, and 1 for resource * shortage/stop processing. */ int camdd_file_run(struct camdd_dev *dev) { struct camdd_dev_file *file_dev = &dev->dev_spec.file; struct camdd_buf_data *data; struct camdd_buf *buf; off_t io_offset; int retval = 0, write_dev = dev->write_dev; int error_count = 0, no_resources = 0, double_buf_needed = 0; uint32_t num_sectors = 0, db_len = 0; buf = STAILQ_FIRST(&dev->run_queue); if (buf == NULL) { no_resources = 1; goto bailout; } else if ((dev->write_dev == 0) && (dev->flags & (CAMDD_DEV_FLAG_EOF | CAMDD_DEV_FLAG_EOF_SENT))) { STAILQ_REMOVE(&dev->run_queue, buf, camdd_buf, links); dev->num_run_queue--; buf->status = CAMDD_STATUS_EOF; error_count++; goto bailout; } /* * If we're writing, we need to go through the source buffer list * and create an S/G list. */ if (write_dev != 0) { retval = camdd_buf_sg_create(buf, /*iovec*/ 1, dev->sector_size, &num_sectors, &double_buf_needed); if (retval != 0) { no_resources = 1; goto bailout; } } STAILQ_REMOVE(&dev->run_queue, buf, camdd_buf, links); dev->num_run_queue--; data = &buf->buf_type_spec.data; /* * pread(2) and pwrite(2) offsets are byte offsets. */ io_offset = buf->lba * dev->sector_size; /* * Unlock the mutex while we read or write. */ pthread_mutex_unlock(&dev->mutex); /* * Note that we don't need to double buffer if we're the reader * because in that case, we have allocated a single buffer of * sufficient size to do the read. This copy is necessary on * writes because if one of the components of the S/G list is not * a sector size multiple, the kernel will reject the write. This * is unfortunate but not surprising. So this will make sure that * we're using a single buffer that is a multiple of the sector size. */ if ((double_buf_needed != 0) && (data->sg_count > 1) && (write_dev != 0)) { uint32_t cur_offset; int i; if (file_dev->tmp_buf == NULL) file_dev->tmp_buf = calloc(dev->blocksize, 1); if (file_dev->tmp_buf == NULL) { buf->status = CAMDD_STATUS_ERROR; error_count++; pthread_mutex_lock(&dev->mutex); goto bailout; } for (i = 0, cur_offset = 0; i < data->sg_count; i++) { bcopy(data->iovec[i].iov_base, &file_dev->tmp_buf[cur_offset], data->iovec[i].iov_len); cur_offset += data->iovec[i].iov_len; } db_len = cur_offset; } if (file_dev->file_flags & CAMDD_FF_CAN_SEEK) { if (write_dev == 0) { /* * XXX KDM is there any way we would need a S/G * list here? */ retval = pread(file_dev->fd, data->buf, buf->len, io_offset); } else { if (double_buf_needed != 0) { retval = pwrite(file_dev->fd, file_dev->tmp_buf, db_len, io_offset); } else if (data->sg_count == 0) { retval = pwrite(file_dev->fd, data->buf, data->fill_len, io_offset); } else { retval = pwritev(file_dev->fd, data->iovec, data->sg_count, io_offset); } } } else { if (write_dev == 0) { /* * XXX KDM is there any way we would need a S/G * list here? */ retval = read(file_dev->fd, data->buf, buf->len); } else { if (double_buf_needed != 0) { retval = write(file_dev->fd, file_dev->tmp_buf, db_len); } else if (data->sg_count == 0) { retval = write(file_dev->fd, data->buf, data->fill_len); } else { retval = writev(file_dev->fd, data->iovec, data->sg_count); } } } /* We're done, re-acquire the lock */ pthread_mutex_lock(&dev->mutex); if (retval >= (ssize_t)data->fill_len) { /* * If the bytes transferred is more than the request size, * that indicates an overrun, which should only happen at * the end of a transfer if we have to round up to a sector * boundary. */ if (buf->status == CAMDD_STATUS_NONE) buf->status = CAMDD_STATUS_OK; data->resid = 0; dev->bytes_transferred += retval; } else if (retval == -1) { warn("Error %s %s", (write_dev) ? "writing to" : "reading from", file_dev->filename); buf->status = CAMDD_STATUS_ERROR; data->resid = data->fill_len; error_count++; if (dev->debug == 0) goto bailout; if ((double_buf_needed != 0) && (write_dev != 0)) { fprintf(stderr, "%s: fd %d, DB buf %p, len %u lba %ju " "offset %ju\n", __func__, file_dev->fd, file_dev->tmp_buf, db_len, (uintmax_t)buf->lba, (uintmax_t)io_offset); } else if (data->sg_count == 0) { fprintf(stderr, "%s: fd %d, buf %p, len %u, lba %ju " "offset %ju\n", __func__, file_dev->fd, data->buf, data->fill_len, (uintmax_t)buf->lba, (uintmax_t)io_offset); } else { int i; fprintf(stderr, "%s: fd %d, len %u, lba %ju " "offset %ju\n", __func__, file_dev->fd, data->fill_len, (uintmax_t)buf->lba, (uintmax_t)io_offset); for (i = 0; i < data->sg_count; i++) { fprintf(stderr, "index %d ptr %p len %zu\n", i, data->iovec[i].iov_base, data->iovec[i].iov_len); } } } else if (retval == 0) { buf->status = CAMDD_STATUS_EOF; if (dev->debug != 0) printf("%s: got EOF from %s!\n", __func__, file_dev->filename); data->resid = data->fill_len; error_count++; } else if (retval < (ssize_t)data->fill_len) { if (buf->status == CAMDD_STATUS_NONE) buf->status = CAMDD_STATUS_SHORT_IO; data->resid = data->fill_len - retval; dev->bytes_transferred += retval; } bailout: if (buf != NULL) { if (buf->status == CAMDD_STATUS_EOF) { struct camdd_buf *buf2; dev->flags |= CAMDD_DEV_FLAG_EOF; STAILQ_FOREACH(buf2, &dev->run_queue, links) buf2->status = CAMDD_STATUS_EOF; } camdd_complete_buf(dev, buf, &error_count); } if (error_count != 0) return (-1); else if (no_resources != 0) return (1); else return (0); } /* * Execute one command from the run queue. Returns 0 for success, 1 for * stop processing, and -1 for error. */ int camdd_pass_run(struct camdd_dev *dev) { struct camdd_buf *buf = NULL; struct camdd_dev_pass *pass_dev = &dev->dev_spec.pass; struct camdd_buf_data *data; uint32_t num_blocks, sectors_used = 0; union ccb *ccb; int retval = 0, is_write = dev->write_dev; int double_buf_needed = 0; buf = STAILQ_FIRST(&dev->run_queue); if (buf == NULL) { retval = 1; goto bailout; } /* * If we're writing, we need to go through the source buffer list * and create an S/G list. */ if (is_write != 0) { retval = camdd_buf_sg_create(buf, /*iovec*/ 0,dev->sector_size, &sectors_used, &double_buf_needed); if (retval != 0) { retval = -1; goto bailout; } } STAILQ_REMOVE(&dev->run_queue, buf, camdd_buf, links); dev->num_run_queue--; data = &buf->buf_type_spec.data; /* * In almost every case the number of blocks should be the device * block size. The exception may be at the end of an I/O stream * for a partial block or at the end of a device. */ if (is_write != 0) num_blocks = sectors_used; else num_blocks = data->fill_len / pass_dev->block_len; ccb = &data->ccb; switch (pass_dev->protocol) { case PROTO_SCSI: CCB_CLEAR_ALL_EXCEPT_HDR(&ccb->csio); scsi_read_write(&ccb->csio, /*retries*/ dev->retry_count, /*cbfcnp*/ NULL, /*tag_action*/ MSG_SIMPLE_Q_TAG, /*readop*/ (dev->write_dev == 0) ? SCSI_RW_READ : SCSI_RW_WRITE, /*byte2*/ 0, /*minimum_cmd_size*/ dev->min_cmd_size, /*lba*/ buf->lba, /*block_count*/ num_blocks, /*data_ptr*/ (data->sg_count != 0) ? (uint8_t *)data->segs : data->buf, /*dxfer_len*/ (num_blocks * pass_dev->block_len), /*sense_len*/ SSD_FULL_SIZE, /*timeout*/ dev->io_timeout); if (data->sg_count != 0) { ccb->csio.sglist_cnt = data->sg_count; } break; case PROTO_NVME: CCB_CLEAR_ALL_EXCEPT_HDR(&ccb->nvmeio); nvme_read_write(&ccb->nvmeio, /*retries*/ dev->retry_count, /*cbfcnp*/ NULL, /*nsid*/ pass_dev->dev->target_lun & UINT32_MAX, /*readop*/ dev->write_dev == 0, /*lba*/ buf->lba, /*block_count*/ num_blocks, /*data_ptr*/ (data->sg_count != 0) ? (uint8_t *)data->segs : data->buf, /*dxfer_len*/ (num_blocks * pass_dev->block_len), /*timeout*/ dev->io_timeout); ccb->nvmeio.sglist_cnt = data->sg_count; break; default: retval = -1; goto bailout; } /* Disable freezing the device queue */ ccb->ccb_h.flags |= CAM_DEV_QFRZDIS; if (dev->retry_count != 0) ccb->ccb_h.flags |= CAM_PASS_ERR_RECOVER; if (data->sg_count != 0) { ccb->ccb_h.flags |= CAM_DATA_SG; } /* * Store a pointer to the buffer in the CCB. The kernel will * restore this when we get it back, and we'll use it to identify * the buffer this CCB came from. */ ccb->ccb_h.ccb_buf = buf; /* * Unlock our mutex in preparation for issuing the ioctl. */ pthread_mutex_unlock(&dev->mutex); /* * Queue the CCB to the pass(4) driver. */ if (ioctl(pass_dev->dev->fd, CAMIOQUEUE, ccb) == -1) { pthread_mutex_lock(&dev->mutex); warn("%s: error sending CAMIOQUEUE ioctl to %s%u", __func__, pass_dev->dev->device_name, pass_dev->dev->dev_unit_num); warn("%s: CCB address is %p", __func__, ccb); retval = -1; STAILQ_INSERT_TAIL(&dev->free_queue, buf, links); } else { pthread_mutex_lock(&dev->mutex); dev->cur_active_io++; STAILQ_INSERT_TAIL(&dev->active_queue, buf, links); } bailout: return (retval); } int camdd_get_next_lba_len(struct camdd_dev *dev, uint64_t *lba, ssize_t *len) { uint32_t num_blocks; int retval = 0; *lba = dev->next_io_pos_bytes / dev->sector_size; *len = dev->blocksize; num_blocks = *len / dev->sector_size; /* * If max_sector is 0, then we have no set limit. This can happen * if we're writing to a file in a filesystem, or reading from * something like /dev/zero. */ if ((dev->max_sector != 0) || (dev->sector_io_limit != 0)) { uint64_t max_sector; if ((dev->max_sector != 0) && (dev->sector_io_limit != 0)) max_sector = min(dev->sector_io_limit, dev->max_sector); else if (dev->max_sector != 0) max_sector = dev->max_sector; else max_sector = dev->sector_io_limit; /* * Check to see whether we're starting off past the end of * the device. If so, we need to just send an EOF * notification to the writer. */ if (*lba > max_sector) { *len = 0; retval = 1; } else if (((*lba + num_blocks) > max_sector + 1) || ((*lba + num_blocks) < *lba)) { /* * If we get here (but pass the first check), we * can trim the request length down to go to the * end of the device. */ num_blocks = (max_sector + 1) - *lba; *len = num_blocks * dev->sector_size; retval = 1; } } dev->next_io_pos_bytes += *len; return (retval); } /* * Returns 0 for success, 1 for EOF detected, and -1 for failure. */ int camdd_queue(struct camdd_dev *dev, struct camdd_buf *read_buf) { struct camdd_buf *buf = NULL; struct camdd_buf_data *data; size_t new_len; struct camdd_buf_data *rb_data; int is_write = dev->write_dev; int eof_flush_needed = 0; int retval = 0; /* * If we've gotten EOF or our partner has, we should not continue * queueing I/O. If we're a writer, though, we should continue * to write any buffers that don't have EOF status. */ if ((dev->flags & CAMDD_DEV_FLAG_EOF) || ((dev->flags & CAMDD_DEV_FLAG_PEER_EOF) && (is_write == 0))) { /* * Tell the worker thread that we have seen EOF. */ retval = 1; /* * If we're the writer, send the buffer back with EOF status. */ if (is_write) { read_buf->status = CAMDD_STATUS_EOF; camdd_complete_peer_buf(dev, read_buf); } goto bailout; } if (is_write == 0) { buf = camdd_get_buf(dev, CAMDD_BUF_DATA); if (buf == NULL) { retval = -1; goto bailout; } data = &buf->buf_type_spec.data; retval = camdd_get_next_lba_len(dev, &buf->lba, &buf->len); if (retval != 0) { buf->status = CAMDD_STATUS_EOF; if ((buf->len == 0) && ((dev->flags & (CAMDD_DEV_FLAG_EOF_SENT | CAMDD_DEV_FLAG_EOF_QUEUED)) != 0)) { camdd_release_buf(buf); goto bailout; } dev->flags |= CAMDD_DEV_FLAG_EOF_QUEUED; } data->fill_len = buf->len; data->src_start_offset = buf->lba * dev->sector_size; /* * Put this on the run queue. */ STAILQ_INSERT_TAIL(&dev->run_queue, buf, links); dev->num_run_queue++; /* We're done. */ goto bailout; } /* * Check for new EOF status from the reader. */ if ((read_buf->status == CAMDD_STATUS_EOF) || (read_buf->status == CAMDD_STATUS_ERROR)) { dev->flags |= CAMDD_DEV_FLAG_PEER_EOF; if ((STAILQ_FIRST(&dev->pending_queue) == NULL) && (read_buf->len == 0)) { camdd_complete_peer_buf(dev, read_buf); retval = 1; goto bailout; } else eof_flush_needed = 1; } /* * See if we have a buffer we're composing with pieces from our * partner thread. */ buf = STAILQ_FIRST(&dev->pending_queue); if (buf == NULL) { uint64_t lba; ssize_t len; retval = camdd_get_next_lba_len(dev, &lba, &len); if (retval != 0) { read_buf->status = CAMDD_STATUS_EOF; if (len == 0) { dev->flags |= CAMDD_DEV_FLAG_EOF; camdd_complete_peer_buf(dev, read_buf); goto bailout; } } /* * If we don't have a pending buffer, we need to grab a new * one from the free list or allocate another one. */ buf = camdd_get_buf(dev, CAMDD_BUF_DATA); if (buf == NULL) { retval = 1; goto bailout; } buf->lba = lba; buf->len = len; STAILQ_INSERT_TAIL(&dev->pending_queue, buf, links); dev->num_pending_queue++; } data = &buf->buf_type_spec.data; rb_data = &read_buf->buf_type_spec.data; if ((rb_data->src_start_offset != dev->next_peer_pos_bytes) && (dev->debug != 0)) { printf("%s: WARNING: reader offset %#jx != expected offset " "%#jx\n", __func__, (uintmax_t)rb_data->src_start_offset, (uintmax_t)dev->next_peer_pos_bytes); } dev->next_peer_pos_bytes = rb_data->src_start_offset + (rb_data->fill_len - rb_data->resid); new_len = (rb_data->fill_len - rb_data->resid) + data->fill_len; if (new_len < buf->len) { /* * There are three cases here: * 1. We need more data to fill up a block, so we put * this I/O on the queue and wait for more I/O. * 2. We have a pending buffer in the queue that is * smaller than our blocksize, but we got an EOF. So we * need to go ahead and flush the write out. * 3. We got an error. */ /* * Increment our fill length. */ data->fill_len += (rb_data->fill_len - rb_data->resid); /* * Add the new read buffer to the list for writing. */ STAILQ_INSERT_TAIL(&buf->src_list, read_buf, src_links); /* Increment the count */ buf->src_count++; if (eof_flush_needed == 0) { /* * We need to exit, because we don't have enough * data yet. */ goto bailout; } else { /* * Take the buffer off of the pending queue. */ STAILQ_REMOVE(&dev->pending_queue, buf, camdd_buf, links); dev->num_pending_queue--; /* * If we need an EOF flush, but there is no data * to flush, go ahead and return this buffer. */ if (data->fill_len == 0) { camdd_complete_buf(dev, buf, /*error_count*/0); retval = 1; goto bailout; } /* * Put this on the next queue for execution. */ STAILQ_INSERT_TAIL(&dev->run_queue, buf, links); dev->num_run_queue++; } } else if (new_len == buf->len) { /* * We have enough data to completey fill one block, * so we're ready to issue the I/O. */ /* * Take the buffer off of the pending queue. */ STAILQ_REMOVE(&dev->pending_queue, buf, camdd_buf, links); dev->num_pending_queue--; /* * Add the new read buffer to the list for writing. */ STAILQ_INSERT_TAIL(&buf->src_list, read_buf, src_links); /* Increment the count */ buf->src_count++; /* * Increment our fill length. */ data->fill_len += (rb_data->fill_len - rb_data->resid); /* * Put this on the next queue for execution. */ STAILQ_INSERT_TAIL(&dev->run_queue, buf, links); dev->num_run_queue++; } else { struct camdd_buf *idb; struct camdd_buf_indirect *indirect; uint32_t len_to_go, cur_offset; idb = camdd_get_buf(dev, CAMDD_BUF_INDIRECT); if (idb == NULL) { retval = 1; goto bailout; } indirect = &idb->buf_type_spec.indirect; indirect->src_buf = read_buf; read_buf->refcount++; indirect->offset = 0; indirect->start_ptr = rb_data->buf; /* * We've already established that there is more * data in read_buf than we have room for in our * current write request. So this particular chunk * of the request should just be the remainder * needed to fill up a block. */ indirect->len = buf->len - (data->fill_len - data->resid); camdd_buf_add_child(buf, idb); /* * This buffer is ready to execute, so we can take * it off the pending queue and put it on the run * queue. */ STAILQ_REMOVE(&dev->pending_queue, buf, camdd_buf, links); dev->num_pending_queue--; STAILQ_INSERT_TAIL(&dev->run_queue, buf, links); dev->num_run_queue++; cur_offset = indirect->offset + indirect->len; /* * The resulting I/O would be too large to fit in * one block. We need to split this I/O into * multiple pieces. Allocate as many buffers as needed. */ for (len_to_go = rb_data->fill_len - rb_data->resid - indirect->len; len_to_go > 0;) { struct camdd_buf *new_buf; struct camdd_buf_data *new_data; uint64_t lba; ssize_t len; retval = camdd_get_next_lba_len(dev, &lba, &len); if ((retval != 0) && (len == 0)) { /* * The device has already been marked * as EOF, and there is no space left. */ goto bailout; } new_buf = camdd_get_buf(dev, CAMDD_BUF_DATA); if (new_buf == NULL) { retval = 1; goto bailout; } new_buf->lba = lba; new_buf->len = len; idb = camdd_get_buf(dev, CAMDD_BUF_INDIRECT); if (idb == NULL) { retval = 1; goto bailout; } indirect = &idb->buf_type_spec.indirect; indirect->src_buf = read_buf; read_buf->refcount++; indirect->offset = cur_offset; indirect->start_ptr = rb_data->buf + cur_offset; indirect->len = min(len_to_go, new_buf->len); #if 0 if (((indirect->len % dev->sector_size) != 0) || ((indirect->offset % dev->sector_size) != 0)) { warnx("offset %ju len %ju not aligned with " "sector size %u", indirect->offset, (uintmax_t)indirect->len, dev->sector_size); } #endif cur_offset += indirect->len; len_to_go -= indirect->len; camdd_buf_add_child(new_buf, idb); new_data = &new_buf->buf_type_spec.data; if ((new_data->fill_len == new_buf->len) || (eof_flush_needed != 0)) { STAILQ_INSERT_TAIL(&dev->run_queue, new_buf, links); dev->num_run_queue++; } else if (new_data->fill_len < buf->len) { STAILQ_INSERT_TAIL(&dev->pending_queue, new_buf, links); dev->num_pending_queue++; } else { warnx("%s: too much data in new " "buffer!", __func__); retval = 1; goto bailout; } } } bailout: return (retval); } void camdd_get_depth(struct camdd_dev *dev, uint32_t *our_depth, uint32_t *peer_depth, uint32_t *our_bytes, uint32_t *peer_bytes) { *our_depth = dev->cur_active_io + dev->num_run_queue; if (dev->num_peer_work_queue > dev->num_peer_done_queue) *peer_depth = dev->num_peer_work_queue - dev->num_peer_done_queue; else *peer_depth = 0; *our_bytes = *our_depth * dev->blocksize; *peer_bytes = dev->peer_bytes_queued; } void camdd_sig_handler(int sig) { if (sig == SIGINFO) need_status = 1; else { need_exit = 1; error_exit = 1; } sem_post(&camdd_sem); } void camdd_print_status(struct camdd_dev *camdd_dev, struct camdd_dev *other_dev, struct timespec *start_time) { struct timespec done_time; uint64_t total_ns; long double mb_sec, total_sec; int error = 0; error = clock_gettime(CLOCK_MONOTONIC_PRECISE, &done_time); if (error != 0) { warn("Unable to get done time"); return; } timespecsub(&done_time, start_time, &done_time); total_ns = done_time.tv_nsec + (done_time.tv_sec * 1000000000); total_sec = total_ns; total_sec /= 1000000000; fprintf(stderr, "%ju bytes %s %s\n%ju bytes %s %s\n" "%.4Lf seconds elapsed\n", (uintmax_t)camdd_dev->bytes_transferred, (camdd_dev->write_dev == 0) ? "read from" : "written to", camdd_dev->device_name, (uintmax_t)other_dev->bytes_transferred, (other_dev->write_dev == 0) ? "read from" : "written to", other_dev->device_name, total_sec); mb_sec = min(other_dev->bytes_transferred,camdd_dev->bytes_transferred); mb_sec /= 1024 * 1024; mb_sec *= 1000000000; mb_sec /= total_ns; fprintf(stderr, "%.2Lf MB/sec\n", mb_sec); } int camdd_rw(struct camdd_io_opts *io_opts, camdd_argmask arglist, int num_io_opts, uint64_t max_io, int retry_count, int timeout) { struct cam_device *new_cam_dev = NULL; struct camdd_dev *devs[2]; struct timespec start_time; pthread_t threads[2]; int unit = 0; int error = 0; int i; bzero(devs, sizeof(devs)); if (num_io_opts != 2) { warnx("Must have one input and one output path"); error = 1; goto bailout; } for (i = 0; i < num_io_opts; i++) { switch (io_opts[i].dev_type) { case CAMDD_DEV_PASS: { if (isdigit(io_opts[i].dev_name[0])) { int bus = 0, target = 0, lun = 0; int rv; /* device specified as bus:target[:lun] */ rv = parse_btl(io_opts[i].dev_name, &bus, &target, &lun); if (rv < 2) { warnx("numeric device specification " "must be either bus:target, or " "bus:target:lun"); error = 1; goto bailout; } /* default to 0 if lun was not specified */ if (rv == 2) { lun = 0; } new_cam_dev = cam_open_btl(bus, target, lun, O_RDWR, NULL); } else { char name[30]; if (cam_get_device(io_opts[i].dev_name, name, sizeof name, &unit) == -1) { warnx("%s", cam_errbuf); error = 1; goto bailout; } new_cam_dev = cam_open_spec_device(name, unit, O_RDWR, NULL); } if (new_cam_dev == NULL) { warnx("%s", cam_errbuf); error = 1; goto bailout; } devs[i] = camdd_probe_pass(new_cam_dev, /*io_opts*/ &io_opts[i], arglist, /*probe_retry_count*/ 3, /*probe_timeout*/ 5000, /*io_retry_count*/ retry_count, /*io_timeout*/ timeout); if (devs[i] == NULL) { warn("Unable to probe device %s%u", new_cam_dev->device_name, new_cam_dev->dev_unit_num); error = 1; goto bailout; } break; } case CAMDD_DEV_FILE: { int fd = -1; if (io_opts[i].dev_name[0] == '-') { if (io_opts[i].write_dev != 0) fd = STDOUT_FILENO; else fd = STDIN_FILENO; } else { if (io_opts[i].write_dev != 0) { fd = open(io_opts[i].dev_name, O_RDWR | O_CREAT, S_IWUSR |S_IRUSR); } else { fd = open(io_opts[i].dev_name, O_RDONLY); } } if (fd == -1) { warn("error opening file %s", io_opts[i].dev_name); error = 1; goto bailout; } devs[i] = camdd_probe_file(fd, &io_opts[i], retry_count, timeout); if (devs[i] == NULL) { error = 1; goto bailout; } break; } default: warnx("Unknown device type %d (%s)", io_opts[i].dev_type, io_opts[i].dev_name); error = 1; goto bailout; break; /*NOTREACHED */ } devs[i]->write_dev = io_opts[i].write_dev; devs[i]->start_offset_bytes = io_opts[i].offset; if (max_io != 0) { devs[i]->sector_io_limit = (devs[i]->start_offset_bytes / devs[i]->sector_size) + (max_io / devs[i]->sector_size) - 1; } devs[i]->next_io_pos_bytes = devs[i]->start_offset_bytes; devs[i]->next_completion_pos_bytes =devs[i]->start_offset_bytes; } devs[0]->peer_dev = devs[1]; devs[1]->peer_dev = devs[0]; devs[0]->next_peer_pos_bytes = devs[0]->peer_dev->next_io_pos_bytes; devs[1]->next_peer_pos_bytes = devs[1]->peer_dev->next_io_pos_bytes; sem_init(&camdd_sem, /*pshared*/ 0, 0); signal(SIGINFO, camdd_sig_handler); signal(SIGINT, camdd_sig_handler); error = clock_gettime(CLOCK_MONOTONIC_PRECISE, &start_time); if (error != 0) { warn("Unable to get start time"); goto bailout; } for (i = 0; i < num_io_opts; i++) { error = pthread_create(&threads[i], NULL, camdd_worker, (void *)devs[i]); if (error != 0) { warnc(error, "pthread_create() failed"); goto bailout; } } for (;;) { if ((sem_wait(&camdd_sem) == -1) || (need_exit != 0)) { struct kevent ke; for (i = 0; i < num_io_opts; i++) { EV_SET(&ke, (uintptr_t)&devs[i]->work_queue, EVFILT_USER, 0, NOTE_TRIGGER, 0, NULL); devs[i]->flags |= CAMDD_DEV_FLAG_EOF; error = kevent(devs[i]->kq, &ke, 1, NULL, 0, NULL); if (error == -1) warn("%s: unable to wake up thread", __func__); error = 0; } break; } else if (need_status != 0) { camdd_print_status(devs[0], devs[1], &start_time); need_status = 0; } } for (i = 0; i < num_io_opts; i++) { pthread_join(threads[i], NULL); } camdd_print_status(devs[0], devs[1], &start_time); bailout: for (i = 0; i < num_io_opts; i++) camdd_free_dev(devs[i]); return (error + error_exit); } void usage(void) { fprintf(stderr, "usage: camdd <-i|-o pass=pass0,bs=1M,offset=1M,depth=4>\n" " <-i|-o file=/tmp/file,bs=512K,offset=1M>\n" " <-i|-o file=/dev/da0,bs=512K,offset=1M>\n" " <-i|-o file=/dev/nsa0,bs=512K>\n" " [-C retry_count][-E][-m max_io_amt][-t timeout_secs][-v][-h]\n" "Option description\n" "-i <arg=val> Specify input device/file and parameters\n" "-o <arg=val> Specify output device/file and parameters\n" "Input and Output parameters\n" "pass=name Specify a pass(4) device like pass0 or /dev/pass0\n" "file=name Specify a file or device, /tmp/foo, /dev/da0, /dev/null\n" " or - for stdin/stdout\n" "bs=blocksize Specify blocksize in bytes, or using K, M, G, etc. suffix\n" "offset=len Specify starting offset in bytes or using K, M, G suffix\n" " NOTE: offset cannot be specified on tapes, pipes, stdin/out\n" "depth=N Specify a numeric queue depth. This only applies to pass(4)\n" "mcs=N Specify a minimum cmd size for pass(4) read/write commands\n" "Optional arguments\n" "-C retry_cnt Specify a retry count for pass(4) devices\n" "-E Enable CAM error recovery for pass(4) devices\n" "-m max_io Specify the maximum amount to be transferred in bytes or\n" " using K, G, M, etc. suffixes\n" "-t timeout Specify the I/O timeout to use with pass(4) devices\n" "-v Enable verbose error recovery\n" "-h Print this message\n"); } int camdd_parse_io_opts(char *args, int is_write, struct camdd_io_opts *io_opts) { char *tmpstr, *tmpstr2; char *orig_tmpstr = NULL; int retval = 0; io_opts->write_dev = is_write; tmpstr = strdup(args); if (tmpstr == NULL) { warn("strdup failed"); retval = 1; goto bailout; } orig_tmpstr = tmpstr; while ((tmpstr2 = strsep(&tmpstr, ",")) != NULL) { char *name, *value; /* * If the user creates an empty parameter by putting in two * commas, skip over it and look for the next field. */ if (*tmpstr2 == '\0') continue; name = strsep(&tmpstr2, "="); if (*name == '\0') { warnx("Got empty I/O parameter name"); retval = 1; goto bailout; } value = strsep(&tmpstr2, "="); if ((value == NULL) || (*value == '\0')) { warnx("Empty I/O parameter value for %s", name); retval = 1; goto bailout; } if (strncasecmp(name, "file", 4) == 0) { io_opts->dev_type = CAMDD_DEV_FILE; io_opts->dev_name = strdup(value); if (io_opts->dev_name == NULL) { warn("Error allocating memory"); retval = 1; goto bailout; } } else if (strncasecmp(name, "pass", 4) == 0) { io_opts->dev_type = CAMDD_DEV_PASS; io_opts->dev_name = strdup(value); if (io_opts->dev_name == NULL) { warn("Error allocating memory"); retval = 1; goto bailout; } } else if ((strncasecmp(name, "bs", 2) == 0) || (strncasecmp(name, "blocksize", 9) == 0)) { retval = expand_number(value, &io_opts->blocksize); if (retval == -1) { warn("expand_number(3) failed on %s=%s", name, value); retval = 1; goto bailout; } } else if (strncasecmp(name, "depth", 5) == 0) { char *endptr; io_opts->queue_depth = strtoull(value, &endptr, 0); if (*endptr != '\0') { warnx("invalid queue depth %s", value); retval = 1; goto bailout; } } else if (strncasecmp(name, "mcs", 3) == 0) { char *endptr; io_opts->min_cmd_size = strtol(value, &endptr, 0); if ((*endptr != '\0') || ((io_opts->min_cmd_size > 16) || (io_opts->min_cmd_size < 0))) { warnx("invalid minimum cmd size %s", value); retval = 1; goto bailout; } } else if (strncasecmp(name, "offset", 6) == 0) { retval = expand_number(value, &io_opts->offset); if (retval == -1) { warn("expand_number(3) failed on %s=%s", name, value); retval = 1; goto bailout; } } else if (strncasecmp(name, "debug", 5) == 0) { char *endptr; io_opts->debug = strtoull(value, &endptr, 0); if (*endptr != '\0') { warnx("invalid debug level %s", value); retval = 1; goto bailout; } } else { warnx("Unrecognized parameter %s=%s", name, value); } } bailout: free(orig_tmpstr); return (retval); } int main(int argc, char **argv) { int c; camdd_argmask arglist = CAMDD_ARG_NONE; int timeout = 0, retry_count = 1; int error = 0; uint64_t max_io = 0; struct camdd_io_opts *opt_list = NULL; if (argc == 1) { usage(); exit(1); } opt_list = calloc(2, sizeof(struct camdd_io_opts)); if (opt_list == NULL) { warn("Unable to allocate option list"); error = 1; goto bailout; } while ((c = getopt(argc, argv, "C:Ehi:m:o:t:v")) != -1){ switch (c) { case 'C': retry_count = strtol(optarg, NULL, 0); if (retry_count < 0) errx(1, "retry count %d is < 0", retry_count); break; case 'E': arglist |= CAMDD_ARG_ERR_RECOVER; break; case 'i': case 'o': if (((c == 'i') && (opt_list[0].dev_type != CAMDD_DEV_NONE)) || ((c == 'o') && (opt_list[1].dev_type != CAMDD_DEV_NONE))) { errx(1, "Only one input and output path " "allowed"); } error = camdd_parse_io_opts(optarg, (c == 'o') ? 1 : 0, (c == 'o') ? &opt_list[1] : &opt_list[0]); if (error != 0) goto bailout; break; case 'm': error = expand_number(optarg, &max_io); if (error == -1) { warn("invalid maximum I/O amount %s", optarg); error = 1; goto bailout; } break; case 't': timeout = strtol(optarg, NULL, 0); if (timeout < 0) errx(1, "invalid timeout %d", timeout); /* Convert the timeout from seconds to ms */ timeout *= 1000; break; case 'v': arglist |= CAMDD_ARG_VERBOSE; break; case 'h': default: usage(); exit(1); break; /*NOTREACHED*/ } } if ((opt_list[0].dev_type == CAMDD_DEV_NONE) || (opt_list[1].dev_type == CAMDD_DEV_NONE)) errx(1, "Must specify both -i and -o"); /* * Set the timeout if the user hasn't specified one. */ if (timeout == 0) timeout = CAMDD_PASS_RW_TIMEOUT; error = camdd_rw(opt_list, arglist, 2, max_io, retry_count, timeout); bailout: free(opt_list); exit(error); }