• Start
• Documentation
  • PostgreSQL
  • mnoGoSearch
  • Apache 2.4
  • FreeBSD handbook
  • FreeBSD Manual
  • FreeBSD Source
• Tools
• Search
• Protected Area

plain

FreeBSD manual

keyword 1 2 3 4 5 6 7 8 9 n l

download PDF document: gst-launch-1.0.1.pdf

GStreamer(1) FreeBSD General Commands Manual GStreamer(1)
NAME gst-launch-1.0 - build and run a GStreamer pipeline
SYNOPSIS gst-launch-1.0 [OPTION...] PIPELINE-DESCRIPTION
DESCRIPTION gst-launch-1.0 is a tool that builds and runs basic GStreamer pipelines.
In simple form, a PIPELINE-DESCRIPTION is a list of elements separated by exclamation marks (!). Properties may be appended to elements, in the form property=value. A "preset" can also be set using the @preset=<preset name> syntax.
For a complete description of possible PIPELINE-DESCRIPTIONS see the section pipeline description below or consult the GStreamer documentation.
Please note that gst-launch-1.0 is primarily a debugging tool for developers and users. You should not build applications on top of it. For applications, use the gst_parse_launch() function of the GStreamer API as an easy way to construct pipelines from pipeline descriptions.
OPTIONS gst-launch-1.0 accepts the following options:
--help Print help synopsis and available FLAGS
-v, --verbose Output status information and property notifications
-q, --quiet Do not print any progress information
-m, --messages Output messages posted on the pipeline's bus
-t, --tags Output tags (also known as metadata)
-e, --eos-on-shutdown Force an EOS event on sources before shutting the pipeline down. This is useful to make sure muxers create readable files when a muxing pipeline is shut down forcefully via Control-C.
-i, --index Gather and print index statistics. This is mostly useful for playback or recording pipelines.
-f, --no-fault Do not install a fault handler
-T, --trace Print memory allocation traces. The feature must be enabled at compile time to work.
Allow printing current position of pipeline even if stdout is not a TTY. This option has no effect if the "no-position" option is specified.
GSTREAMER OPTIONS gst-launch-1.0 also accepts the following options that are common to all GStreamer applications:
--gst-version Prints the version string of the GStreamer core library.
--gst-fatal-warnings Causes GStreamer to abort if a warning message occurs. This is equivalent to setting the environment variable G_DEBUG to 'fatal_warnings' (see the section environment variables below for further information).
--gst-debug=STRING A comma separated list of category_name:level pairs to specify debugging levels for each category. Level is in the range 0-9 where 0 will show no messages, and 9 will show all messages. The wildcard * can be used to match category names. Note that the order of categories and levels is important, wildcards at the end may override levels set earlier. The log levels are: 1=ERROR, 2=WARNING, 3=FIXME, 4=INFO, 5=DEBUG, 6=LOG, 7=TRACE, 9=MEMDUMP. Since GStreamer 1.2 one can also use the debug level names, e.g. --gst-debug=*sink:LOG. A full description of the various debug levels can be found in the GStreamer core library API documentation, in the "Running GStreamer Applications" section.
Use --gst-debug-help to show category names
Example: GST_CAT:5,GST_ELEMENT_*:3,oggdemux:5

--gst-debug-level=LEVEL Sets the threshold for printing debugging messages. A higher level will print more messages. The useful range is 0-9, with the default being 0. Level 6 (LOG level) will show all information that is usually required for debugging purposes. Higher levels are only useful in very specific cases. See above for the full list of levels.
--gst-debug-no-color GStreamer normally prints debugging messages so that the messages are color-coded when printed to a terminal that handles ANSI escape sequences. Using this option causes GStreamer to print messages without color. Setting the GST_DEBUG_NO_COLOR environment variable will achieve the same thing.
--gst-debug-color-mode GStreamer normally prints debugging messages so that the messages are color-coded when printed to a terminal that handles ANSI escape sequences (on *nix), or uses W32 console API to color the messages printed into a console (on W32). Using this option causes GStreamer to print messages without color ('off' or 'disable'), print messages with default colors
--gst-debug-help Prints a list of available debug categories and their default debugging level.
--gst-plugin-spew GStreamer info flags to set Enable printout of errors while loading GStreamer plugins
--gst-plugin-path=PATH Add directories separated with ':' to the plugin search path
--gst-plugin-load=PLUGINS Preload plugins specified in a comma-separated list. Another way to specify plugins to preload is to use the environment variable GST_PLUGIN_PATH

PIPELINE DESCRIPTION A pipeline consists elements and links. Elements can be put into bins of different sorts. Elements, links and bins can be specified in a pipeline description in any order.
Elements
ELEMENTTYPE [PROPERTY1 ...]
Creates an element of type ELEMENTTYPE and sets the PROPERTIES.
Properties
PROPERTY=VALUE ...
Sets the property to the specified value. You can use gst-inspect-1.0(1) to find out about properties and allowed values of different elements. Enumeration properties can be set by name, nick or value.
Presets
@preset=<preset name> ...
Sets the preset on the element. you can use gst-inspect-1.0(1) to find out what presets are available for a specific element.
Bins
[BINTYPE.] ( [PROPERTY1 ...] PIPELINE-DESCRIPTION )
Specifies that a bin of type BINTYPE is created and the given properties are set. Every element between the braces is put into the bin. Please note the dot that has to be used after the BINTYPE. You will almost never need this functionality, it is only really useful for applications using the gst_launch_parse() API with 'bin' as bintype. That way it is possible to build partial pipelines instead of a full- fledged top-level pipeline.
Links
[[SRCELEMENT].[PAD1,...]] ! [[SINKELEMENT].[PAD1,...]] element that was specified directly in front of or after the link is used. This works across bins. If a padname is given, the link is done with these pads. If no pad names are given all possibilities are tried and a matching pad is used. If multiple padnames are given, both sides must have the same number of pads specified and multiple links are done in the given order. So the simplest link is a simple exclamation mark, that links the element to the left of it to the element right of it. Linking using the : operator attempts to link all possible pads between the elements
Caps
MEDIATYPE [, PROPERTY[, PROPERTY ...]]] [; CAPS[; CAPS ...]]
Creates a capability with the given media type and optionally with given properties. The media type can be escaped using " or '. If you want to chain caps, you can add more caps in the same format afterwards.
Properties
NAME=[(TYPE)]VALUE in lists and ranges: [(TYPE)]VALUE
Sets the requested property in capabilities. The name is an alphanumeric value and the type can have the following case-insensitive values: - i or int for integer values or ranges - f or float for float values or ranges - b, bool or boolean for boolean values - s, str or string for strings - fraction for fractions (framerate, pixel-aspect-ratio) - l or list for lists If no type was given, the following order is tried: integer, float, boolean, string. Integer values must be parsable by strtol(), floats by strtod(). FOURCC values may either be integers or strings. Boolean values are (case insensitive) yes, no, true or false and may like strings be escaped with " or '. Ranges are in this format: [ VALUE, VALUE ] Lists use this format: { VALUE [, VALUE ...] }

PIPELINE EXAMPLES The examples below assume that you have the correct plug-ins available. In general, "pulsesink" can be substituted with another audio output plug-in such as "alsasink" or "osxaudiosink" Likewise, "xvimagesink" can be substituted with "ximagesink", "glimagesink", or "osxvideosink". Keep in mind though that different sinks might accept different formats and even the same sink might accept different formats on different machines, so you might need to add converter elements like audioconvert and audioresample (for audio) or videoconvert (for video) in front of the sink to make things work.
Audio playback
Play the mp3 music file "music.mp3" using a libmpg123-based plug-in and output to an Pulseaudio device Play an mp3 file or an http stream using GIO gst-launch-1.0 giosrc location=music.mp3 ! mpegaudioparse ! mpg123audiodec ! audioconvert ! pulsesink gst-launch-1.0 giosrc location=http://domain.com/music.mp3 ! mpegaudioparse ! mpg123audiodec ! audioconvert ! audioresample ! pulsesink
Use GIO to play an mp3 file located on an SMB server gst-launch-1.0 giosrc location=smb://computer/music.mp3 ! mpegaudioparse ! mpg123audiodec ! audioconvert ! audioresample ! pulsesink
Format conversion
Convert an mp3 music file to an Ogg Vorbis file gst-launch-1.0 filesrc location=music.mp3 ! mpegaudioparse ! mpg123audiodec ! audioconvert ! vorbisenc ! oggmux ! filesink location=music.ogg
Convert to the FLAC format gst-launch-1.0 filesrc location=music.mp3 ! mpegaudioparse ! mpg123audiodec ! audioconvert ! flacenc ! filesink location=test.flac
Other
Plays a .WAV file that contains raw audio data (PCM). gst-launch-1.0 filesrc location=music.wav ! wavparse ! audioconvert ! audioresample ! pulsesink
Convert a .WAV file containing raw audio data into an Ogg Vorbis or mp3 file gst-launch-1.0 filesrc location=music.wav ! wavparse ! audioconvert ! vorbisenc ! oggmux ! filesink location=music.ogg gst-launch-1.0 filesrc location=music.wav ! wavparse ! audioconvert ! lamemp3enc ! filesink location=music.mp3
Rips all tracks from compact disc and convert them into a single mp3 file gst-launch-1.0 cdparanoiasrc mode=continuous ! audioconvert ! lamemp3enc ! mpegaudioparse ! id3v2mux ! filesink location=cd.mp3
Rips track 5 from the CD and converts it into a single mp3 file gst-launch-1.0 cdparanoiasrc track=5 ! audioconvert ! lamemp3enc ! mpegaudioparse ! id3v2mux ! filesink location=track5.mp3
Using gst-inspect-1.0(1), it is possible to discover settings like the above for cdparanoiasrc that will tell it to rip the entire cd or only tracks of it. Alternatively, you can use an URI and gst-launch-1.0 will find an element (such as cdparanoia) that supports that protocol for you, e.g.: gst-launch-1.0 cdda://5 ! lamemp3enc vbr=new vbr-quality=6 ! filesink location=track5.mp3
Records sound from your audio input and encodes it into an ogg file gst-launch-1.0 pulsesrc ! audioconvert ! vorbisenc ! oggmux ! filesink location=input.ogg
Video
gst-launch-1.0 filesrc location=/flflfj.vob ! dvddemux ! mpegvideoparse ! mpeg2dec ! sdlvideosink
Play both video and audio portions of an MPEG movie gst-launch-1.0 filesrc location=movie.mpg ! dvddemux name=demuxer demuxer. ! queue ! mpegvideoparse ! mpeg2dec ! sdlvideosink demuxer. ! queue ! mpegaudioparse ! mpg123audiodec ! audioconvert ! audioresample ! pulsesink
Play an AVI movie with an external text subtitle stream gst-launch-1.0 filesrc location=movie.mpg ! mpegdemux name=demuxer demuxer. ! queue ! mpegvideoparse ! mpeg2dec ! videoconvert ! sdlvideosink demuxer. ! queue ! mpegaudioparse ! mpg123audiodec ! audioconvert ! audioresample ! pulsesink
This example also shows how to refer to specific pads by name if an element (here: textoverlay) has multiple sink or source pads. gst-launch-1.0 textoverlay name=overlay ! videoconvert ! videoscale ! autovideosink filesrc location=movie.avi ! decodebin ! videoconvert ! overlay.video_sink filesrc location=movie.srt ! subparse ! overlay.text_sink
Play an AVI movie with an external text subtitle stream using playbin gst-launch-1.0 playbin uri=file:///path/to/movie.avi suburi=file:///path/to/movie.srt
Network streaming
Stream video using RTP and network elements.
This command would be run on the transmitter gst-launch-1.0 v4l2src ! video/x-raw,width=128,height=96,format=UYVY ! videoconvert ! ffenc_h263 ! video/x-h263 ! rtph263ppay pt=96 ! udpsink host=192.168.1.1 port=5000
Use this command on the receiver gst-launch-1.0 udpsrc port=5000 ! application/x-rtp, clock-rate=90000,payload=96 ! rtph263pdepay queue-delay=0 ! ffdec_h263 ! xvimagesink
Diagnostic
Generate a null stream and ignore it (and print out details). gst-launch-1.0 -v fakesrc num-buffers=16 ! fakesink
Generate a pure sine tone to test the audio output gst-launch-1.0 audiotestsrc ! audioconvert ! audioresample ! pulsesink
Generate a familiar test pattern to test the video output gst-launch-1.0 videotestsrc ! xvimagesink gst-launch-1.0 videotestsrc ! ximagesink
Automatic linking
You can use the decodebin element to automatically select the right elements to get a working pipeline.
Play any supported audio format name=decoder decoder. ! queue ! audioconvert ! audioresample ! pulsesink decoder. ! videoconvert ! xvimagesink gst-launch-1.0 playbin uri=file:///home/joe/foo.avi

Filtered connections
These examples show you how to use filtered caps.
Show a test image and use the YUY2 or YV12 video format for this. gst-launch-1.0 videotestsrc ! 'video/x-raw,format=YUY2;video/x-raw,format=YV12' ! xvimagesink
Record audio and write it to a .wav file. Force usage of signed 16 to 32 bit samples and a sample rate between 32kHz and 64KHz. gst-launch-1.0 pulsesrc ! 'audio/x-raw,rate=[32000,64000],format={S16LE,S24LE,S32LE}' ! wavenc ! filesink location=recording.wav


ENVIRONMENT VARIABLES GST_DEBUG Comma-separated list of debug categories and levels (e.g. GST_DEBUG=totem:4,typefind:5). '*' is allowed as a wildcard as part of debug category names (e.g. GST_DEBUG=*sink:6,*audio*:6). Since 1.2.0 it is also possible to specify the log level by name (1=ERROR, 2=WARN, 3=FIXME, 4=INFO, 5=DEBUG, 6=LOG, 7=TRACE, 9=MEMDUMP) (e.g. GST_DEBUG=*audio*:LOG)
GST_DEBUG_NO_COLOR When this environment variable is set, coloured debug output is disabled.
GST_DEBUG_DUMP_DOT_DIR When set to a filesystem path, store 'dot' files of pipeline graphs there. These can then later be converted into an image using the 'dot' utility from the graphviz set of tools, like this: dot foo.dot -Tsvg -o foo.svg (png or jpg are also possible as output format). There is also a utility called 'xdot' which allows you to view the .dot file directly without converting it first. When the pipeline changes state through NULL to PLAYING and back to NULL, a dot file is generated on each state change. To write a snapshot of the pipeline state, send a SIGHUP to the process.
GST_REGISTRY Path of the plugin registry file. Default is ~/.cache/gstreamer-1.0/registry-CPU.bin where CPU is the machine/cpu type GStreamer was compiled for, e.g. 'i486', 'i686', 'x86-64', 'ppc', etc. (check the output of "uname -i" and "uname -m" for details).
GST_REGISTRY_UPDATE Set to "no" to force GStreamer to assume that no plugins have changed, been added or been removed. This will make GStreamer skip the initial check whether a rebuild of the registry cache is required or not. This may be useful in embedded environments where the installed plugins never change. Do not use this option Specifies a list of plugins that are always loaded by default. If not set, this defaults to the system-installed path, and the plugins installed in the user's home directory
GST_DEBUG_FILE Set this variable to a file path to redirect all GStreamer debug messages to this file. If left unset, debug messages with be output unto the standard error.
ORC_CODE Useful Orc environment variable. Set ORC_CODE=debug to enable debuggers such as gdb to create useful backtraces from Orc- generated code. Set ORC_CODE=backup or ORC_CODE=emulate if you suspect Orc's SIMD code generator is producing incorrect code. (Quite a few important GStreamer plugins like videotestsrc, audioconvert or audioresample use Orc).
G_DEBUG Useful GLib environment variable. Set G_DEBUG=fatal_warnings to make GStreamer programs abort when a critical warning such as an assertion failure occurs. This is useful if you want to find out which part of the code caused that warning to be triggered and under what circumstances. Simply set G_DEBUG as mentioned above and run the program in gdb (or let it core dump). Then get a stack trace in the usual way.
FILES ~/.cache/gstreamer-1.0/registry-*.bin The plugin cache; can be deleted at any time, will be re- created automatically when it does not exist yet or plugins change. Based on XDG_CACHE_DIR, so may be in a different location than the one suggested.
SEE ALSO gst-inspect-1.0(1), gst-launch-1.0(1),
AUTHOR The GStreamer team at http://gstreamer.freedesktop.org/
May 2007 GStreamer(1)