FreeBSD manual
download PDF document: uchcom.4.pdf
UCHCOM(4) FreeBSD Kernel Interfaces Manual UCHCOM(4)
NAME
uchcom - WinChipHead CH341/CH340 serial adapter driver
SYNOPSIS
To compile this driver into the kernel, place the following lines in your
kernel configuration file:
device usb
device ucom
device uchcom
Alternatively, to load the driver as a module at boot time, place the
following line in loader.conf(5):
uchcom_load="YES"
DESCRIPTION
The uchcom driver provides support for the WinChipHead CH341/CH340 USB-
to-RS-232 Bridge chip.
The device is accessed through the ucom(4) driver which makes it behave
like a tty(4).
HARDWARE
The uchcom driver supports the following adapters:
o HL USB-RS232
FILES
/dev/ttyU* for callin ports
/dev/ttyU*.init
/dev/ttyU*.lock corresponding callin initial-state and lock-state
devices
/dev/cuaU* for callout ports
/dev/cuaU*.init
/dev/cuaU*.lock corresponding callout initial-state and lock-state
devices
SEE ALSO
tty(4), ucom(4), usb(4)
HISTORY
The uchcom driver first appeared in NetBSD. The first FreeBSD release to
include it was FreeBSD 8.0.
BUGS
Actually, this chip seems unable to drive other than 8 data bits and 1
stop bit line.
FreeBSD 14.0-RELEASE-p11 April 26, 2017 FreeBSD 14.0-RELEASE-p11