FreeBSD manual
download PDF document: DB_File.3.pdf
DB_File(3) Perl Programmers Reference Guide DB_File(3)
NAME
DB_File - Perl5 access to Berkeley DB version 1.x
SYNOPSIS
use DB_File;
[$X =] tie %hash, 'DB_File', [$filename, $flags, $mode, $DB_HASH] ;
[$X =] tie %hash, 'DB_File', $filename, $flags, $mode, $DB_BTREE ;
[$X =] tie @array, 'DB_File', $filename, $flags, $mode, $DB_RECNO ;
$status = $X->del($key [, $flags]) ;
$status = $X->put($key, $value [, $flags]) ;
$status = $X->get($key, $value [, $flags]) ;
$status = $X->seq($key, $value, $flags) ;
$status = $X->sync([$flags]) ;
$status = $X->fd ;
# BTREE only
$count = $X->get_dup($key) ;
@list = $X->get_dup($key) ;
%list = $X->get_dup($key, 1) ;
$status = $X->find_dup($key, $value) ;
$status = $X->del_dup($key, $value) ;
# RECNO only
$a = $X->length;
$a = $X->pop ;
$X->push(list);
$a = $X->shift;
$X->unshift(list);
@r = $X->splice(offset, length, elements);
# DBM Filters
$old_filter = $db->filter_store_key ( sub { ... } ) ;
$old_filter = $db->filter_store_value( sub { ... } ) ;
$old_filter = $db->filter_fetch_key ( sub { ... } ) ;
$old_filter = $db->filter_fetch_value( sub { ... } ) ;
untie %hash ;
untie @array ;
DESCRIPTION
DB_File is a module which allows Perl programs to make use of the
facilities provided by Berkeley DB version 1.x (if you have a newer
version of DB, see "Using DB_File with Berkeley DB version 2 or
greater"). It is assumed that you have a copy of the Berkeley DB
manual pages at hand when reading this documentation. The interface
defined here mirrors the Berkeley DB interface closely.
Berkeley DB is a C library which provides a consistent interface to a
number of database formats. DB_File provides an interface to all three
of the database types currently supported by Berkeley DB.
The file types are:
DB_HASH
applications, is built into Berkeley DB. If you do need to use
your own hashing algorithm it is possible to write your own in
Perl and have DB_File use it instead.
DB_BTREE
The btree format allows arbitrary key/value pairs to be stored in
a sorted, balanced binary tree.
As with the DB_HASH format, it is possible to provide a user
defined Perl routine to perform the comparison of keys. By
default, though, the keys are stored in lexical order.
DB_RECNO
DB_RECNO allows both fixed-length and variable-length flat text
files to be manipulated using the same key/value pair interface as
in DB_HASH and DB_BTREE. In this case the key will consist of a
record (line) number.
Using DB_File with Berkeley DB version 2 or greater
Although DB_File is intended to be used with Berkeley DB version 1, it
can also be used with version 2, 3 or 4. In this case the interface is
limited to the functionality provided by Berkeley DB 1.x. Anywhere the
version 2 or greater interface differs, DB_File arranges for it to work
like version 1. This feature allows DB_File scripts that were built
with version 1 to be migrated to version 2 or greater without any
changes.
If you want to make use of the new features available in Berkeley DB
2.x or greater, use the Perl module BerkeleyDB
<https://metacpan.org/pod/BerkeleyDB> instead.
Note: The database file format has changed multiple times in Berkeley
DB version 2, 3 and 4. If you cannot recreate your databases, you must
dump any existing databases with either the "db_dump" or the
"db_dump185" utility that comes with Berkeley DB. Once you have rebuilt
DB_File to use Berkeley DB version 2 or greater, your databases can be
recreated using "db_load". Refer to the Berkeley DB documentation for
further details.
Please read "COPYRIGHT" before using version 2.x or greater of Berkeley
DB with DB_File.
Interface to Berkeley DB
DB_File allows access to Berkeley DB files using the tie() mechanism in
Perl 5 (for full details, see "tie()" in perlfunc). This facility
allows DB_File to access Berkeley DB files using either an associative
array (for DB_HASH & DB_BTREE file types) or an ordinary array (for the
DB_RECNO file type).
In addition to the tie() interface, it is also possible to access most
of the functions provided in the Berkeley DB API directly. See "THE
API INTERFACE".
Opening a Berkeley DB Database File
Berkeley DB uses the function dbopen() to open or create a database.
Here is the C prototype for dbopen():
DB*
dbopen (const char * file, int flags, int mode,
This interface is handled slightly differently in DB_File. Here is an
equivalent call using DB_File:
tie %array, 'DB_File', $filename, $flags, $mode, $DB_HASH ;
The "filename", "flags" and "mode" parameters are the direct equivalent
of their dbopen() counterparts. The final parameter $DB_HASH performs
the function of both the "type" and "openinfo" parameters in dbopen().
In the example above $DB_HASH is actually a pre-defined reference to a
hash object. DB_File has three of these pre-defined references. Apart
from $DB_HASH, there is also $DB_BTREE and $DB_RECNO.
The keys allowed in each of these pre-defined references is limited to
the names used in the equivalent C structure. So, for example, the
$DB_HASH reference will only allow keys called "bsize", "cachesize",
"ffactor", "hash", "lorder" and "nelem".
To change one of these elements, just assign to it like this:
$DB_HASH->{'cachesize'} = 10000 ;
The three predefined variables $DB_HASH, $DB_BTREE and $DB_RECNO are
usually adequate for most applications. If you do need to create extra
instances of these objects, constructors are available for each file
type.
Here are examples of the constructors and the valid options available
for DB_HASH, DB_BTREE and DB_RECNO respectively.
$a = DB_File::HASHINFO->new();
$a->{'bsize'} ;
$a->{'cachesize'} ;
$a->{'ffactor'};
$a->{'hash'} ;
$a->{'lorder'} ;
$a->{'nelem'} ;
$b = DB_File::BTREEINFO->new();
$b->{'flags'} ;
$b->{'cachesize'} ;
$b->{'maxkeypage'} ;
$b->{'minkeypage'} ;
$b->{'psize'} ;
$b->{'compare'} ;
$b->{'prefix'} ;
$b->{'lorder'} ;
$c = DB_File::RECNOINFO->new();
$c->{'bval'} ;
$c->{'cachesize'} ;
$c->{'psize'} ;
$c->{'flags'} ;
$c->{'lorder'} ;
$c->{'reclen'} ;
$c->{'bfname'} ;
The values stored in the hashes above are mostly the direct equivalent
A few of the options need extra discussion here. When used, the C
equivalent of the keys "hash", "compare" and "prefix" store pointers to
C functions. In DB_File these keys are used to store references to Perl
subs. Below are templates for each of the subs:
sub hash
{
my ($data) = @_ ;
...
# return the hash value for $data
return $hash ;
}
sub compare
{
my ($key, $key2) = @_ ;
...
# return 0 if $key1 eq $key2
# -1 if $key1 lt $key2
# 1 if $key1 gt $key2
return (-1 , 0 or 1) ;
}
sub prefix
{
my ($key, $key2) = @_ ;
...
# return number of bytes of $key2 which are
# necessary to determine that it is greater than $key1
return $bytes ;
}
See "Changing the BTREE sort order" for an example of using the
"compare" template.
If you are using the DB_RECNO interface and you intend making use of
"bval", you should check out "The 'bval' Option".
Default Parameters
It is possible to omit some or all of the final 4 parameters in the
call to "tie" and let them take default values. As DB_HASH is the most
common file format used, the call:
tie %A, "DB_File", "filename" ;
is equivalent to:
tie %A, "DB_File", "filename", O_CREAT|O_RDWR, 0666, $DB_HASH ;
It is also possible to omit the filename parameter as well, so the
call:
tie %A, "DB_File" ;
is equivalent to:
tie %A, "DB_File", undef, O_CREAT|O_RDWR, 0666, $DB_HASH ;
DB_HASH
The DB_HASH file format is probably the most commonly used of the three
file formats that DB_File supports. It is also very straightforward to
use.
A Simple Example
This example shows how to create a database, add key/value pairs to the
database, delete keys/value pairs and finally how to enumerate the
contents of the database.
use warnings ;
use strict ;
use DB_File ;
our (%h, $k, $v) ;
unlink "fruit" ;
tie %h, "DB_File", "fruit", O_RDWR|O_CREAT, 0666, $DB_HASH
or die "Cannot open file 'fruit': $!\n";
# Add a few key/value pairs to the file
$h{"apple"} = "red" ;
$h{"orange"} = "orange" ;
$h{"banana"} = "yellow" ;
$h{"tomato"} = "red" ;
# Check for existence of a key
print "Banana Exists\n\n" if $h{"banana"} ;
# Delete a key/value pair.
delete $h{"apple"} ;
# print the contents of the file
while (($k, $v) = each %h)
{ print "$k -> $v\n" }
untie %h ;
here is the output:
Banana Exists
orange -> orange
tomato -> red
banana -> yellow
Note that the like ordinary associative arrays, the order of the keys
retrieved is in an apparently random order.
DB_BTREE
The DB_BTREE format is useful when you want to store data in a given
order. By default the keys will be stored in lexical order, but as you
will see from the example shown in the next section, it is very easy to
define your own sorting function.
Changing the BTREE sort order
This script shows how to override the default sorting algorithm that
BTREE uses. Instead of using the normal lexical ordering, a case
insensitive compare function will be used.
sub Compare
{
my ($key1, $key2) = @_ ;
"\L$key1" cmp "\L$key2" ;
}
# specify the Perl sub that will do the comparison
$DB_BTREE->{'compare'} = \&Compare ;
unlink "tree" ;
tie %h, "DB_File", "tree", O_RDWR|O_CREAT, 0666, $DB_BTREE
or die "Cannot open file 'tree': $!\n" ;
# Add a key/value pair to the file
$h{'Wall'} = 'Larry' ;
$h{'Smith'} = 'John' ;
$h{'mouse'} = 'mickey' ;
$h{'duck'} = 'donald' ;
# Delete
delete $h{"duck"} ;
# Cycle through the keys printing them in order.
# Note it is not necessary to sort the keys as
# the btree will have kept them in order automatically.
foreach (keys %h)
{ print "$_\n" }
untie %h ;
Here is the output from the code above.
mouse
Smith
Wall
There are a few point to bear in mind if you want to change the
ordering in a BTREE database:
1. The new compare function must be specified when you create the
database.
2. You cannot change the ordering once the database has been created.
Thus you must use the same compare function every time you access
the database.
3. Duplicate keys are entirely defined by the comparison function.
In the case-insensitive example above, the keys: 'KEY' and 'key'
would be considered duplicates, and assigning to the second one
would overwrite the first. If duplicates are allowed for (with the
R_DUP flag discussed below), only a single copy of duplicate keys
is stored in the database --- so (again with example above)
assigning three values to the keys: 'KEY', 'Key', and 'key' would
leave just the first key: 'KEY' in the database with three values.
For some situations this results in information loss, so care
should be taken to provide fully qualified comparison functions
when necessary. For example, the above comparison routine could
be modified to additionally compare case-sensitively if two keys
are equal in the case insensitive comparison:
And now you will only have duplicates when the keys themselves are
truly the same. (note: in versions of the db library prior to
about November 1996, such duplicate keys were retained so it was
possible to recover the original keys in sets of keys that
compared as equal).
Handling Duplicate Keys
The BTREE file type optionally allows a single key to be associated
with an arbitrary number of values. This option is enabled by setting
the flags element of $DB_BTREE to R_DUP when creating the database.
There are some difficulties in using the tied hash interface if you
want to manipulate a BTREE database with duplicate keys. Consider this
code:
use warnings ;
use strict ;
use DB_File ;
my ($filename, %h) ;
$filename = "tree" ;
unlink $filename ;
# Enable duplicate records
$DB_BTREE->{'flags'} = R_DUP ;
tie %h, "DB_File", $filename, O_RDWR|O_CREAT, 0666, $DB_BTREE
or die "Cannot open $filename: $!\n";
# Add some key/value pairs to the file
$h{'Wall'} = 'Larry' ;
$h{'Wall'} = 'Brick' ; # Note the duplicate key
$h{'Wall'} = 'Brick' ; # Note the duplicate key and value
$h{'Smith'} = 'John' ;
$h{'mouse'} = 'mickey' ;
# iterate through the associative array
# and print each key/value pair.
foreach (sort keys %h)
{ print "$_ -> $h{$_}\n" }
untie %h ;
Here is the output:
Smith -> John
Wall -> Larry
Wall -> Larry
Wall -> Larry
mouse -> mickey
As you can see 3 records have been successfully created with key "Wall"
- the only thing is, when they are retrieved from the database they
seem to have the same value, namely "Larry". The problem is caused by
the way that the associative array interface works. Basically, when the
associative array interface is used to fetch the value associated with
a given key, it will only ever retrieve the first value.
API in general.
Here is the script above rewritten using the "seq" API method.
use warnings ;
use strict ;
use DB_File ;
my ($filename, $x, %h, $status, $key, $value) ;
$filename = "tree" ;
unlink $filename ;
# Enable duplicate records
$DB_BTREE->{'flags'} = R_DUP ;
$x = tie %h, "DB_File", $filename, O_RDWR|O_CREAT, 0666, $DB_BTREE
or die "Cannot open $filename: $!\n";
# Add some key/value pairs to the file
$h{'Wall'} = 'Larry' ;
$h{'Wall'} = 'Brick' ; # Note the duplicate key
$h{'Wall'} = 'Brick' ; # Note the duplicate key and value
$h{'Smith'} = 'John' ;
$h{'mouse'} = 'mickey' ;
# iterate through the btree using seq
# and print each key/value pair.
$key = $value = 0 ;
for ($status = $x->seq($key, $value, R_FIRST) ;
$status == 0 ;
$status = $x->seq($key, $value, R_NEXT) )
{ print "$key -> $value\n" }
undef $x ;
untie %h ;
that prints:
Smith -> John
Wall -> Brick
Wall -> Brick
Wall -> Larry
mouse -> mickey
This time we have got all the key/value pairs, including the multiple
values associated with the key "Wall".
To make life easier when dealing with duplicate keys, DB_File comes
with a few utility methods.
The get_dup() Method
The "get_dup" method assists in reading duplicate values from BTREE
databases. The method can take the following forms:
$count = $x->get_dup($key) ;
@list = $x->get_dup($key) ;
%list = $x->get_dup($key, 1) ;
the method returns an associative array. The keys of the associative
array correspond to the values that matched in the BTREE and the values
of the array are a count of the number of times that particular value
occurred in the BTREE.
So assuming the database created above, we can use "get_dup" like this:
use warnings ;
use strict ;
use DB_File ;
my ($filename, $x, %h) ;
$filename = "tree" ;
# Enable duplicate records
$DB_BTREE->{'flags'} = R_DUP ;
$x = tie %h, "DB_File", $filename, O_RDWR|O_CREAT, 0666, $DB_BTREE
or die "Cannot open $filename: $!\n";
my $cnt = $x->get_dup("Wall") ;
print "Wall occurred $cnt times\n" ;
my %hash = $x->get_dup("Wall", 1) ;
print "Larry is there\n" if $hash{'Larry'} ;
print "There are $hash{'Brick'} Brick Walls\n" ;
my @list = sort $x->get_dup("Wall") ;
print "Wall => [@list]\n" ;
@list = $x->get_dup("Smith") ;
print "Smith => [@list]\n" ;
@list = $x->get_dup("Dog") ;
print "Dog => [@list]\n" ;
and it will print:
Wall occurred 3 times
Larry is there
There are 2 Brick Walls
Wall => [Brick Brick Larry]
Smith => [John]
Dog => []
The find_dup() Method
$status = $X->find_dup($key, $value) ;
This method checks for the existence of a specific key/value pair. If
the pair exists, the cursor is left pointing to the pair and the method
returns 0. Otherwise the method returns a non-zero value.
Assuming the database from the previous example:
use warnings ;
use strict ;
use DB_File ;
$x = tie %h, "DB_File", $filename, O_RDWR|O_CREAT, 0666, $DB_BTREE
or die "Cannot open $filename: $!\n";
$found = ( $x->find_dup("Wall", "Larry") == 0 ? "" : "not") ;
print "Larry Wall is $found there\n" ;
$found = ( $x->find_dup("Wall", "Harry") == 0 ? "" : "not") ;
print "Harry Wall is $found there\n" ;
undef $x ;
untie %h ;
prints this
Larry Wall is there
Harry Wall is not there
The del_dup() Method
$status = $X->del_dup($key, $value) ;
This method deletes a specific key/value pair. It returns 0 if they
exist and have been deleted successfully. Otherwise the method returns
a non-zero value.
Again assuming the existence of the "tree" database
use warnings ;
use strict ;
use DB_File ;
my ($filename, $x, %h, $found) ;
$filename = "tree" ;
# Enable duplicate records
$DB_BTREE->{'flags'} = R_DUP ;
$x = tie %h, "DB_File", $filename, O_RDWR|O_CREAT, 0666, $DB_BTREE
or die "Cannot open $filename: $!\n";
$x->del_dup("Wall", "Larry") ;
$found = ( $x->find_dup("Wall", "Larry") == 0 ? "" : "not") ;
print "Larry Wall is $found there\n" ;
undef $x ;
untie %h ;
prints this
Larry Wall is not there
Matching Partial Keys
The BTREE interface has a feature which allows partial keys to be
matched. This functionality is only available when the "seq" method is
used along with the R_CURSOR flag.
$x->seq($key, $value, R_CURSOR) ;
In the example script below, the "match" sub uses this feature to find
and print the first matching key/value pair given a partial key.
use warnings ;
use strict ;
use DB_File ;
use Fcntl ;
my ($filename, $x, %h, $st, $key, $value) ;
sub match
{
my $key = shift ;
my $value = 0;
my $orig_key = $key ;
$x->seq($key, $value, R_CURSOR) ;
print "$orig_key\t-> $key\t-> $value\n" ;
}
$filename = "tree" ;
unlink $filename ;
$x = tie %h, "DB_File", $filename, O_RDWR|O_CREAT, 0666, $DB_BTREE
or die "Cannot open $filename: $!\n";
# Add some key/value pairs to the file
$h{'mouse'} = 'mickey' ;
$h{'Wall'} = 'Larry' ;
$h{'Walls'} = 'Brick' ;
$h{'Smith'} = 'John' ;
$key = $value = 0 ;
print "IN ORDER\n" ;
for ($st = $x->seq($key, $value, R_FIRST) ;
$st == 0 ;
$st = $x->seq($key, $value, R_NEXT) )
{ print "$key -> $value\n" }
print "\nPARTIAL MATCH\n" ;
match "Wa" ;
match "A" ;
match "a" ;
undef $x ;
untie %h ;
Here is the output:
IN ORDER
Smith -> John
Wall -> Larry
Walls -> Brick
mouse -> mickey
PARTIAL MATCH
In order to make RECNO more compatible with Perl, the array offset for
all RECNO arrays begins at 0 rather than 1 as in Berkeley DB.
As with normal Perl arrays, a RECNO array can be accessed using
negative indexes. The index -1 refers to the last element of the array,
-2 the second last, and so on. Attempting to access an element before
the start of the array will raise a fatal run-time error.
The 'bval' Option
The operation of the bval option warrants some discussion. Here is the
definition of bval from the Berkeley DB 1.85 recno manual page:
The delimiting byte to be used to mark the end of a
record for variable-length records, and the pad charac-
ter for fixed-length records. If no value is speci-
fied, newlines (``\n'') are used to mark the end of
variable-length records and fixed-length records are
padded with spaces.
The second sentence is wrong. In actual fact bval will only default to
"\n" when the openinfo parameter in dbopen is NULL. If a non-NULL
openinfo parameter is used at all, the value that happens to be in bval
will be used. That means you always have to specify bval when making
use of any of the options in the openinfo parameter. This documentation
error will be fixed in the next release of Berkeley DB.
That clarifies the situation with regards Berkeley DB itself. What
about DB_File? Well, the behavior defined in the quote above is quite
useful, so DB_File conforms to it.
That means that you can specify other options (e.g. cachesize) and
still have bval default to "\n" for variable length records, and space
for fixed length records.
Also note that the bval option only allows you to specify a single byte
as a delimiter.
A Simple Example
Here is a simple example that uses RECNO (if you are using a version of
Perl earlier than 5.004_57 this example won't work -- see "Extra RECNO
Methods" for a workaround).
use warnings ;
use strict ;
use DB_File ;
my $filename = "text" ;
unlink $filename ;
my @h ;
tie @h, "DB_File", $filename, O_RDWR|O_CREAT, 0666, $DB_RECNO
or die "Cannot open file 'text': $!\n" ;
# Add a few key/value pairs to the file
$h[0] = "orange" ;
$h[1] = "blue" ;
$h[2] = "yellow" ;
unshift @h, "white" ;
my $first = shift @h ;
print "shifted $first\n" ;
# Check for existence of a key
print "Element 1 Exists with value $h[1]\n" if $h[1] ;
# use a negative index
print "The last element is $h[-1]\n" ;
print "The 2nd last element is $h[-2]\n" ;
untie @h ;
Here is the output from the script:
The array contains 5 entries
popped black
shifted white
Element 1 Exists with value blue
The last element is green
The 2nd last element is yellow
Extra RECNO Methods
If you are using a version of Perl earlier than 5.004_57, the tied
array interface is quite limited. In the example script above "push",
"pop", "shift", "unshift" or determining the array length will not work
with a tied array.
To make the interface more useful for older versions of Perl, a number
of methods are supplied with DB_File to simulate the missing array
operations. All these methods are accessed via the object returned from
the tie call.
Here are the methods:
$X->push(list) ;
Pushes the elements of "list" to the end of the array.
$value = $X->pop ;
Removes and returns the last element of the array.
$X->shift
Removes and returns the first element of the array.
$X->unshift(list) ;
Pushes the elements of "list" to the start of the array.
$X->length
Returns the number of elements in the array.
$X->splice(offset, length, elements);
Returns a splice of the array.
Another Example
Here is a more complete example that makes use of some of the methods
described above. It also makes use of the API interface directly (see
"THE API INTERFACE").
unlink $file ;
$H = tie @h, "DB_File", $file, O_RDWR|O_CREAT, 0666, $DB_RECNO
or die "Cannot open file $file: $!\n" ;
# first create a text file to play with
$h[0] = "zero" ;
$h[1] = "one" ;
$h[2] = "two" ;
$h[3] = "three" ;
$h[4] = "four" ;
# Print the records in order.
#
# The length method is needed here because evaluating a tied
# array in a scalar context does not return the number of
# elements in the array.
print "\nORIGINAL\n" ;
foreach $i (0 .. $H->length - 1) {
print "$i: $h[$i]\n" ;
}
# use the push & pop methods
$a = $H->pop ;
$H->push("last") ;
print "\nThe last record was [$a]\n" ;
# and the shift & unshift methods
$a = $H->shift ;
$H->unshift("first") ;
print "The first record was [$a]\n" ;
# Use the API to add a new record after record 2.
$i = 2 ;
$H->put($i, "Newbie", R_IAFTER) ;
# and a new record before record 1.
$i = 1 ;
$H->put($i, "New One", R_IBEFORE) ;
# delete record 3
$H->del(3) ;
# now print the records in reverse order
print "\nREVERSE\n" ;
for ($i = $H->length - 1 ; $i >= 0 ; -- $i)
{ print "$i: $h[$i]\n" }
# same again, but use the API functions instead
print "\nREVERSE again\n" ;
my ($s, $k, $v) = (0, 0, 0) ;
for ($s = $H->seq($k, $v, R_LAST) ;
$s == 0 ;
$s = $H->seq($k, $v, R_PREV))
{ print "$k: $v\n" }
1: one
2: two
3: three
4: four
The last record was [four]
The first record was [zero]
REVERSE
5: last
4: three
3: Newbie
2: one
1: New One
0: first
REVERSE again
5: last
4: three
3: Newbie
2: one
1: New One
0: first
Notes:
1. Rather than iterating through the array, @h like this:
foreach $i (@h)
it is necessary to use either this:
foreach $i (0 .. $H->length - 1)
or this:
for ($a = $H->get($k, $v, R_FIRST) ;
$a == 0 ;
$a = $H->get($k, $v, R_NEXT) )
2. Notice that both times the "put" method was used the record index
was specified using a variable, $i, rather than the literal value
itself. This is because "put" will return the record number of the
inserted line via that parameter.
THE API INTERFACE
As well as accessing Berkeley DB using a tied hash or array, it is also
possible to make direct use of most of the API functions defined in the
Berkeley DB documentation.
To do this you need to store a copy of the object returned from the
tie.
$db = tie %hash, "DB_File", "filename" ;
Once you have done that, you can access the Berkeley DB API functions
as DB_File methods directly like this:
$db->put($key, $value, R_NOOVERWRITE) ;
or die "Cannot tie filename: $!" ;
...
undef $db ;
untie %hash ;
See "The untie() Gotcha" for more details.
All the functions defined in dbopen are available except for close()
and dbopen() itself. The DB_File method interface to the supported
functions have been implemented to mirror the way Berkeley DB works
whenever possible. In particular note that:
o The methods return a status value. All return 0 on success. All
return -1 to signify an error and set $! to the exact error code.
The return code 1 generally (but not always) means that the key
specified did not exist in the database.
Other return codes are defined. See below and in the Berkeley DB
documentation for details. The Berkeley DB documentation should be
used as the definitive source.
o Whenever a Berkeley DB function returns data via one of its
parameters, the equivalent DB_File method does exactly the same.
o If you are careful, it is possible to mix API calls with the tied
hash/array interface in the same piece of code. Although only a
few of the methods used to implement the tied interface currently
make use of the cursor, you should always assume that the cursor
has been changed any time the tied hash/array interface is used.
As an example, this code will probably not do what you expect:
$X = tie %x, 'DB_File', $filename, O_RDWR|O_CREAT, 0777, $DB_BTREE
or die "Cannot tie $filename: $!" ;
# Get the first key/value pair and set the cursor
$X->seq($key, $value, R_FIRST) ;
# this line will modify the cursor
$count = scalar keys %x ;
# Get the second key/value pair.
# oops, it didn't, it got the last key/value pair!
$X->seq($key, $value, R_NEXT) ;
The code above can be rearranged to get around the problem, like
this:
$X = tie %x, 'DB_File', $filename, O_RDWR|O_CREAT, 0777, $DB_BTREE
or die "Cannot tie $filename: $!" ;
# this line will modify the cursor
$count = scalar keys %x ;
# Get the first key/value pair and set the cursor
$X->seq($key, $value, R_FIRST) ;
# Get the second key/value pair.
# worked this time.
$X->seq($key, $value, R_NEXT) ;
$status = $X->get($key, $value [, $flags]) ;
Given a key ($key) this method reads the value associated with it
from the database. The value read from the database is returned in
the $value parameter.
If the key does not exist the method returns 1.
No flags are currently defined for this method.
$status = $X->put($key, $value [, $flags]) ;
Stores the key/value pair in the database.
If you use either the R_IAFTER or R_IBEFORE flags, the $key
parameter will have the record number of the inserted key/value
pair set.
Valid flags are R_CURSOR, R_IAFTER, R_IBEFORE, R_NOOVERWRITE and
R_SETCURSOR.
$status = $X->del($key [, $flags]) ;
Removes all key/value pairs with key $key from the database.
A return code of 1 means that the requested key was not in the
database.
R_CURSOR is the only valid flag at present.
$status = $X->fd ;
Returns the file descriptor for the underlying database.
See "Locking: The Trouble with fd" for an explanation for why you
should not use "fd" to lock your database.
$status = $X->seq($key, $value, $flags) ;
This interface allows sequential retrieval from the database. See
dbopen for full details.
Both the $key and $value parameters will be set to the key/value
pair read from the database.
The flags parameter is mandatory. The valid flag values are
R_CURSOR, R_FIRST, R_LAST, R_NEXT and R_PREV.
$status = $X->sync([$flags]) ;
Flushes any cached buffers to disk.
R_RECNOSYNC is the only valid flag at present.
DBM FILTERS
A DBM Filter is a piece of code that is be used when you always want to
make the same transformation to all keys and/or values in a DBM
database. An example is when you need to encode your data in UTF-8
before writing to the database and then decode the UTF-8 when reading
from the database file.
There are two ways to use a DBM Filter.
1. Using the low-level API defined below.
There are four methods associated with DBM Filters. All work
identically, and each is used to install (or uninstall) a single DBM
Filter. Each expects a single parameter, namely a reference to a sub.
The only difference between them is the place that the filter is
installed.
To summarise:
filter_store_key
If a filter has been installed with this method, it will be
invoked every time you write a key to a DBM database.
filter_store_value
If a filter has been installed with this method, it will be
invoked every time you write a value to a DBM database.
filter_fetch_key
If a filter has been installed with this method, it will be
invoked every time you read a key from a DBM database.
filter_fetch_value
If a filter has been installed with this method, it will be
invoked every time you read a value from a DBM database.
You can use any combination of the methods, from none, to all four.
All filter methods return the existing filter, if present, or "undef"
in not.
To delete a filter pass "undef" to it.
The Filter
When each filter is called by Perl, a local copy of $_ will contain the
key or value to be filtered. Filtering is achieved by modifying the
contents of $_. The return code from the filter is ignored.
An Example -- the NULL termination problem.
Consider the following scenario. You have a DBM database that you need
to share with a third-party C application. The C application assumes
that all keys and values are NULL terminated. Unfortunately when Perl
writes to DBM databases it doesn't use NULL termination, so your Perl
application will have to manage NULL termination itself. When you write
to the database you will have to use something like this:
$hash{"$key\0"} = "$value\0" ;
Similarly the NULL needs to be taken into account when you are
considering the length of existing keys/values.
It would be much better if you could ignore the NULL terminations issue
in the main application code and have a mechanism that automatically
added the terminating NULL to all keys and values whenever you write to
the database and have them removed when you read from the database. As
I'm sure you have already guessed, this is a problem that DBM Filters
can fix very easily.
use warnings ;
use strict ;
use DB_File ;
# Install DBM Filters
$db->filter_fetch_key ( sub { s/\0$// } ) ;
$db->filter_store_key ( sub { $_ .= "\0" } ) ;
$db->filter_fetch_value( sub { s/\0$// } ) ;
$db->filter_store_value( sub { $_ .= "\0" } ) ;
$hash{"abc"} = "def" ;
my $a = $hash{"ABC"} ;
# ...
undef $db ;
untie %hash ;
Hopefully the contents of each of the filters should be self-
explanatory. Both "fetch" filters remove the terminating NULL, and both
"store" filters add a terminating NULL.
Another Example -- Key is a C int.
Here is another real-life example. By default, whenever Perl writes to
a DBM database it always writes the key and value as strings. So when
you use this:
$hash{12345} = "something" ;
the key 12345 will get stored in the DBM database as the 5 byte string
"12345". If you actually want the key to be stored in the DBM database
as a C int, you will have to use "pack" when writing, and "unpack" when
reading.
Here is a DBM Filter that does it:
use warnings ;
use strict ;
use DB_File ;
my %hash ;
my $filename = "filt" ;
unlink $filename ;
my $db = tie %hash, 'DB_File', $filename, O_CREAT|O_RDWR, 0666, $DB_HASH
or die "Cannot open $filename: $!\n" ;
$db->filter_fetch_key ( sub { $_ = unpack("i", $_) } ) ;
$db->filter_store_key ( sub { $_ = pack ("i", $_) } ) ;
$hash{123} = "def" ;
# ...
undef $db ;
untie %hash ;
This time only two filters have been used -- we only need to manipulate
the contents of the key, so it wasn't necessary to install any value
filters.
HINTS AND TIPS
Locking: The Trouble with fd
Until version 1.72 of this module, the recommended technique for
locking DB_File databases was to flock the filehandle returned from the
"fd" function. Unfortunately this technique has been shown to be
fundamentally flawed (Kudos to David Harris for tracking this down).
open(DB_FH, "+<&=$fd") || die "dup $!";
flock (DB_FH, LOCK_EX) || die "flock: $!";
...
$db{"Tom"} = "Jerry" ;
...
flock(DB_FH, LOCK_UN);
undef $db;
untie %db;
close(DB_FH);
In simple terms, this is what happens:
1. Use "tie" to open the database.
2. Lock the database with fd & flock.
3. Read & Write to the database.
4. Unlock and close the database.
Here is the crux of the problem. A side-effect of opening the DB_File
database in step 2 is that an initial block from the database will get
read from disk and cached in memory.
To see why this is a problem, consider what can happen when two
processes, say "A" and "B", both want to update the same DB_File
database using the locking steps outlined above. Assume process "A" has
already opened the database and has a write lock, but it hasn't
actually updated the database yet (it has finished step 2, but not
started step 3 yet). Now process "B" tries to open the same database -
step 1 will succeed, but it will block on step 2 until process "A"
releases the lock. The important thing to notice here is that at this
point in time both processes will have cached identical initial blocks
from the database.
Now process "A" updates the database and happens to change some of the
data held in the initial buffer. Process "A" terminates, flushing all
cached data to disk and releasing the database lock. At this point the
database on disk will correctly reflect the changes made by process
"A".
With the lock released, process "B" can now continue. It also updates
the database and unfortunately it too modifies the data that was in its
initial buffer. Once that data gets flushed to disk it will overwrite
some/all of the changes process "A" made to the database.
The result of this scenario is at best a database that doesn't contain
what you expect. At worst the database will corrupt.
The above won't happen every time competing process update the same
DB_File database, but it does illustrate why the technique should not
be used.
Safe ways to lock a database
Starting with version 2.x, Berkeley DB has internal support for
locking. The companion module to this one, BerkeleyDB
<https://metacpan.org/pod/BerkeleyDB>, provides an interface to this
locking functionality. If you are serious about locking Berkeley DB
databases, I strongly recommend using BerkeleyDB
Here are the three locking wrappers:
Tie::DB_Lock
A DB_File wrapper which creates copies of the database file for
read access, so that you have a kind of a multiversioning
concurrent read system. However, updates are still serial. Use for
databases where reads may be lengthy and consistency problems may
occur.
Tie::DB_LockFile
A DB_File wrapper that has the ability to lock and unlock the
database while it is being used. Avoids the tie-before-flock
problem by simply re-tie-ing the database when you get or drop a
lock. Because of the flexibility in dropping and re-acquiring the
lock in the middle of a session, this can be massaged into a
system that will work with long updates and/or reads if the
application follows the hints in the POD documentation.
DB_File::Lock
An extremely lightweight DB_File wrapper that simply flocks a
lockfile before tie-ing the database and drops the lock after the
untie. Allows one to use the same lockfile for multiple databases
to avoid deadlock problems, if desired. Use for databases where
updates are reads are quick and simple flock locking semantics are
enough.
Sharing Databases With C Applications
There is no technical reason why a Berkeley DB database cannot be
shared by both a Perl and a C application.
The vast majority of problems that are reported in this area boil down
to the fact that C strings are NULL terminated, whilst Perl strings are
not. See "DBM FILTERS" for a generic way to work around this problem.
Here is a real example. Netscape 2.0 keeps a record of the locations
you visit along with the time you last visited them in a DB_HASH
database. This is usually stored in the file ~/.netscape/history.db.
The key field in the database is the location string and the value
field is the time the location was last visited stored as a 4 byte
binary value.
If you haven't already guessed, the location string is stored with a
terminating NULL. This means you need to be careful when accessing the
database.
Here is a snippet of code that is loosely based on Tom Christiansen's
ggh script (available from your nearest CPAN archive in
authors/id/TOMC/scripts/nshist.gz).
use warnings ;
use strict ;
use DB_File ;
use Fcntl ;
my ($dotdir, $HISTORY, %hist_db, $href, $binary_time, $date) ;
$dotdir = $ENV{HOME} || $ENV{LOGNAME};
$HISTORY = "$dotdir/.netscape/history.db";
$href =~ s/\x00$// ;
# convert the binary time into a user friendly string
$date = localtime unpack("V", $binary_time);
print "$date $href\n" ;
}
# check for the existence of a specific key
# remember to add the NULL
if ( $binary_time = $hist_db{"http://mox.perl.com/\x00"} ) {
$date = localtime unpack("V", $binary_time) ;
print "Last visited mox.perl.com on $date\n" ;
}
else {
print "Never visited mox.perl.com\n"
}
untie %hist_db ;
The untie() Gotcha
If you make use of the Berkeley DB API, it is very strongly recommended
that you read "The untie Gotcha" in perltie.
Even if you don't currently make use of the API interface, it is still
worth reading it.
Here is an example which illustrates the problem from a DB_File
perspective:
use DB_File ;
use Fcntl ;
my %x ;
my $X ;
$X = tie %x, 'DB_File', 'tst.fil' , O_RDWR|O_TRUNC
or die "Cannot tie first time: $!" ;
$x{123} = 456 ;
untie %x ;
tie %x, 'DB_File', 'tst.fil' , O_RDWR|O_CREAT
or die "Cannot tie second time: $!" ;
untie %x ;
When run, the script will produce this error message:
Cannot tie second time: Invalid argument at bad.file line 14.
Although the error message above refers to the second tie() statement
in the script, the source of the problem is really with the untie()
statement that precedes it.
Having read perltie you will probably have already guessed that the
error is caused by the extra copy of the tied object stored in $X. If
you haven't, then the problem boils down to the fact that the DB_File
destructor, DESTROY, will not be called until all references to the
If you run the script with the "-w" flag the error message becomes:
untie attempted while 1 inner references still exist at bad.file line 12.
Cannot tie second time: Invalid argument at bad.file line 14.
which pinpoints the real problem. Finally the script can now be
modified to fix the original problem by destroying the API object
before the untie:
...
$x{123} = 456 ;
undef $X ;
untie %x ;
$X = tie %x, 'DB_File', 'tst.fil' , O_RDWR|O_CREAT
...
COMMON QUESTIONS
Why is there Perl source in my database?
If you look at the contents of a database file created by DB_File,
there can sometimes be part of a Perl script included in it.
This happens because Berkeley DB uses dynamic memory to allocate
buffers which will subsequently be written to the database file. Being
dynamic, the memory could have been used for anything before DB
malloced it. As Berkeley DB doesn't clear the memory once it has been
allocated, the unused portions will contain random junk. In the case
where a Perl script gets written to the database, the random junk will
correspond to an area of dynamic memory that happened to be used during
the compilation of the script.
Unless you don't like the possibility of there being part of your Perl
scripts embedded in a database file, this is nothing to worry about.
How do I store complex data structures with DB_File?
Although DB_File cannot do this directly, there is a module which can
layer transparently over DB_File to accomplish this feat.
Check out the MLDBM module, available on CPAN in the directory
modules/by-module/MLDBM.
What does "wide character in subroutine entry" mean?
You will usually get this message if you are working with UTF-8 data
and want to read/write it from/to a Berkeley DB database file.
The easist way to deal with this issue is to use the pre-defined "utf8"
DBM_Filter (see DBM_Filter) that was designed to deal with this
situation.
The example below shows what you need if both the key and value are
expected to be in UTF-8.
use DB_File;
use DBM_Filter;
my $db = tie %h, 'DB_File', '/tmp/try.db', O_CREAT|O_RDWR, 0666, $DB_BTREE;
$db->Filter_Key_Push('utf8');
$db->Filter_Value_Push('utf8');
call is wrong. Unfortunately there are quite a few parameters to get
wrong, so it can be difficult to figure out which one it is.
Here are a couple of possibilities:
1. Attempting to reopen a database without closing it.
2. Using the O_WRONLY flag.
What does "Bareword 'DB_File' not allowed" mean?
You will encounter this particular error message when you have the
"strict 'subs'" pragma (or the full strict pragma) in your script.
Consider this script:
use warnings ;
use strict ;
use DB_File ;
my %x ;
tie %x, DB_File, "filename" ;
Running it produces the error in question:
Bareword "DB_File" not allowed while "strict subs" in use
To get around the error, place the word "DB_File" in either single or
double quotes, like this:
tie %x, "DB_File", "filename" ;
Although it might seem like a real pain, it is really worth the effort
of having a "use strict" in all your scripts.
REFERENCES
Articles that are either about DB_File or make use of it.
1. Full-Text Searching in Perl, Tim Kientzle (tkientzle@ddj.com), Dr.
Dobb's Journal, Issue 295, January 1999, pp 34-41
HISTORY
Moved to the Changes file.
BUGS
Some older versions of Berkeley DB had problems with fixed length
records using the RECNO file format. This problem has been fixed since
version 1.85 of Berkeley DB.
I am sure there are bugs in the code. If you do find any, or can
suggest any enhancements, I would welcome your comments.
SUPPORT
General feedback/questions/bug reports should be sent to
<https://github.com/pmqs/DB_File/issues> (preferred) or
<https://rt.cpan.org/Public/Dist/Display.html?Name=DB_File>.
AVAILABILITY
DB_File comes with the standard Perl source distribution. Look in the
directory ext/DB_File. Given the amount of time between releases of
Perl the version that ships with Perl is quite likely to be out of
date, so the most recent version can always be found on CPAN (see
instead.
The official web site for Berkeley DB is
<http://www.oracle.com/technology/products/berkeley-db/db/index.html>.
All versions of Berkeley DB are available there.
Alternatively, Berkeley DB version 1 is available at your nearest CPAN
archive in src/misc/db.1.85.tar.gz.
COPYRIGHT
Copyright (c) 1995-2020 Paul Marquess. All rights reserved. This
program is free software; you can redistribute it and/or modify it
under the same terms as Perl itself.
Although DB_File is covered by the Perl license, the library it makes
use of, namely Berkeley DB, is not. Berkeley DB has its own copyright
and its own license. Please take the time to read it.
Here are a few words taken from the Berkeley DB FAQ (at
<http://www.oracle.com/technology/products/berkeley-db/db/index.html>)
regarding the license:
Do I have to license DB to use it in Perl scripts?
No. The Berkeley DB license requires that software that uses
Berkeley DB be freely redistributable. In the case of Perl, that
software is Perl, and not your scripts. Any Perl scripts that you
write are your property, including scripts that make use of
Berkeley DB. Neither the Perl license nor the Berkeley DB license
place any restriction on what you may do with them.
If you are in any doubt about the license situation, contact either the
Berkeley DB authors or the author of DB_File. See "AUTHOR" for details.
SEE ALSO
perl, dbopen(3), hash(3), recno(3), btree(3), perldbmfilter, DBM_Filter
AUTHOR
The DB_File interface was written by Paul Marquess <pmqs@cpan.org>.
perl v5.34.3 2023-12-14 DB_File(3)