FreeBSD manual
download PDF document: sigvec.2.pdf
SIGVEC(2) FreeBSD System Calls Manual SIGVEC(2)
NAME
sigvec - software signal facilities
LIBRARY
Standard C Library (libc, -lc)
SYNOPSIS
#include <signal.h>
struct sigvec {
void (*sv_handler)();
int sv_mask;
int sv_flags;
};
int
sigvec(int sig, struct sigvec *vec, struct sigvec *ovec);
DESCRIPTION
This interface is made obsolete by sigaction(2).
The system defines a set of signals that may be delivered to a process.
Signal delivery resembles the occurrence of a hardware interrupt: the
signal is blocked from further occurrence, the current process context is
saved, and a new one is built. A process may specify a handler to which
a signal is delivered, or specify that a signal is to be blocked or
ignored. A process may also specify that a default action is to be taken
by the system when a signal occurs. Normally, signal handlers execute on
the current stack of the process. This may be changed, on a per-handler
basis, so that signals are taken on a special signal stack.
All signals have the same priority. Signal routines execute with the
signal that caused their invocation blocked, but other signals may yet
occur. A global signal mask defines the set of signals currently blocked
from delivery to a process. The signal mask for a process is initialized
from that of its parent (normally 0). It may be changed with a
sigblock(2) or sigsetmask(2) call, or when a signal is delivered to the
process.
When a signal condition arises for a process, the signal is added to a
set of signals pending for the process. If the signal is not currently
blocked by the process then it is delivered to the process. When a
signal is delivered, the current state of the process is saved, a new
signal mask is calculated (as described below), and the signal handler is
invoked. The call to the handler is arranged so that if the signal
handling routine returns normally the process will resume execution in
the context from before the signal's delivery. If the process wishes to
resume in a different context, then it must arrange to restore the
previous context itself.
When a signal is delivered to a process a new signal mask is installed
for the duration of the process' signal handler (or until a sigblock(2)
or sigsetmask(2) call is made). This mask is formed by taking the
current signal mask, adding the signal to be delivered, and or'ing in the
signal mask associated with the handler to be invoked.
The sigvec() function assigns a handler for a specific signal. If vec is
non-zero, it specifies a handler routine and mask to be used when
NAME Default Action Description
SIGHUP terminate process terminal line hangup
SIGINT terminate process interrupt program
SIGQUIT create core image quit program
SIGILL create core image illegal instruction
SIGTRAP create core image trace trap
SIGABRT create core image abort(3) call (formerly SIGIOT)
SIGEMT create core image emulate instruction executed
SIGFPE create core image floating-point exception
SIGKILL terminate process kill program
SIGBUS create core image bus error
SIGSEGV create core image segmentation violation
SIGSYS create core image non-existent system call invoked
SIGPIPE terminate process write on a pipe with no reader
SIGALRM terminate process real-time timer expired
SIGTERM terminate process software termination signal
SIGURG discard signal urgent condition present on
socket
SIGSTOP stop process stop (cannot be caught or
ignored)
SIGTSTP stop process stop signal generated from
keyboard
SIGCONT discard signal continue after stop
SIGCHLD discard signal child status has changed
SIGTTIN stop process background read attempted from
control terminal
SIGTTOU stop process background write attempted to
control terminal
SIGIO discard signal I/O is possible on a descriptor
(see fcntl(2))
SIGXCPU terminate process cpu time limit exceeded (see
setrlimit(2))
SIGXFSZ terminate process file size limit exceeded (see
setrlimit(2))
SIGVTALRM terminate process virtual time alarm (see
setitimer(2))
SIGPROF terminate process profiling timer alarm (see
setitimer(2))
SIGWINCH discard signal Window size change
SIGINFO discard signal status request from keyboard
SIGUSR1 terminate process User defined signal 1
SIGUSR2 terminate process User defined signal 2
Once a signal handler is installed, it remains installed until another
sigvec() call is made, or an execve(2) is performed. A signal-specific
default action may be reset by setting sv_handler to SIG_DFL. The
defaults are process termination, possibly with core dump; no action;
stopping the process; or continuing the process. See the above signal
list for each signal's default action. If sv_handler is SIG_IGN current
and pending instances of the signal are ignored and discarded.
If a signal is caught during the system calls listed below, the call is
normally restarted. The call can be forced to terminate prematurely with
an EINTR error return by setting the SV_INTERRUPT bit in sv_flags. The
affected system calls include read(2), write(2), sendto(2), recvfrom(2),
sendmsg(2) and recvmsg(2) on a communications channel or a slow device
(such as a terminal, but not a regular file) and during a wait(2) or
ioctl(2). However, calls that have already committed are not restarted,
Ignored signals remain ignored; the signal mask remains the same; signals
that interrupt system calls continue to do so.
NOTES
The mask specified in vec is not allowed to block SIGKILL or SIGSTOP.
This is done silently by the system.
The SV_INTERRUPT flag is not available in 4.2BSD, hence it should not be
used if backward compatibility is needed.
RETURN VALUES
The sigvec() function returns the value 0 if successful; otherwise the
value -1 is returned and the global variable errno is set to indicate the
error.
EXAMPLES
On the VAX-11 The handler routine can be declared:
void handler(sig, code, scp)
int sig, code;
struct sigcontext *scp;
Here sig is the signal number, into which the hardware faults and traps
are mapped as defined below. The code argument is either a constant as
given below or, for compatibility mode faults, the code provided by the
hardware (Compatibility mode faults are distinguished from the other
SIGILL traps by having PSL_CM set in the psl). The scp argument is a
pointer to the sigcontext structure (defined in <signal.h>), used to
restore the context from before the signal.
ERRORS
The sigvec() function will fail and no new signal handler will be
installed if one of the following occurs:
[EFAULT] Either vec or ovec points to memory that is not a
valid part of the process address space.
[EINVAL] The sig argument is not a valid signal number.
[EINVAL] An attempt is made to ignore or supply a handler for
SIGKILL or SIGSTOP.
SEE ALSO
kill(1), kill(2), ptrace(2), sigaction(2), sigaltstack(2), sigblock(2),
sigpause(2), sigprocmask(2), sigsetmask(2), sigsuspend(2), setjmp(3),
siginterrupt(3), signal(3), sigsetops(3), tty(4)
HISTORY
A sigvec() system call first appeared in 4.2BSD. It was reimplemented as
a wrapper around sigaction(2) in 4.3BSD-Reno.
BUGS
This manual page is still confusing.
FreeBSD 14.0-RELEASE-p11 April 2, 2022 FreeBSD 14.0-RELEASE-p11