• Start
• Documentation
  • PostgreSQL
  • mnoGoSearch
  • Apache 2.4
  • FreeBSD handbook
  • FreeBSD Manual
  • FreeBSD Source
• Tools
• Search
• Protected Area

plain

FreeBSD manual

keyword 1 2 3 4 5 6 7 8 9 n l

download PDF document: wg-quick.8.pdf

WG-QUICK(8) WireGuard WG-QUICK(8)


NAME wg-quick - set up a WireGuard interface simply

SYNOPSIS wg-quick [ up | down | save | strip ] [ CONFIG_FILE | INTERFACE ]

DESCRIPTION This is an extremely simple script for easily bringing up a WireGuard interface, suitable for a few common use cases.
Use up to add and set up an interface, and use down to tear down and remove an interface. Running up adds a WireGuard interface, brings up the interface with the supplied IP addresses, sets up mtu and routes, and optionally runs pre/post up scripts. Running down optionally saves the current configuration, removes the WireGuard interface, and optionally runs pre/post down scripts. Running save saves the configuration of an existing interface without bringing the interface down. Use strip to output a configuration file with all wg-quick(8)-specific options removed, suitable for use with wg(8).
CONFIG_FILE is a configuration file, whose filename is the interface name followed by `.conf'. Otherwise, INTERFACE is an interface name, with configuration found at `/etc/wireguard/INTERFACE.conf', searched first, followed by distro-specific search paths.
Generally speaking, this utility is just a simple script that wraps invocations to wg(8) and ip(8) in order to set up a WireGuard interface. It is designed for users with simple needs, and users with more advanced needs are highly encouraged to use a more specific tool, a more complete network manager, or otherwise just use wg(8) and ip(8), as usual.

CONFIGURATION The configuration file adds a few extra configuration values to the format understood by wg(8) in order to configure additional attributes of an interface. It handles the values that it understands, and then it passes the remaining ones directly to wg(8) for further processing.
It infers all routes from the list of peers' allowed IPs, and automatically adds them to the system routing table. If one of those routes is the default route (0.0.0.0/0 or ::/0), then it uses ip-rule(8) to handle overriding of the default gateway.
The configuration file will be passed directly to wg(8)'s `setconf' sub-command, with the exception of the following additions to the Interface section, which are handled by this tool:

o Address -- a comma-separated list of IP (v4 or v6) addresses (optionally with CIDR masks) to be assigned to the interface. May be specified multiple times.
PostDown keys below may be used instead.
o MTU -- if not specified, the MTU is automatically determined from the endpoint addresses or the system default route, which is usually a sane choice. However, to manually specify an MTU to override this automatic discovery, this value may be specified explicitly.
o Table -- Controls the routing table to which routes are added. There are two special values: `off' disables the creation of routes altogether, and `auto' (the default) adds routes to the default table and enables special handling of default routes.
o PreUp, PostUp, PreDown, PostDown -- script snippets which will be executed by bash(1) before/after setting up/tearing down the interface, most commonly used to configure custom DNS options or firewall rules. The special string `%i' is expanded to INTERFACE. Each one may be specified multiple times, in which case the commands are executed in order.
o SaveConfig -- if set to `true', the configuration is saved from the current state of the interface upon shutdown. Any changes made to the configuration file before the interface is removed will therefore be overwritten.

Recommended INTERFACE names include `wg0' or `wgvpn0' or even `wgmgmtlan0'. However, the number at the end is in fact optional, and really any free-form string [a-zA-Z0-9_=+.-]{1,15} will work. So even interface names corresponding to geographic locations would suffice, such as `cincinnati', `nyc', or `paris', if that's somehow desirable.

EXAMPLES These examples draw on the same syntax found for wg(8), and a more complete description may be found there. Bold lines below are for options that extend wg(8).
The following might be used for connecting as a client to a VPN gateway for tunneling all traffic:
[Interface] Address = 10.200.100.8/24 DNS = 10.200.100.1 PrivateKey = oK56DE9Ue9zK76rAc8pBl6opph+1v36lm7cXXsQKrQM=
[Peer] PublicKey = GtL7fZc/bLnqZldpVofMCD6hDjrK28SsdLxevJ+qtKU= PresharedKey = /UwcSPg38hW/D9Y3tcS1FOV0K1wuURMbS0sesJEP5ak= AllowedIPs = 0.0.0.0/0 Endpoint = demo.wireguard.com:51820
The `Address` field is added here in order to set up the address for the interface. The `DNS` field indicates that a DNS server for the interface should be configured via resolvconf(8). The peer's allowed IPs entry implies that this interface should be configured as the default gateway, which this script does.
Building on the last example, one might attempt the so-called ``kill- fwmark) -m addrtype ! --dst-type LOCAL -j REJECT
The `PostUp' and `PreDown' fields have been added to specify an iptables(8) command which, when used with interfaces that have a peer that specifies 0.0.0.0/0 as part of the `AllowedIPs', works together with wg-quick's fwmark usage in order to drop all packets that are either not coming out of the tunnel encrypted or not going through the tunnel itself. (Note that this continues to allow most DHCP traffic through, since most DHCP clients make use of PF_PACKET sockets, which bypass Netfilter.) When IPv6 is in use, additional similar lines could be added using ip6tables(8).
Or, perhaps it is desirable to store private keys in encrypted form, such as through use of pass(1):
PostUp = wg set %i private-key <(pass WireGuard/private-keys/%i)
For use on a server, the following is a more complicated example involving multiple peers:
[Interface] Address = 10.192.122.1/24 Address = 10.10.0.1/16 SaveConfig = true PrivateKey = yAnz5TF+lXXJte14tji3zlMNq+hd2rYUIgJBgB3fBmk= ListenPort = 51820
[Peer] PublicKey = xTIBA5rboUvnH4htodjb6e697QjLERt1NAB4mZqp8Dg= AllowedIPs = 10.192.122.3/32, 10.192.124.1/24
[Peer] PublicKey = TrMvSoP4jYQlY6RIzBgbssQqY3vxI2Pi+y71lOWWXX0= AllowedIPs = 10.192.122.4/32, 192.168.0.0/16
[Peer] PublicKey = gN65BkIKy1eCE9pP1wdc8ROUtkHLF2PfAqYdyYBz6EA= AllowedIPs = 10.10.10.230/32
Notice the two `Address' lines at the top, and that `SaveConfig' is set to `true', indicating that the configuration file should be saved on shutdown using the current status of the interface.
A combination of the `Table', `PostUp', and `PreDown' fields may be used for policy routing as well. For example, the following may be used to send SSH traffic (TCP port 22) traffic through the tunnel:
[Interface] Address = 10.192.122.1/24 PrivateKey = yAnz5TF+lXXJte14tji3zlMNq+hd2rYUIgJBgB3fBmk= ListenPort = 51820 Table = 1234 PostUp = ip rule add ipproto tcp dport 22 table 1234 PreDown = ip rule delete ipproto tcp dport 22 table 1234
[Peer] PublicKey = xTIBA5rboUvnH4htodjb6e697QjLERt1NAB4mZqp8Dg= AllowedIPs = 0.0.0.0/0

# wg-quick up wgnet0
This will load the configuration file `/etc/wireguard/wgnet0.conf'.
The strip command is useful for reloading configuration files without disrupting active sessions:
# wg syncconf wgnet0 <(wg-quick strip wgnet0)

SEE ALSO wg(8), ip(8), ip-link(8), ip-address(8), ip-route(8), ip-rule(8), resolvconf(8).

AUTHOR wg-quick was written by Jason A. Donenfeld <Jason@zx2c4.com>. For updates and more information, a project page is available on the World Wide Web <https://www.wireguard.com/>.
ZX2C4 2016 January 1 WG-QUICK(8)